Product Information

Product Specifics

  • BTUs: test
  • BTUs: 345
  • Choice: test-235
  • Choice: test-235
  • Choice: test-235
  • Brand: Archgard
  • Brand: Archgard
  • Brand: Archgard
  • Brand: Archgard
  • Brand: Stellar
  • Brand: Stellar
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Stellar
  • Brand: Stellar
  • Brand: Stellar
  • Brand: Archgard
  • Brand: Archgard
  • Brand: Archgard
  • Brand: Archgard
  • Brand: Archgard
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Iron Strike
  • Brand: Archgard
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Jotul
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Astria
  • Brand: Osburn
  • Brand: Osburn
  • Brand: Jackson Grill
  • Brand: Jackson Grill
  • Brand: Jackson Grill
  • Brand: Jackson Grill
  • Brand: Jackson Grill
  • Brand: Jackson Grill
  • Brand: Jackson Grill
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Primo
  • Brand: Primo
  • Brand: Primo
  • Brand: Primo
  • Brand: Black Olive
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Bull Grills
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Simplifire
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Dimplex
  • Brand: Stellar
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Pellet
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Gas
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: Wood
  • Fuel Type: NG
  • Fuel Type: LP
  • Fuel Type: LP
  • Fuel Type: Gas
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: LP
  • Fuel Type: NG
  • Fuel Type: LP
  • Fuel Type: LP
  • Fuel Type: LP
  • Fuel Type: LP
  • Fuel Type: LP
  • Fuel Type: Charcoal
  • Fuel Type: Charcoal
  • Fuel Type: Charcoal
  • Fuel Type: Charcoal
  • Fuel Type: Pellet
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: NG
  • Fuel Type: Wood
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Electric
  • Fuel Type: Gas
  • Style: Linear
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Linear
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Linear
  • Style: Traditional
  • Style: Modern
  • Style: Linear
  • Style: Linear
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Linear
  • Style: Linear
  • Style: Traditional
  • Style: Linear
  • Style: Linear
  • Style: Traditional
  • Style: Modern
  • Style: Modern
  • Style: Linear
  • Style: Traditional
  • Style: Traditional
  • Style: Linear
  • Style: Linear
  • Style: Linear
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Modern
  • Style: Linear
  • Style: Linear
  • Style: Modern
  • Style: Modern
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Linear
  • Style: Linear
  • Style: Linear
  • Style: Modern
  • Style: Modern
  • Style: Linear
  • Style: Linear
  • Style: Linear
  • Style: Modern
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Modern
  • Style: Modern
  • Style: Modern
  • Style: Modern
  • Style: Traditional
  • Style: Modern
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Traditional
  • Style: Modern
  • Style: Linear
  • Made in Canada: 1
  • Made in Canada: 1
  • Made in Canada: 1
  • Made in Canada: 1
  • Made in Canada: 1
  • Made in Canada: 1
  • Made in Canada: 1
  • BTU: 24000BTU
  • BTU: 34000
  • BTU: 40000
  • BTU: 32,000
  • BTU: 39000
  • BTU: 23000
  • BTU: 23000
  • BTU: 35000
  • BTU: 23000
  • BTU: 35000
  • BTU: 30000
  • BTU: 40000
  • BTU: 32000
  • BTU: 14250
  • BTU: 23500
  • BTU: 17000
  • BTU: 23500
  • BTU: 21000
  • BTU: 35000
  • BTU: 31000
  • BTU: 34000
  • BTU: 45000
  • BTU: 37000
  • BTU: up to 63000
  • BTU: 29500
  • BTU: 26000
  • BTU: 37000
  • BTU: 38000
  • BTU: 21,000
  • BTU: 25000
  • BTU: 31000
  • BTU: 34000
  • BTU: 11500
  • BTU: 35000
  • BTU: 40000
  • BTU: 50000
  • BTU: 20000
  • BTU: 24000
  • BTU: 50000 BTU
  • BTU: 50000
  • BTU: 40000
  • BTU: 35000
  • BTU: 60000
  • BTU: 40000
  • BTU: 27000
  • BTU: 41000
  • BTU: 20000
  • BTU: 1600
  • BTU: 17000
  • BTU: 45000
  • BTU: 40,000
  • BTU: 50000
  • BTU: 65000
  • BTU: 65000
  • BTU: 75000
  • BTU: 75000
  • BTU: 70000
  • BTU: 85000
  • BTU: 100,000
  • BTU: 50000
  • BTU: 50,000
  • BTU: 50,000
  • BTU: 65000
  • BTU: 65000
  • BTU: 75000
  • BTU: 75000
  • BTU: 70000
  • BTU: 100,000
  • BTU: 100000
  • BTU: 76000
  • BTU: 84,500
  • BTU: 79000
  • BTU: 76,000
  • BTU: 68000
  • BTU: 40000
  • BTU: 35000
  • BTU: 27000
  • BTU: 12000
  • BTU: 18000
  • BTU: 25000
  • BTU: 18000
  • BTU: 28000
  • BTU: 17000
  • BTU: 20000
  • BTU: 26000
  • BTU: 32000
  • BTU: 4000
  • BTU: 24000
  • BTU: 33000
  • BTU: 28000
  • BTU: 35000
  • BTU: 55000
  • BTU: 60000
  • BTU: 70000
  • BTU: 81000
  • BTU: Open Face Low efficient
  • BTU: Low Efficiency Bi Fold Doors
  • BTU: 55000
  • BTU: 80000
  • BTU: 55000
  • BTU: 50000
  • BTU: 70000
  • BTU: 35000
  • BTU: 70000
  • BTU: 37500
  • BTU: 73500
  • BTU: 73500
  • BTU: 88500
  • BTU: 8000
  • BTU: 12500
  • BTU: 10000
  • BTU: 90000
  • BTU: 105000
  • BTU: 60000
  • BTU: 60000
  • BTU: 30000
  • BTU: 100,000
  • Size: 40000
  • Size: 30000
  • Size: 250-1000 sq ft
  • Size: 500-1400 sq ft
  • Size: 500-1800 sq ft
  • Size: 600-1800 sq dt
  • Size: 500-2100 sq ft
  • Size: 500-2100 sq ft
  • Size: 800-2000 sq feet
  • Size: 500-2300 sq ft
  • Size: 800-2700 sq ft
  • Size: 500-1500 sq ft
  • Size: 500-2400 sq ft
  • Size: 500-1400 sq ft
  • Size: 600-1800 sq ft
  • Size: 600-1800 sq ft
  • Size: 500-2100 sq ft
  • Size: 500-2100 sq ft
  • Size: 800-2000 sq ft
  • Size: 800-2700 sq ft
  • Size: 2000-3000 sq feet
  • Size: 1200-2000 sq ft
  • Size: 2000-3500 sq ft
  • Size: 1600-2500 sq dt
  • Size: 1200-2000 sq ft
  • Size: 700-1400 sq ft
  • Size: 38500
  • Size: Up to 600 sq ft
  • Size: up to 800 sq ft
  • Size: up to 1300 sq ft
  • Size: up to 1500 sq ft
  • Size: Up to 2000 sq ft
  • Size: Up to 1500 sq feet
  • Size: 42000
  • Size: Up to 1800 sq feet
  • Size: Up to 2000 sq feet
  • Size: up to 2500 sq feet
  • Size: 55000
  • Size: 58500
  • Section 2 Body: 

    Appearance: Dark grey/black powder

    Specific Gravity: .22 - .23

    Pour Point: 2150°C

  • Section 2 Body: 

    As a flocculant Earth Pro AE 851 can be added directly to the flow line or it may be dispersed in water in the chemical barrel prior to adding to the flow line. 

    Earth Pro AE 851 becomes very slippery when it comes in contact with water. A spill should be cleaned up with an absorbent material. 

  • Section 2 Body: 

    Appearance: White powder

    Specific Gravity: 1.6

  • Section 2 Body: 

    Appearance: Amber liquid, petroleum odor

    Specific Gravity: .96

    Flash Point: 73.3°C (TCC)

  • Section 2 Body: 

    Earth Pro Chem Clean Green can be applied neat or diluted with water depending on the difficulty of a particular cleanup.

    For extra heavy duty degreasing, Earth Pro Chem Clean Green can be used full strength. For routine cleaning, use Earth Pro Chem Clean Green can be diluted at 1:5 water. 

    Skin and eye protection should be observed (see MSDS). Do not use Earth Pro Chem Clean Green on hot surfaces and hot or running motors. 

  • Section 2 Body: 

    Appearance: Light tan powder

    Specific Gravity: .9

    Pour Point: N/A

    Flash Point: Not flammable

  • Section 2 Body: 

    Earth Pro Corinox does not require any cumbersome equipment such as manual or automatic injection systems; therefore, it eliminates the problems of equipment failure and the cost of equipment rental and maintenance. 

    Avoid contact with eyes, skin and clothing. In case of contact, immediately wash with plenty of water. Flush eyes with flowing water immediately and continuously for twenty minutes. See a physician if necessary. Remove contaminated clothes and shoes. Wash before re-use. 

  • Section 2 Body: 

    For maximum effectiveness, Earth Pro Defoamer Silicone should be added directly to the fluid system as close to the point of foaming as possible. 

    Avoid contact with eyes, skin and clothing. In case of contact, immediately wash with plenty of water, flush eyes with flowing water immediately and continuously for 15 minutes. 

  • Section 2 Body: 

    Actual amount required depends upon the amount of solids present in the system, concentrations for normal use range from 0.4 - 4.0 L/m³ (requirements are typically 1/4 that of lignosulphonate).

    Earth Pro Di-Sperse 72L should be added directly to the mud system. This product is stable at high and low temperatures and has excellent freeze-thaw stability.

    The thinning efficiency of Earth Pro Di-Sperse 72L is actually improved by the presence of moderate levels of calcium up to a maximum of 800-1000 mg/L.

  • Section 2 Body: 

    Actual amount required depends upon the amount of solids present in the system, concentrations for normal use range from 0.3 - 3.0 L/m³ (requirements are typically 1/4 that of lignosulphonate).

    A highly concentrated pill of Earth Pro Di-Sperse 74 will induce well cake breakdown prior to completion, cementing or stimulation operations. 

    Earth Pro Di-Sperse 74 should be added directly to the mud system through a mud hopper. This product is stable at high and low temperatures and has excellent freeze-thaw stability. 

  • Section 2 Body: 

    Earth Pro Drilling Detergent L can be irritating to the skin and eyes. Inhalation may cause nausea, vomiting and dizziness. In case of skin contacts wash with water.

    In case of eye contact flush with water for fifteen minutes and seek medical attention. If ingested induce vomiting immediately and get patient to a physician.

    *Danger* - This product contains ethylene glycol and lack of attention may cause kidney and liver damage.

  • Section 2 Body: 

    Oil mud systems using Earth Pro Emul can be prepared using the proper amounts of oil, water, lime, Earth Pro Emul and electrolytes to form a stable invert emulsion.

    Although the use range can vary with well conditions the general addition rate would be 5.0 – 20.0 L/m³. For example a concentration of 5 L/m³ Earth Pro Emul will provide a stable invert emulsion in unweighted muds.

    Muds weighted to 1400 kg/m³ will require 15 L/m³ Earth Pro Emul as additional emulsifier is required to oil wet the suspended solids.

  • Section 2 Body: 

    Defoaming is a complex reaction, therefore, pilot testing may be necessary to determine optimum treatment rates and methods. Recommended treatment concentrations will vary depending on the severity of foaming, however, 0.5-1.5 L/m³ will be effective in most cases.

    For maximum effectiveness, Earth Pro Foam Slayer should be added directly to the fluid system, as close to the point to foaming as possible.

  • Section 2 Body: 

    Earth Pro K2 Plus can be added directly to the mud system either on surface or through the mixing system. Avoid eye and skin contact, should contact occur, flush thoroughly with water and seek proper medical attention.

    Wear plastic or latex gloves and chemical splash goggles. Do not wear contact lenses when handling this material. Wear chemical impervious clothing. Wash thoroughly after handling. Keep containers tightly closed at all times.

  • Section 2 Body: 

    Appearance: Light brown liquid

    Specific Gravity: 1.06

    Flash Point: >125°C

  • Section 2 Body: 

    Additions can be made directly into the system at an area of good agitation. Normal safety precautions should be adhered to as with any drilling fluids product.

  • Section 2 Body: 

    Appearance: White-tan powder

  • Section 2 Body: 

    Appearance: Tan colored liquid

    Specific Gravity: 1.05

    Boiling Point: 280°C

  • Section 2 Body: 

    Appearance: Red powder

  • Section 2 Body: 

    Appearance: Amber liquid

    Specific Gravity: 1.08

    Pour Point: -15°C

    Flash Point: >100°C

  • Section 2 Body: 

    Although the use range can vary with well conditions the general addition rate would be 0.5-5 L/m³. It is indicated to maintain at all-time an adequate concentration of oil-wetting agent in the mud to prevent water-wetting of solids. Employ rubber gloves, rubber apron, and skin and eye protection and ensure mixing is done in an area with adequate ventilation.

  • Section 2 Body: 

    Appearance: Tan-grey powder

    Specific Gravity: 2.45 - 2.55

    Bulk Density: 881 - 885 kg/m³

    Flash Point: 10% maximum

    Particle Size: 80% passing 200 mesh (75µ)

  • Section 2 Body: 

    Appearance: Clear liquid, sweet odor

    Specific Gravity: 0.89

    Flash Point: >80°C (PMCC)

  • Section 2 Body: 

    Use the chemical barrel to dissolve the water-soluble package. The water temperature in the chemical barrel should be above 10°C to dissolve the package. Open the outer poly bag and add the water-soluble package of 2K7 directly into the chemical barrel. Agitate until the package and product is dissolved then add to the system as needed.

    NOTE: Flush chemical barrel with water prior to adding 2K7. Caustic Soda will greatly reduce the ability of 2K7 to control bacteria.

  • Section 2 Body: 

    Because of its excellent dispersibility and mixing Alcomer 60RD can be added directly to the mud system without pre-wetting in a solvent.

    A small hole should be cut into the bottom of the bag, allowing it to flow at a steady rate into the mud hopper. If necessary Alcomer 60RD can be prehydrated at concentrations of 10.0-15.0 kg/m³ in a separate tank and fed into the main circulating system to maintain concentrations of 2.0-6.0 kg/m³.

    Alcomer 60RD becomes very slippery when it comes in contact with water. A spill should be cleaned up with an absorbent material. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Alcomer 120L OS may be mixed directly into the active mud system, premixed at higher concentrations prior to blending into the system or added through the hopper.

    Like all PHPA polymers, Alcomer 120L OS is sensitive to calcium and subject to shear degradation. The mix water or base bentonite slurry should be pre-treated with Soda Ash.

    Alcomer 120L OS can be chemically broken down with household liquid bleach (5% sodium hypochlorite) at a concentration of one gal per 100 gal of Alcomer 120L OS fluid. Do not use solid calcium hypochlorite or perfumed liquid bleach to break down Alcomer 120L OS.

  • Section 2 Body: 

    Mix Alcomer 755 / Zetag 7557 slowly into a chemical barrel or polymer mixing tank and allow product to hydrate. Avoid mixing too rapidly. Wear a mask and goggles to prevent dust inhalation and contact with eyes.

    Alcomer 755 / Zetag 7557 becomes very slippery when it comes in contact with water, therefore spills should be cleaned up with an absorbent
    material instead of water.

  • Section 2 Body: 

    Mix Alcomer 758 / Zetag 7587 slowly into a chemical barrel or polymer mixing tank and allow product to hydrate. Avoid mixing too rapidly. Wear a mask and goggles to prevent dust inhalation and contact with eyes.

    Alcomer 758 / Zetag 7587 becomes very slippery when it comes in contact with water, therefore spills should be cleaned up with an absorbent material instead of water.

  • Section 2 Body: 

    Appearance: White granules

    Specific Gravity: 0.80 @ 25°C

    Flash Point: >93°C (will burn)

  • Section 2 Body: 

    Aluminum Stearate should be added through a chemical barrel at the flow line or injected directly into a centrifuge from a premixed polymer tank, usually in a 0.5% stock solution. It can also be used for fluid clarification when added at the centrifuge in sumpless drilling operations.

    Aluminum Stearate should be stored in a dry, cool environment. Some dust will occur while mixing. Care should be taken to avoid contact with the eyes. If contact is made, rinse the eyes for five to fifteen minutes with water. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Appearance: Off white powder

    Density: 1.5

    Moisture Content: <12%

  • Section 2 Body: 

    To calculate the amount of Barite required to raise the weight use the following formula:

    Barite kg/m³ equals 4200 (W2 - W1) divided by 4200 - W2

    where W1 = present mud weight in kg/m³
    where W2 = desired mud weight in kg/m³

    Every 100 sacks of Barite added will increase the volume of the system by one cubic meter.

  • Section 2 Body: 

    Cal Carb 0 may be added directly at the suction with agitation or through the mud hopper. To avoid settling out in the surface tanks the fluid viscosity should be raised sufficiently to provide adequate suspension. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Cal Carb Poultry Grit may be added directly through the hopper. To minimize settling in the surface tanks, the fluid should be of sufficient viscosity, or the agitation such that the particles are kept in suspension. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Cal Carb Supercal - Glass Rock may be added directly through the hopper. To minimize settling in the surface tanks, the fluid should be of sufficient viscosity, or the agitation such that the particles are kept in suspension. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Appearance: White powder

    Specific Gravity: 2.2

    Boiling Point: 1670°C

    Melting Point: 772°C

  • Section 2 Body: 

    Appearance: Off white powder

    Specific Gravity: 1.12

    Bulk Density: 1.06 kg/m³

  • Section 2 Body: 

    Caustic Potash is a strong alkali and produces a strong basic solution. The reaction with water generates heat. Always add potassium hydroxide to water and watch for bubbling and splashing.

    Caustic Potash will cause severe burns and skin/eye contact is to be avoided at all times. Wear full clothing, rubber gloves and goggles or face mask. The use of a rubber protective apron is also recommended.

    In the event of contact wash immediately with water for at least fifteen minutes. Seek medical attention, especially if burning persists or the contacted area is inflamed. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 
    Caustic Soda pH p-Alkalinity
    1.00 kg/m³ 8.5 - 9.0 0.1 - 0.25
    2.20 kg/m³ 10.0 - 10.5 0.5 - 0.7
    2.90 kg/m³ 11.0 - 12.0 0.8 - 1.0
    5.80 kg/m³ 14.0 3.0
  • Section 2 Body: 

    The loss of circulation during a primary cementing job is a serious problem. It usually results in having to do some remedial cementing. Circulation losses tend to occur in vuggy cavernous formations and particularly in highly fractured incompetent zones. These zones may break down at relatively low hydrostatic pressures. For this reason Cellophane has found a wide application in routine cementing operations. Application rates may vary between 1-20 kg/m³ with normal applications around 5 kg/m³ of cement. At concentrations above 20 kg/m³, bulk loading and mixing of the cement slurry becomes extremely difficult. Cellophane has temperature limitations, but even in high temperature environments, the material is generally effective long enough to merit its presence. 

  • Section 2 Body: 

    CF Desco II can be mixed directly through the mud hopper. It is advisable to use a dust mask and eye protection while mixing all powdered products.

    CF Desco II may cause irritation to the eyes. If contacted with the eyes, flush immediately with running water for at least fifteen minutes. If irritation develops, seek medical attention.

  • Section 2 Body: 

    Employ rubber gloves, rubber apron and skin and eye protection and ensure mixing is done in an area where adequate ventilation is available.

  • Section 2 Body: 

    Although Citric Acid is of low hazard and toxicity, excess exposure to dust should be avoided to prevent irritation to the eyes, skin and respiratory tract. As with all organic material, caution is advised when storing or handling near strong oxidizing agents, alkali metals or strong bases.

  • Section 2 Body: 

    Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH approved and full protective gear. Irritating and highly toxic gases may be generated by thermal decomposition or combustion. Non-combustible, substance does not burn but may decompose upon heating to produce irritating, corrosive and/or toxic fumes.

  • Section 2 Body: 

    Appearance: White granular powder

    Bulk Density: 512-560 kg/m³

  • Section 2 Body: 

    Drispac (Plus) should be stored in a dry location. In order to avoid lumping it is added to the mud system through the hopper at 30-40 minutes per sack. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Appearance: Aromatic amber liquid

    Specific Gravity: .916

    Bulk Density: 480-560 kg/m³

    Flash Point: 18°C

    Boiling Point: 83°C

  • Section 2 Body: 

    Appearance: Grey to tan granules

    Specific Gravity: 2.45 - 2.55

    Bulk Density: 480 - 560 kg/m³

    Grind Size: Medium (100% passing 3/8" mesh)

  • Section 2 Body: 

    Extra High Yield Bentonite is dry clay and therefore requires high shear and agitation for proper hydration. It should be mixed no faster than five minutes per sack and should always be mixed before polymers. Cold water increases mixing time.

    Extra High Yield Bentonite loses effectiveness in hard, low pH or salt water. To achieve the maximum yield of 220-235 bbl, the makeup water should be treated with soda ash (sodium carbonate) to a pH of 8.0-9.0. Do not use salt water since it cannot be treated.

  • Section 2 Body: 

    Appearance: Tan colored, fibrous powder

    Boiling Point: 280 - 360 kg/m³

  • Section 2 Body: 

    Appearance: Black-brown powder

    Specific Gravity: 1.06

    Moisture Content: 1.0%

    Flash Point: 316%

  • Section 2 Body: 

    Appearance: Clear glass beads

    Specific Gravity: 2.5 - 2.9

    Flash Point: 600°C

  • Section 2 Body: 

    Appearance: Spherical black particles

    Specific Gravity: 1.70 - 1.85

  • Section 2 Body: 

    Appearance: Amber liquid

    Specific Gravity: .824 @ 15.6°C

    Melting Point: -40°C

    Flash Point: 52.2°C (SFCC)

  • Section 2 Body: 

    Appearance: Dark brown/black powder

    Specific Gravity: 1.5 approx. 

    Moisture: 30-35%

    Content: 51.9 lbs/ft³

  • Section 2 Body: 

    Appearance: Fine white powder

    Specific Gravity: 2.3 - 2.4

    Bulk Density: 320 - 690 kg/m³

  • Section 2 Body: 

    Appearance: White granules

    Specific Gravity: 0.80 @ 25°C

  • Section 2 Body: 

    Appearance: Off-white powder

    Specific Gravity: 0.65

    Bulk Density: 0.7 kg/m³

  • Section 2 Body: 

    Because of its excellent dispersibility and mixing, Hyperdrill AF 247RD can be added directly to the mud system without pre-wetting in a solvent.

    A small hole should be cut into the bottom of the bag, allowing it to flow at a steady rate into the mud hopper. If necessary Hyperdrill AF 247RD may be pre-hydrated at concentrations of 10.0-15.0 kg/m³ in a separate tank and fed into the main circulating system to maintain concentrations of 2.0-6.0 kg/m³.

    Hyperdrill AF 247RD becomes very slippery when it comes in contact with water. A spill should be cleaned up with an absorbent material. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Appearance: White powder

  • Section 2 Body: 

    Appearance: White powder

    Bulk Density: 800 - 880 kg/m³

  • Section 2 Body: 

    Appearance: White powder

  • Section 2 Body: 

    Appearance: White granular powder

    Bulk Density: 0.7 kg/m³

  • Section 2 Body: 

    Appearance: White-tan powder

  • Section 2 Body: 

    Magma Fiber can be mixed through the hopper or added directly to the mud tanks wherever there is adequate agitation. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Appearance: White, free-flowing powder

    Specific Gravity: 0.75 - 1.0

  • Section 2 Body: 

    Magnesium Oxide can be added through the hopper or mixed directly to the system at a point of agitation. It is advisable to use a dust mask and eye protection while mixing Magnesium Oxide or any other powdered material.

  • Section 2 Body: 

    Appearance: Grey-black flakes

    Specific Gravity: 2.7 - 2.9

  • Section 2 Body: 

    Appearance: Off-white powder

    Specific Gravity: 1.38 g/cc

    Bulk Density: 0.5 - 0.7 g/cc (untamped, tamped)

  • Section 2 Body: 

    The extending properties of bentonite can be greatly enhanced if the material is allowed to completely hydrate in the mix water prior to slurry mixing. The presence of high concentrations of calcium ion in the aqueous phase of cement slurry inhibits the hydration of Naturalgel.

  • Section 2 Body: 

    Appearance: Cream colored powder

    Specific Gravity: 1.7

  • Section 2 Body: 

    Polydrill can be added directly into the mud system through the mixing hopper. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Polythin can be added directly into the mud system through the mixing hopper. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Appearance: White crystalline powder

    Specific Gravity: 1.98

  • Section 2 Body: 

    Prima-Seal can be mixed directly into a viscous mud with good agitation. Larger sizes will plug shale shaker screens. If re-circulation is necessary, the shale shaker should be by-passed.

    However, bypassing the shaker could result in plugged jets. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Appearance: White powder

    Bulk Density: 880 - 1041 kg/m³

    Particle Size: Less than 20 mesh (850 microns)

  • Section 2 Body: 

    Appearance: Black granular

    Specific Gravity: 0.7 - 1.11

    Flash Point: 320°C

  • Section 2 Body: 

    Appearance: Dark amber liquid

    Specific Gravity: 0.91 - 0.92

    Pour Point: -29°C

    Flash Point: 43°C

  • Section 2 Body: 

    Appearance: Fine white powder

    Specific Gravity: 1.862

    Bulk Density: 800 kg/m³

    Melting Point: 650°C

  • Section 2 Body: 

    Appearance: Grey to tan powder

    Specific Gravity: 1.9 - 2.4

    Particle Size: 4.3% > 200 mesh

    Free Moisture: 11.6%

    Loss on Ignition: 15.7%

    Bulk Density: 1200 - 1280 kg/m³

  • Section 2 Body: 

    Appearance: Red wax-like tube

    Specific Gravity: 1.07

    Melting Point: 49°C

  • Section 2 Body: 

    Appearance: White odorless powder

    Specific Gravity: 2.53

    Bulk Density: 1073 kg/m³

    Moisture Content: 0.04%

  • Section 2 Body: 

    Sodium Bicarbonate can be added directly through the hopper. Avoid inhaling and minimize skin contact. It absorbs moisture and dries the skin. Keep stored in a cool dry place to prevent caking and deterioration. Store away from acids. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Type: Bactericide

    Solubility: Miscible

    pH: <12.0

  • Section 2 Body: 

    Appearance: White crystalline powder

    Specific Gravity: 2.63

  • Section 2 Body: 

    Appearance: Light colored powder

    Specific Gravity: 1.6

  • Section 2 Body: 

    Appearance: Off-white powder

    Bulk Density: 480 - 640 kg/m³

    Moisture Content: 6 - 10%

  • Section 2 Body: 

    Appearance: White crystalline

    Specific Gravity: 2.126

    Moisture Content: 0.05%

  • Section 2 Body: 

    Appearance: Clear liquid

    Specific Gravity: 1.0634 @ 15°C

    Freezing Point: -6°C

  • Section 2 Body: 

    Appearance: White granules or powder

    Molecular Weight: 330.34

    Bulk Density: 0.96 - 1.2 g/cc

  • Section 2 Body: 

    Appearance: Yellow-brown liquid

    Specific Gravity: 1.04 - 1.06

    Flash Point: >91°C (Setaflash CC)

  • Section 2 Body: 

    Ultra Seal can be mixed through the mud hopper or directly into the mud system at a point of agitation.

    Note: A dust hazard is present while Ultra Seal is being mixed. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    Appearance: Tan, granular or flour-like solid

    Specific Gravity: 1.2 - 1.4

  • Section 2 Body: 

    Appearance: Cream-tan powder

    Moisture Content: 13.3%

    Bulk Density: 640 - 961 kg/m³

  • Section 2 Body: 

    Appearance: White crystalline powder

    Specific Gravity: 4.4

  • Section 2 Body: 

    Earth Pro Oilwell ‘G’ Cement is not hazardous. However, if product becomes wet through unforeseen circumstances, some heat will be given off due to hydration. Avoid excessively humid conditions. Store in a cool dry place.

    Earth Pro Oilwell ‘G’ Cement contains free silica. Avoid breathing dust, and wear appropriate dust mask as a precaution. When product is mixed with water, some heat evolution will occur. Caution should be exercised to mix continually until ready to place the slurry in the dump-bail.

    Since Earth Pro Oilwell ‘G’ Cement is caustic in nature (pH 10-12), and will cause severe burns to the eyes and other sensitive skin areas. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 2 Body: 

    Appearance: Red powder

  • Section 2 Body: 

    Appearance: Clear liquid

    Density: 0.85 - 0.88 g/cc @ 20°C

  • Section 2 Body: 

    Oilfield Cementing: Typical use on a small scale is for dump-bail treatments. The product is batched in small volumes according to the following blend table, and dumped down the wellbore using conventional rig equipment. After a period of time the cement sets, providing a small, hard plug in the problem area.

      Approximate Working Time (Hrs:Min at BHT)
    Bag Size (kg) Water Requirement (liters) Slurry Yield (liters) Density (kg/m³) 20°C 30°C
    20 8.2 14.9 1885 2:30  2:00 

     

    Compressive Strength, MPa @ 20 to 30°C (16-24 hours) 2.5, 5.0 3.8, 6.1

    NOTE: Strengths are for reference only. Actual values may vary due to changing wellbore conditions, variations in density, and water quality. Samples should be taken at the time of treatment and observed at estimated wellbore temperature for strength development.

    At temperatures below 30°C, calcium chloride can be added in a small amount, to accelerate the set time if required. Typical dosage is 0.5-1% w/w, depending on well depth and wellbore temperature. Slurry viscosity and working time will be reduced substantially. (Exercise extreme care in the addition of calcium chloride. In itself calcium chloride is a corrosive material and will cause skin burns. If poorly mixed, it can cause excessive heat through hydration, potentially leading to a flash set of the cement before placement has occurred.)

    Oilfield Cementing, High Temperature Application: This cement blend is not designed for use where wellbore temperatures exceed 30-40°C during plug placement. However, Earth Pro Thermal 40 Cement is stable to +/-360°C, providing the optimum slurry density of 1880-1900 kg/m³ is maintained. Long-term effects (30 days or more at 300-340°C) indicate only minor loss in compressive strength, and a slight increase in permeability.

    Earth Pro Thermal 40 Cement will meet the ERCB Specification in Directive 20, Open Hole Abandonment Requirements, Section 4.2, “Open-Hole Abandonment of Wells That Have Penetrated Oil Sands Zones”, and will provide a minimum compressive strength of 3500 kPa in 48 hours at temperatures up to 360°C.

  • Section 2 Body: 
    Test Items Units Limits
    Particle size >20 mesh (841 microns), max Wt% 0
    API/ISO Static Fluid Loss @ 40°C, max (see note for slurry formation) ml <30
    Specific Gravity - 1.60 +/- 0.05 g/cm³
    pH (1% solution in water) - 6.0 - 8.0

    Note - For laboratory testing the following weights for standard density slurry are to be used: Earth Pro Oilwell 'G' Cement: 792.0 g, tap water: 349.0 g, Earth Pro FLA-6: 5.54 g, LTR (Low Temperature Retarder): 3.17 g, liquid defoamer: 0.7 mL. The fluid loss test is performed at 40°C and 1000 PSI.

  • Section 2 Body: 

    Oilfield Cementing: Typical use on a small scale is for dump-bail treatments. The product is batched in small volumes according to the following blend table, and “dumped” down the wellbore using wireline equipment. The slurry flows out and the bail is retracted slowly and removed, allowing the plug to set in place.

    Note: Strengths are for reference only. Actual values may vary due to changing wellbore conditions, variations in density, accuracy of mixing volumes and water quality. Samples should be taken at the time of treatment and observed at estimated wellbore temperature for strength development. Samples will not set on surface without application of heat.

  • Section 2 Body: 
    Slurry Volume per Pail (20kg) ResinBond 13.6 liters
    Slurry Density 1840 kg/m³
    pH 6.0 - 8.0 (1% w/v demineralized water)
    Compressive Strength > 10 MPa in 24 hours

    Earth Pro ResinBond Cement is a unique blend of polymer and high purity gypsum that has been purposely designed to provide 90-120 minutes of open time, or fluid state to enable proper mixing and displacement to the desired plug zone.

    Combined with RB Catalyst, low viscosity fluid properties are maintained for 30 - 60 minutes at BHT provided proper mixing procedures are followed, and product does not become contaminated. This enables confident placement at a wide variety of depths and wellbore temperatures.

    Due to this delay feature, should another plug of the same type be required on top of the first one, a certain amount of waiting time is necessary to ensure adequate strength on the preceding plug to prevent disturbance of the weak bonds.

    Generally, a minimum of 4 hours is required to allow proper set and initial cure before another similar plug may be placed on top. It is recommended that a retain (cup sample) of the slurry be taken after mixing and monitored at surface (above freezing temperature), to provide a more accurate indicator of the slurry set.

  • Section 2 Body: 

    For each 20 kg bag of Earth Pro Warm Plug Cement being mixed, measure 10 liters of fresh water into the mixing vessel. Begin stirring the water in a moderate fashion, and start adding the Earth Pro Warm Plug Cement. Once all the sacks are cut and added to the slurry, continue mixing for at least another 5-10 minutes to ensure proper dispersion and all lumps are removed. At this point the mix can be transferred to the dump bail.

    As product is mixed with water, some heat evolution will occur. Caution should be exercised to mix continually until ready to place the slurry in the dump-bail. Since Earth Pro Warm Plug Cement is caustic in nature (pH 10.0-12.0), it will cause severe burns to eyes sensitive skin areas. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 2 Body: 

    Aluminum Powder 200 is of low toxicity. Excess dust may however produce irritation of the eyes and respiratory system. Use good industrial
    hygiene practice and wear goggles and a dust mask when handling the material.

    Store in a cool, dry, well-ventilated area away from sources of heat, ignition, sparks and incompatible materials such as oxidizers, halogenated hydrocarbons, some acids and alkalis. Keep material dry as aluminum powder will react with water and slowly generate heat and hydrogen.

  • Section 2 Body: 

    Barite can be mixed through the mud hopper as rapidly as needed. When large quantities are added to a mud system it may be necessary to add water to prevent mud dehydration. Additional water is required when blending Barite slurries (Barite Water Requirement = 0.04 L H2O/kg Barite).

  • Section 2 Body: 

    Appearance: White crystals

    Density: 1.44 g/cc

  • Section 2 Body: 

    Calcium can be dry blended or prehydrated in water. The mixing of calcium chloride and water generates considerable heat.

  • Section 2 Body: 

    Appearance: Pale brown liquid

    Bulk Density: 0.80 - 0.81 kg/L @ 15°C

    Volatile Content: 95-96%

  • Section 2 Body: 

    CRM-22B can be dry blended or prehydrated as required. Avoid breathing dust. Wear the appropriate protective equipment when handling this product.

  • Section 2 Body: 

    Daxad 19 can be dry blended or dispersed in water. Care should be taken to avoid breathing dust.

  • Section 2 Body: 

    Appearance: Off white powder

    Bulk Density: 380-440 kg/m³

    Composition: Blend

    Specific Gravity: 1.35

  • Section 2 Body: 

    Appearance: Reddish brown powder

    Bulk Density: 500-700 kg/m³

  • Section 2 Body: 

    Appearance: Odorless white powder

    Specific Gravity: <1.2

    Viscosity: 4000 cps +/-500

    Particle Size: <150 microns

  • Section 2 Body: 

    Viscosity: 2100-2400 cP (Brookfield LVT 30 RPM, spindle 63)

    Microtox: 142.6 L/m³

  • Section 2 Body: 

    Appearance: White powder

    Set Time: 30-40 mins

    Dry Compressive Strength: 1500-2000 psi

    Particle Size: Grind through 325 mesh 75%

    Water Requirement: 425 L/ton

    Setting Expansion @ 70 consistency*: 17-19%

    *Consistency: weight of water in grams per 100 grams Industrial Moulding Plaster

  • Section 2 Body: 

    Appearance: Brown powder

    Bulk Density: 320-500 kg/m³

    Moisture Content: <7%

  • Section 2 Body: 

    Metso 66 mixes easily into cold water with moderate agitation. Avoid excessively humid conditions. Store in a cool, dry place. Metso 66 is corrosive. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 2 Body: 

    Metso Beads 2048 can be added directly through the admix bottle or pre-dissolved in the cement mix water tank prior to use. If pre-hydrating in water, calcium chloride must added first to ensure gel formation. Metso Beads 2048 exhibit a natural tendency to absorb humidity from the air. When stored in humid air for prolonged periods, these products may become sticky and cake into solid masses. Store product in a dry place and ensure packaging is tightly sealed.

  • Section 2 Body: 

    Appearance: Fine light grey powder

    Density: 2.7 g/cc

    Bulk Density: 0.65-0.81 g/cc (untamped, tamped)

  • Section 2 Body: 

    Appearance: Light grey

    Specific Gravity: 0.6-0.8

    Bulk Density: 320-400 kg/m³

    Particle Size: 10-300 microns

    Average Wall Thickness: 10% diameter

    Crush Strength: 3500-5000 psi

    Softening Point: >2700°F

  • Section 2 Body: 

    Appearance: White powder

    Specific Gravity: 2.7

    Bulk Density: 1365 kg/m³

    Particle Size Distribution: 87% passing 325 mesh

  • Section 2 Body: 

    Appearance: Slightly grey granules

  • Section 2 Body: 

    Plug Sand is not hazardous. Avoid excessively humid conditions. Store in a cool dry place. Plug Sand contains free silica. Avoid breathing dust, and wear appropriate dust mask as a precaution. Wear the approved safety goggles and protective equipment when handling this product.

  • Section 2 Body: 

    Appearance: White pellet

    Bulk Density: 1122 kg/m³

    Specific Gravity: 1.94 gm/cm³

    Particle Size Distribution:

    Mesh Size #30 #40 #50 #70 #100 #150 Pan
    Microns 600 425 300 212 150 106 <100
    % Retained 1 14 25 30 15 9 6
  • Section 2 Body: 

    Appearance: White crystals

    Bulk Density: 1200-1300 kg/m³

    Particle Distribution:

    Salt Grade Average Particle Size   % Retained on Various Tyler Mesh Sizes
    Fine 0.37 mm (40 mesh) Tyler Mesh Size 20 28 35 48 65 100 Pan
    % Retained 0 5.4 26.8 44.9 19.1 3.1 0.6
    #8 Coarse 1.7 mm (10 mesh) Tyler Mesh Size 8 10 14 20 28   Pan
    % Retained 0.9 45.5 35.5 13.3 2.4   2.6


  • Section 2 Body: 

    Appearance: Light grey powder

    Specific Gravity: 2.1 - 2.4

    Bulk Density: 608 - 720 g/cm³

    Particle Size: 0.4 microns

  • Section 2 Body: 

    Appearance: Light grey powder

    Specific Gravity: 2.1

    Bulk Density: 250 kg/m³

    Particle Size: 0.2 - 0.9 microns

    Specific Surface Area: 20 - 23 m³/g

  • Section 2 Body: 

    Appearance: White granular crystals

    Specific Gravity: 2.533 gm/cm³

    Bulk Density: 930 kg/m³ (min)

  • Section 2 Body: 

    Appearance: White powder

    Specific Gravity: 1.8 g/mL

    Bulk Density: 1.794 m³/ton

  • Section 2 Body: 

    Appearance: White crystals

    Specific Gravity: 2.7 gm/cm³

    Bulk Density: 1285-1445 kg/m³

    Melting Point: 884°C

    Particle Size Distribution: 

    Mesh Size #20 #35 #60 #100 #200 #400 Pan
    Microns 850 500 250 150 75 38 0
    % Retained 0 12.2 30.9 28.7 18.7 5.5 4.0
  • Section 2 Body: 

    Appearance: Clear brown liquid

    Specific Gravity: 0.97

    Pour Point: > -40°C

    Flash Point: 27.5°C (setaflash closed cup)

  • Section 2 Body: 

    Appearance: Colorless liquid

    Specific Gravity: 1.16

    Flash Point: >93°C (closed cup)

    Pour Point: -30°C

  • Section 2 Body: 

    Appearance: Colorless liquid

    Specific Gravity: 1.16

    Flash Point: >93°C

    Pour Point: -20°C

  • Section 2 Body: 

    Appearance: Colorless liquid

    Specific Gravity: 1.23

    Flash Point: >93°C

    Pour Point: -30°C

  • Section 2 Body: 

    May be used for all types of freshwater drilling but yield may vary depending on quality of water. High salinity or low pH will adversely affect yield. Ideal pH range for hydration is 8-10 and total hardness should be less than 80 mg/L (Calcium + Magnesium).

    • 40 kg/m³ regular drilling applications
    • 60-80 kg/m³ Lost circulation applications for suspension of LCM solids
    • 15-20 kg/m³ As filter cake enhancer in polymer systems

    Pre-hydrate in fresh water before adding to salt or brackish fluid. Expect yield to be diminished.

  • Section 2 Body: 

    Appearance: Brown to grey powder

    Specific Gravity: 4.2 - 4.4

    Melting Point: 1580°C

  • Section 2 Body: 

    Cal Carb 325 may be added directly at the suction with agitation or through the mud hopper. To avoid settling out in the surface tanks the fluid viscosity should be raised sufficiently to provide adequate suspension. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 2 Body: 

    May be used for all types of freshwater drilling but yield may vary depending on quality of water. High salinity or low pH will adversely affect yield. Ideal pH range for hydration is 8-10 and total hardness should be less than 80 mg/L (Calcium + Magnesium)

    • 40 kg/m³ regular drilling applications
    • 60-80 kg/m³ lost circulation applications for suspension of LCM solids
    • 15-20 kg/m³ as filter cake enhancer in polymer systems

    Earth Pro X-TRA Gel should not be mixed directly into salt water. Pre-hydrate in fresh water before adding to salt or brackish fluid. Expect yield to be diminished.

  • Section 2 Body: 

    Mixing ratios are based on the use of fresh water. Water purity will affect bentonite performance. For best results, acidic and hard make up water should be pre-treated with Soda Ash to a pH of 8.5 - 9.0.

    Premium Gel mixing ratio in lbs. per 100 gallons of water:

    • Normal conditions: 30 to 50 lbs.
    • Sand and gravel: 50 to 70 lbs.
    • Lost circulation control: 70 to 80 lbs.

    For best results, add Premium Gel slowly through a jet/hopper mixer.

  • Section 2 Body: 
    Typical E.P. Toxicity Analysis
      Standard ppm Set Grout ppm
    Arsenic 5.0 <0.10
    Barium 100.0 0.50
    Cadmium 1.0 <0.05
    Chromium 5.0 <0.10
    Lead 5.0 <0.10
    Mercury 0.2 <0.02
    Selenium 1.0 <0.05
    Silver 5.0 <0.10

     

      17.7% Solids 20.0% Solids
    Grout-Well DF 50lbs 50lbs
    Water 28 gal 24 gal
    Usable Slurry 31 gal 27 gal
  • Section 2 Body: 

    Weight of PureGold Chips (in lbs.) required for plugging a borehole with a depth of 1 foot and diameter as noted...

      2" 3" 4" 5" 6" 7" 8" 9" 10" 11" 15"
    Coarse 1.55 3.5 6.2 9.7 13.9 19.0 24.8 31.3 38.7 55.7 87.1
    Medium 1.6 3.6 6.45 10.1 15.4 19.8 25.8 32.7 40.4 58.1 90.8
  • Section 2 Body: 

    Appearance: Semi-solid tan paste

    Specific Gravity: 1.1  

    Melting Point: >205°C 

    Boiling Point: >260°C

  • Section 2 Body: 

    Appearance: Brownish yellow 

    Penetration: ASTM 

    Worked at 25°C: 212 

    Dropping Point: 252°C (485°F) 

    Pour Point: -27°C (-15°F)

  • Section 2 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail / 3.8L pail

  • Section 2 Body: 

    Appearance: Black/Brown 

    Dropping Point (ASTM D-566): 91°C (195°F) 

    Specific Gravity: 1.05 

    Density: 1.05 

    Flash Point (ASTM D-92): >221°C (430°F)

  • Section 2 Body: 

    Avoid contact with strong oxidizers. Safety glasses with side-shields are recommended. Wear clothing adequate to protect against exposure. Ensure eye-wash station and emergency shower are available. Wash thoroughly after handling. Avoid contact with eyes, skin or clothing.

  • Section 2 Body: 

    The combination of fresh water, Therm-Ex Grout and silica sand constitute the system for back filling geothermal loops. Use locally available dry silica sand. For best results, use sand ranging in size from 30 mesh to 70 mesh (AFS GFN particle size classification 38 to 50). 

    Mix as follows:

      .93 Btu/hr-ft-OF 1.05 Btu/hr-ft-OF 1.13 Btu/hr-ft-OF 1.2 Btu/hr-ft-OF
    Water 17 gal 20 gal 21 gal 22 gal
    Therm-Ex Grout 1-50lb bag 1-50lb bag 1-50lb bag 1-50lb bag
    Silica Sand 200lb 300lb 350lb 400lb

    Add the Therm-Ex Grout to the water while agitating. Mix for approximately one minute, then add the sand. Agitate until the sand is uniformly dispersed and pump into place using a tremie line.

    For best results, place the tremie line near the bottom of the loop and pump into place. Providing local regulations allow, slowly extracting the tremie line as you come up the hole reduces pump pressure, aids the grout in setting quicker, and reduces the opportunity for formation
    damage.

  • Section 2 Body: 

    Tru-Bore is dry bentonite clay and requires high shear and agitation for proper hydration. It should be mixed no faster than five minutes per sack. Always mix bentonite before polymers. Cold water increases mixing time.

    Tru-Bore concentrations vary dependent on the application and type of additives used. A concentration of 15-25 pounds of Tru-Bore per 100 gal of fluid yields a viscosity of approximately 45 seconds on a Marsh Funnel. At a rate of 27 lb per 100 gal, viscosity can climb to 60 seconds.

  • Section 2 Body: 

    Earth Pro BioFoam concentration should be 2-6L per 400L water for regular foam and gel foam applications. For dust suppressant, 0.25-0.5L per 400L and for mist drilling, 1-2L per 400L water.

  • Section 2 Body: 

    .25-1 L/m³ is more than sufficient. Too much will result in an increase in apparent viscosity as it will begin to flocculate the mud.

  • Section 2 Body: 

    When used alone for coring in competent rock the concentration of Earth Pro CombiVis L should be 2L/m³. In loose or fractured rock or for optimal reduction in torque increase additions to 2-4L/m³.

  • Section 2 Body: 

    When mixed in a polymer system in conjunction with Earth Pro HydraVis D, Earth Pro HydraVis L, Earth Pro SynVis D or Earth Pro SynVis L mix at 2-4kg/m³. As a rheology and fluid loss additive in bentonite based systems add 1-4kg/m³ as required to maintain fluid loss below 10CC.

  • Section 2 Body: 

    Earth Pro HydraVis D is a dry powdered product so it should be mixed very slowly and at a point of agitation or through a hopper to prevent fish eyes and clumping. Do not mix Earth Pro HydraVis D any faster than 5 mins/kg.

    Earth Pro HydraVis D mixing ratio in lbs. per 500L of water:

    • Normal conditions 2-3 kg
    • Sand and gravel 3-4 kg
  • Section 2 Body: 

    If Earth Pro HydraVis L is used in conjunction with Earth Pro SynVis L the concentration should be 2L/m³. If used as a stand alone product the concentration should be 3-4L/m³. If used as a bentonite extender the concentration should be 1.5L/m³.

  • Section 2 Body: 

    Earth Pro Mud Terminator 50lbs bags will solidify approx. 1000-1200 gallons of used drilling slurry.

  • Section 2 Body: 

    Fill available tanks with fresh water and apply maximum agitation to allow for quicker dispersion and hydration of initial application. Slowly add 1kg Earth Pro MultiMix to 1000L of water and allow to hydrate at maximum shear in the tank for 5 mins.

    While pumping mixture down, add an additional 2 kg/m³ as close to the suction point as possible to allow for semi hydrated polymers to reach formation. As the semi hydrated polymers are hydrated in or on the surface of the formation, they will form a securing polymer matrix that will halt further sloughing and collapse.

    Regular drilling applications in potential sloughing sand and loose overburden should be met with 2 kg/1000 L of water of Earth Pro MultiMix mixed and hydrated in the surface tanks like normal drilling polymers. Regular semi hydrated sweeps of Earth Pro MultiMix may also benefit broken ground conditions. Sweep by adding .5 kg of drill Earth Pro MultiMix at a point close to the suction in the mud tanks while pumping.

  • Section 2 Body: 

    For optimum performance, Earth Pro RockBond should be added to a system before the troublesome zone is penetrated or as soon after as possible.

    Premix the prescribed amount in the surface system by adding it at a point of agitation near a mixer in the tank.

    For enhancing filter cake in troublesome shale and sands use a concentration of 9.0 to 17.0 kg/m³. For shock treatment of a zone that has already been penetrated mix 20-30 kg/m³ in the initial 2-3 m³ of fluid then maintain the concentration at 5-10 kg/m³ until the zone has been completely drilled and 1hr afterwards.

  • Section 2 Body: 

    Mix the Earth Pro StopLoss directly in the tank with 200 times its volume water. Wait 10 minutes. Inject the mixture into the drill string. Inject a volume of water to move mixture to the correct location. Wait 20 minutes. Drill. If the problem persists attempt treatment a second time.

    or

    Place 1 gallon of dry Earth Pro StopLoss in a 2 0-liter pail with 10 liters of water. Allow Earth Pro StopLoss to partially swell. Add 1 liter of partially swollen Earth Pro StopLoss to the rods after the core tube has been pulled. Pump down hole and replace inner tube. Repeat as necessary to stop loss.

  • Section 2 Body: 

    When used within Mineral Exploration, hydration is almost immediate. 1-1.5 kg/m³ is generally sufficient for normal vertical drilling applications.

    In unconsolidated or broken formations that are prone to sloughing or in water reactive clay / shale the concentration should be increased to 1.5-2.5 kg/m³. This product is sensitive to high salinity, if mixing in salt water - contact Di-Corp for specialized instruction.

    When used within Horizontal Directional Drilling, 0.5-1 kg/m³ can be used as an additive to Tru-Bore based fluid to enhance viscosity properties and proved shale and clay encapsulation.

  • Section 2 Body: 

    Earth Pro SynVis L can be added either by either batch measuring the prescribed amount and adding at a point of agitation or continuous additions by poking a small hole in the bottom and top of the pail and placing near a point of agitation above the tank.

    If being mixed as part of a complete polymer system add approximately 2 L for every m³ of fluid under normal drilling situations. If being mixed as a standalone product increase the mixture to 3.5-4 L/m³ and vary concentration depending on hole conditions. If being added as an overburden binder or to a bentonite system as an extender add 3 L/m³ after the bentonite has been added to the mix and allowed to hydrate.

  • Section 2 Body: 

    Thoroughly mix 1 to 3 liters of Earth Pro TurboCut into 100 liters of fresh water or drilling fluid, depending on drilling conditions. Earth Pro TurboCut can be added to polymer and bentonite drilling systems.

  • Section 2 Body: 

    DR-133 Polymer can be added either by either batch measuring the prescribed amount and adding at a point of agitation or continuous additions by poking a small hole in the bottom and top of the jug and placing near a point of agitation above the tank.

    If being mixed as part of a complete polymer system add approximately 2L for every m³ of fluid under normal drilling situations. If being mixed as a standalone product increase the mixture to 3.5-4 L/m³ and vary concentration depending on hole conditions. If being added as an over burden binder or to a bentonite system as an extender add 3 L/m³ after the bentonite has been added to the mix and allowed to hydrate.

  • Section 2 Body: 

    Geo-Flo is a dry powdered product so it should be mixed very slowly and at a point of agitation or through a hopper to prevent fisheyes and clumping. Do not mix Geo-Flo any faster than 5 mins/kg.

    Geo-Flo mixing ratio in lbs. per 500L of water:

    • Normal conditions 2-3 kg
    • Sand and gravel 3-4 kg
  • Section 2 Body: 

    For optimum performance, Boreliner should be added to a system before the troublesome zone is penetrated or as soon after as possible. Premix the prescribed amount or Boreliner in the surface system by adding it at a point of agitation near a mixer in the tank.

    For enhancing filter cake in troublesome shale and sands use a concentration of 9.0 to 17.0 kg/m³. For shock treatment of a zone that has already been penetrated mix 20-30 kg/m³ in the initial 2-3 m³ of fluid then maintain the concentration at 5-10 kg/m³ until the zone has been completely drilled and 1 hour afterwards.

    Boreliner is a hydrocarbon based product which is not considered biodegradable. The dust from the product warrants the use of a dust mask when mixing and handling to prevent inhalation. At low concentrations the product is non toxic to the environment.

  • Section 2 Body: 

    WDS 120L can be added either by either batch measuring the prescribed amount and adding at a point of agitation or continuous additions by poking a small hole in the bottom and top of the jug and placing near a point of agitation above the tank.

    If being mixed as part of a complete polymer system add approximately 2 L for every m³ of fluid under normal drilling situations. If being mixed as a standalone product increase the mixture to 3.5-4 L/m³ and vary concentration depending on hole conditions. If being added as an over burden binder or to a bentonite system as an extender add 3 L/m³ after the bentonite has been added to the mix and allowed to hydrate.

  • Section 2 Body: 

    Mix the G-Stop directly in the tank with 200 times its volume water. Wait 10 minutes. Inject the mixture into the drill string. Inject a volume of water to move mixture to the correct location. Wait 20 minutes. Drill. If the problem persists attempt treatment a second time.

    or

    Place 1 gallon of dry G-Stop in a 20-liter pail with 10 liters of water. Allow G-Stop to partially swell. Add 1 liter of partially swollen G-Stop to the rods after the core tube has been pulled. Pump down hole and replace inner tube. Repeat as necessary to stop loss.

  • Section 2 Body: 

    Appearance: Milky, viscous liquid

    Specific Gravity: 1.05

    Melting Point: -14°C

    Flash Point: >93°C

  • Section 2 Body: 

    Concentration for initial treatments should be 3-4L/m³ and then maintenance should be at 2-3L/m³ (this should be monitored closely). Situations may require concentrations up to 10L/m³ or as low as 2L/m³.

  • Section 2 Body: 
    • Recommended concentration when mixed with DR-133 – 2 Liters/1000 L water
    • Recommended concentration when mixed alone with no other viscosifiers – 3-4 L/1000 L water
    • Recommended concentration to enhance bentonite system properties – 1.5 L/1000 L Mud
  • Section 2 Body: 

    Ultra-Vis II should be shaken before opening and using to homogenize the mixture and eliminate any natural settling.

    Add Ultra-Vis II at a point of agitation in the mud tank by either measuring the prescribed dosage and pouring it in slowly or by poking a small hole in the top and bottom of the jug and placing it over the tank to dose continuously. Recommended concentration depends on the ground conditions.

    For normal coring conditions in competent rock 2 L/m³ will provide sufficient viscosity. In loose or fractured rock or if being used to reduce torque and drag double the addition of Ultra-Vis II to 4 L/m³.

  • Section 2 Body: 

    Appearance: Yellow and white granules

    Specific Gravity: 2.6

  • Section 2 Body: 

    Mix LubTub after mixing regular drilling additives such as viscosifying polymers. Add in batches at the suction side of the mud tank to create a sweep effect in the wellbore. LubTub will thin back most drilling fluids and is most effective when mixed and pumped in only water or in polymer systems.

    Effectiveness will be reduced in Bentonite slurries. When mixing in whole mud do so after the polymer has hydrated. Under normal drilling conditions if a sticky clay seam is encountered add 2-3 L/m³ of fluid. If a mud ring is suspected add 2 visc cups of LubTub directly into the tool joint when making a connection.

    In a recycled closed loop system if used as a thinner add sparingly at the front end of the system and check viscosity in the suction end regularly so as to not over treat. This is a very strong product and will thin fluids rapidly and to a great degree. .25-1 L/m³ is more than sufficient. Too much will result in an increase in apparent viscosity as it will begin to flocculate the mud.

  • Section 2 Body: 

    Appearance: White granular powder

  • Section 2 Body: 

    Appearance: Free-flowing white powder

  • Section 2 Body: 

    Dropping Point (ASTM D-2265): >230°C (450°F)

    Specific Gravity: 1.30

    Density: 1.30

    Flash Point (ASTM D-217): 300 -330

  • Section 2 Body: 

    Appearance: Water clear to pale yellow

    Flash Point: 23°C

    Boiling Point: 85°C

    Freezing Point: -40°C

  • Section 2 Body: 

    Modified Starch is more efficient than regular starches and nearly as efficient as PAC at controlling fluid loss. It has a synergistic effect with bentonite and other polymers which enhances the shear thinning properties of drilling fluids and results in excellent hole cleaning at low shear rates. Modified Starch can also coat clay and shale particles to control clay dispersion, slow well bore destabilization, and facilitate the removal of drilled solids on surface.

    Modified Starch can be combined with PAC as a low cost extender. Blends typically contain 1:1 – 3:1 Modified Starch/PAC. Modified Starch is effective in all types of water-based fluids and at temperature up to 150°C with the use of an oxygen scavenger. It is non-fermenting and requires no biocide under normal conditions. Filter cakes containing Modified Starch can be easily removed using Can-Break ECA.

    Modified Starch is used in concentrations ranging from 4.0-12.0 kg/m³, depending on fluid loss requirements and the amount of solids in the system.

  • Section 2 Body: 

    Hyperdrill AE 853 exhibits a low order of toxicity. However, precautions should be taken to avoid inhalation, ingestion or contact with skin or eyes. For additional information, see the relevant MSDS.

    SPILLS: Polymer spills are extremely slippery and therefore hazardous. They should be addressed immediately. An absorbent material should be applied to the spill, then swept up and disposed of according to local, state or federal regulations. The area should then be washed down with a bleach solution. Do not add water to a spill.

  • Section 2 Body: 

    Appearance: Milk-white liquid

    Specific Gravity: 1.04 - 1.06

    Pour Point: -10°C

    Flash Point: >93°C

  • Section 2 Body: 

    Appearance: Yellow-brown pellet

    Boiling Point: 320°F (160°C)

    Specific Gravity: 2.1 @ 68°F (20°C)

    Melting Point: 268°F (131°C)

  • Section 2 Body: 

    Appearance: Grayish white crystalline powder

    Boiling Point: 320°F (160°C)

    Specific Gravity: 2.1 @ 68°F (20°C)

    Melting Point: 268°F (131°C)

  • Section 2 Body: 

    Appearance: Colorless to lightly colored liquid

    Boiling Point: 275°F

    Specific Gravity: 1.5850 @ 60°F

    Melting Point: -17.5°C (75% H3PO4)

  • Section 2 Body: 

    Appearance: Clear amber liquid

    Boiling Point: 243°F

    Specific Gravity: 1.27

  • Section 2 Body: 

    Appearance: Clear yellow liquid

    Boiling Point: 250°F

    Specific Gravity: 1.19

  • Section 2 Body: 

    Appearance: Clear, light amber liquid

    Boiling Point: 235°F

    Specific Gravity: 1.12

  • Section 2 Body: 

    Appearance: Coarse white to off white crystal

    Melting Point: 48°C (118°F) Loses water @ 100°C (212°F)

    Specific Gravity: 1.67 @ 68°F

  • Section 2 Body: 

    Appearance: Silver

    Dropping Point: 260°C

    Specific Gravity: 1.10

    Density: 1.10

    Dropping Point: 260°C

  • Section 2 Body: 

    Appearance: Smooth grey paste

    Dropping Point: 91°C (195°F)

    Specific Gravity/Density: 1.59

    Flash Point: >221°C (430°F)

  • Section 2 Body: 

    Appearance: White granular crystal

    Bulk Density: 930 kg/m³ (min)

    Specific Gravity: 2.533 gm/cm³

    Particle Size Distribution:

    Mesh Size #20 #30 #40 #100 #140 #200 Pan
    Microns 850 600 425 150 106 75 <75
    % Retained 0.5 max 3.0 max 30.0 max 85.0 min 93.0 min 98.0 min 2.0 max
  • Section 2 Body: 

    Appearance: Colorless and odorless grains

    Specific Gravity: 1.665

    Molecular Weight: 192.14

    Molecular Formula: HOC(CH2CO 2H) 2CO2H

    Melting Point: 153°C

  • Section 2 Body: 

    Appearance: Colorless liquid

    Specific Gravity: 1.1

    Crystallization Point: -18°C

  • Section 2 Body: 

    Appearance: Opaque liquid

    Specific Gravity: 1.05

    Pour Point: -30°C

    Flash Point: >100°C (TCC)

  • Section 2 Body: 

    Appearance: Opaque liquid

    Specific Gravity: 1.05

    Pour Point: -30°C

    Flash Point: >100°C (TCC)

  • Section 2 Body: 

    Appearance: Opaque liquid

    Specific Gravity: 1.05

    Pour Point: -30°C

    Flash Point: >100°C (TCC)

  • Section 2 Body: 

    Appearance: Opaque liquid

    Specific Gravity: 1.05

    Pour Point: -30°C

    Flash Point: >100°C (TCC)

  • Section 2 Body: 
    Product Number Product Name
    27015 Repair Kit 5.5” x 8”
    27021 Piston Repair Kit 5” x 6”
    42182 Piston Repair Kit 5.5” x 8” PPFD TBB76013
    42183 Piston Repair Kit 5” x 6” PPGD TBA76002

     

  • Section 2 Body: 
    Product Number Size Product Description
    46079 4” x 1” Pitless Adapter
    46080 4” x 1.25” Lead Free Pitless Adapter
    46081 5” x 1” Lead Free Pitless Adapter
    50261 5” x 1.25” Lead Free Pitless Adapter
    46270 6” x 1.25” Pitless Adapter
  • Section 2 Body: 
    Product Number Size Product Name
    48894 4-1/2” x 2’ Figure K 5 TPI
    49543 4-1/2” x 2’ Figure K Double 5 TPI for 6-5/8” Steel Casing
  • Section 2 Body: 
    Product Number Product Name Packaging
    47366 Silica Sand 6/9 50lb
    31203 Silica Sand 8/12 50lb
    47389 Silica Sand 10/16 50lb
    31204 Silica Sand 10/20 50lb
    49012 Silica Sand 12/20 50lb
    44439 Silica Sand 16/30 50lb
    27071 Silica Sand 20/40 50lb
    48814 Silica Sand 30/70 50lb
  • Section 2 Body: 
    Product Number Product Name Packaging
    99900448 Sand 6/9 50lb
    99900432 Frac Sand 10/20 Tote
    99900433 Frac Sand 6/9 Tote
  • Section 2 Body: 
    Product Number Description
    48897 4.94" X 20' X .248" 5 TPI .020" 
    49001 4.94" X 20' X .291" 5 TPI .020" 
    48845 4" X 20' X SDR 21 5 TPI .020" 
    41124 4" X 20' X SDR 21 8 TPI .020" 
    49571 6" X 10' X .390" 5 TPI LH .020" 
    49173 6" X 20' X .390" 5 TPI LH .020" 
    48945 6" X 20' X .390" 5 TPI RH .020" 
    49572 6" X 5' X .390" 5 TPI LH .020" 
  • Section 2 Body: 
    Product Number Size Wall Thickness Description
    41160 4-1/2" x 5' .188" Casing Protector
    41169 5-9/16" x 5' .188" Casing Protector
    49680 6-5/8" x 2.5' .188" Casing Protector
    41165 6-5/8" x 5' .188" Casing Protector
    49457 8-5/8" x 5' .188" Casing Protector
  • Section 2 Body: 
    Product Number Size Style
    46014 5" x 4-2/25" ID x 4" Long Weld On
    41871 5-9/16" x 5-1/4" ID x 4" Long Weld On
    41874 5-9/16" x 5-1/4" ID x 4" Long Threaded
    41884 6-5/8" x 6-1/8" ID x 4" Long Threaded
    41883 6-5/8" x 6-1/8" ID x 4" Long Weld On
    41921 6-5/8" x 6-1/8" ID x 4-1/2" Long Threaded
    41906 6-5/8" x 6-1/8" ID x 5-3/8" Long Weld On
    41885 6-5/8" x 6-1/8" ID x 5-3/8" Long Threaded
    41897 6-5/8" x 6-1/8" ID x 5-3/4" Long Threaded
    41915 6-5/8" x 6-1/4" ID x 3-1/2" Long Weld On
    43478 6-5/8" x 6-1/4" ID x 5-1/2" Long Weld On
    43478L 6-5/8" x 6-1/4" ID x 5-1/2" Long - Long Taper Weld On
    43435 6-5/8" x 6-1/4" ID x 5-3/8" Long Weld On
    41917 6-5/8" x 6-1/4" ID x 5-3/8" Long Threaded
    41929 8-5/8" x 8-1/8" ID x 7-3/4" Long Weld On
  • Section 2 Body: 
    Product Number Size SDR
    47051 1-1/4" X 560' 11.0
    47455 1-1/4" X 575' 11.0
    49461 1-1/4" X 580' 11.0
    47060 1-1/4" X 595' 11.0
    47059 1-1/4" X 610' 11.0
  • Section 2 Body: 
    Product Number Product Description
    48909 QC Slope Indicator Anchor for 85 mm (3.34”) Casing
    49019 QC Slope Indicator Anchor for 70 mm (2.75”) Casing
  • Section 2 Body: 
    Product Number Size Product Description
    30448 2” AW Shelby Head Assembly with 4 Cap Screws #022033-3
    30599 2” AWJ Shelby Head Assembly with 4 Cap Screws #022033-53
    30468 3” NWJ Shelby Head Assembly with 4 Cap Screws #022033-59
    35342 3” AWJ Shelby Head Assembly with 4 Cap Screws #022033-52
    49310 3” AW Shelby Head Assembly with Coupler AW & AWJ
  • Section 2 Body: 
    Product Number Size TPI Description
    41080 2” x 5’ 2 .010” Slotted
    41088 2” x 5’ 2  
    41094 2” x 5’ 2 .010” Slotted
    41095 2” x 5’ 2 .020” Slotted
    41186 2” x 5’ 4  
    41188 2” x 5’ 4 .010” Slotted
    41190 2” x 5’ 4 .020” Slotted
    47230 2” x 5’ 2 .020” Slotted
    41096 2” x 10’ 2 .010” Slotted
    41097 2” x 10’ 2 .020” Slotted
    41185 2” x 10’ 4  
    41187 2” x 10’ 4 .010” Slotted
    41189 2” x 10’ 4 .020” Slotted
    49488 2” x 10’ 2 .030” Slotted
  • Section 2 Body: 
    Product Number Description
    46883 2-1/2" X 6" X 11" PVC Centralizer with Clamp
    47412 2" X 4-1/2" PVC Centralizer with Clamp
  • Section 2 Body: 

    Product Number

    Size

    Description

    WS5X1

    5” x 1”

     

    WS6X1

    6” x 1”

     

    38487

    4” x 1.25” x 1”

     

    38489

    6” x 1.25” x 1.25”

     

    38491

    6” x 1.25” x 1”

     

    38495

    6.25” x 1.25” x 1”

     

    38497

    6.625” x 1.25” x 1”

     

    38958

    8” x 1.25” x 1”

     

    42603

    4” x 1”

    Single Hole

    42604

    5” x 1”

    Single Hole

    42605

    5” x 1.25”

    Single Hole

    42606

    5.25” x 1”

     

    42607

    6.25” x 1”

    Single Hole

    42608

    6.25” x 1.25”

    Single Hole

    42614

    6” x 1.25” x 1”

    Double Hole

    42615

    6.25” x 1.25” x 1”

    Double Hole

    43428

    6.25” x 2”

    Single Hole

    44356

    4” x 1.25” x 1”

     

    43776

    6” x 1”

     

    44089

    4.25” x 1”

     

    44578

    4” x 1.25”

     

    46142

    5” x 1.25” x 1”

     

    46313

    5” x 2”

     

    46359

    6.25” x 1.5”

    Single Hole

    46699

    4” x 1.25” x 1”

     

    46700

    6.25” x 1.25” x 1.25”

    Double Hole

    46755

    6” x 2”

     

    48974

    6” x 3”

     

    49186

    6” x 1.25”

     

  • Section 2 Body: 
    Dimensions 15" length, 20" height, 7" width (38 cm L x 51 cm H x 18 cm W)
    Weight 38 lbs (17.25 kg)
    Powered by 3/4 hp (6 amps) volt DC electric motor
    Performance Characteristics Generates a 4" stroke, adjustable 0-180 cycles/min
    Additional Requirements 110 VAC or 220 VAC power supply
    For Use With Inertial Pumping Systems — Standard FlowHigh FlowLow Flow
  • Section 2 Body: 
    Dimensions 24" length, 17" height
    Weight 8 lbs (3.6 kg)
    Powered by Manual operation
    Additional Requirements Above ground well completion
    For Use with Inertial Pumping Systems —Standard Flow, High Flow, Low Flow
  • Section 2 Body: 
    Dimensions 15.5" length, 22.5" height, 14.5" width 
    (39cm L x 57cm H x 37cm W)
    Weight 28.6 lbs (13kg)
    Power by Honda GX25 (25cc Mini 4-Stroke OHC gasoline engine)
    Performance Characteristics Generates a 4" stroke, 
    adjustable 0—140 cycles/min
    Additional Requirements Regular gasoline, SAE 10W-30 motor oil
    For Use With Inertial Pumping Systems —Standard Flow, High Flow, Low Flow
  • Section 2 Body: 
    Dimensions 29" length, 30" height, 12" width (74cm L x 76cm H x 30cm W)
    Weight 75 lbs (34 kg)
    Powered by Honda GX100 Air-cooled, 4-Stroke OHC gasoline engine
    Performance Characteristics Generates a 6" stroke, 
    adjustable 0—150 cycles/min
    Additional Requirements Regular gasoline, SAE 10W-30 motor oil
    For Use With Inertial Pumping Systems —Standard Flow & High Flow
  • Section 2 Body: 

    The Inertial Pump has a substantial capacity for developing monitoring wells because of the cyclical action of the valve in the well screen area. This characteristic can be utilized to remove silt and sediment that has accumulated in the foot of the monitoring well and can also be used to remove fines from the sand pack and well screen.

    The well development capacity of the High Flow D-32 foot valve can be enhanced by installing a SBD-32 Surge Block to the D-32 foot valve. The Surge Block is an excellent well development tool. It simply press fits over the body of the Standard Flow Foot Valve or High Flow Foot Valve (D-25 or D-32).

    The Surge Block effectively increases the outside diameter of the D-25 or D-32 foot valve to 1-7/8” In 2” wells and 3-7/8” OD in 4” wells, reducing the annular gap between the valve and the inside of the well screen to approximately 1/16”. This results in a significant increase in the surging action of the valve.

    The use of the Inertial Pump and Surge Block together is one of the most effective methods for developing monitoring wells because it simultaneously surges and pumps the well. This frees up silt and sediment in the sand pack and screen and breaks down bridging, drawing these particles it into the well and then removes this material from the well.

    The recommended method for developing a monitoring well with the Inertial Pump and Surge Block is to begin the development process with the Surge Block near the top of the well screen. Operate the pump with the Surge Block in this position until the turbidity level of the water being delivered from the pump decreases to an acceptable level. Once this level is reached then the Surge Block is lowered in the well screen one to two feet and the process is repeated. Developing wells in this manner is one of the best methods, often resulting in turbidity levels below 10 NTUs.

    The development capacity of the High Flow System is greater than that of the Standard Flow System because the pump generates a higher flow rate and the larger diameter tubing is stiffer and flexes less in 2” monitoring wells.

  • Section 2 Body: 

    The Low Flow System is also useful for sampling in damaged or obstructed monitoring wells as well as in small diameter monitoring wells with low head levels or poor recharge.

    The smaller diameter tubing used in the Low Flow System and lower flow rate produced by this system means that the pump itself contains a smaller volume of water when full, leaving more water in the piezometer available for pumping and ultimately sampling.

    A pump with a larger storage volume or higher flow rate could potentially purge the well dry or displace the all of the standing water in the well into the pumps tubing and still not have delivered any all of the way to the surface.

  • Section 2 Body: 

    The Micro Flow System is also useful for sampling in damaged or obstructed monitoring wells. The maximum outside diameter of the Micro Flow System is 3/8” (10mm). This small maximum diameter allows this pump to fit into many tight situations that outer devices can't get near.

  • Section 2 Body: 

    The inertial pump has a substantial capacity for developing monitoring wells because of the cyclical action of the valve in the well screen area. This characteristic can be utilized to remove silt and sediment that has accumulated in the foot of the monitoring well and can also be used to remove fines from the sand pack and well screen.

    The well development capacity of the Standard Flow D-25 foot valve can be enhanced by installing a SBD-25 Surge Block to the D-25 foot valve.

    A Surge Block is an excellent well development tool. It simply press fits over the body of the Standard Flow or High Flow foot valve (D-25 or D-32).

    The Surge Block effectively increases the outside diameter of the D-25 or D-32 foot valve to 1 7/8” In 2” wells and 3 7/8” OD in 4” wells, reducing the annular gap between the valve and the inside of the well screen to approximately 1/16” . This results in a significant increase in the surging action of the valve.

    The use of the Inertial Pump and Surge Block together is one of the most effective methods for developing monitoring wells because it simultaneously surges and pumps the well. This frees up silt and sediment in the sand pack and screen and breaks down bridging, drawing these particles it into the well and then removes this material from the well.

    The recommended method for developing a monitoring well with the inertial pump and Surge Block is to begin the development process with the Surge Block near the top of the well screen. Operate the pump with the Surge Block in this position until the turbidity level of the water being delivered from the pump decreases to an acceptable level. Once this level is reached then the Surge Block is lowered in the well screen one to two feet and the process is repeated. Developing wells in this manner is one of the best methods, often resulting in turbidity levels below 10 NTUs.

  • Section 2 Body: 
    • Standard Flow – SBD-25-4
    • High Flow – SBD-32-4
  • Section 2 Body: 
    Size Diameter Length Volume Quantity
    3" 3.3" 3' 5 L 8 bailers/case
    1.5" 1.5" 3' 1 L 24 bailers/case
    0.7" 0.7" 3' 230 ML 24 bailers/case
    0.5" 0.46" 3' 85 ML 24 bailers/case
  • Section 2 Body: 
    • No-purge device provides larger sample volume, a full 1 liter, in 2" and larger wells
    • Disposable
    • Fits in 2" Schedule 40 and larger wells (will not fit in 2" Schedule 80 PVC)
    • Standard material = virgin 4 mil PE. Tensile strength 15-25 lb
    • Absolute maximum volume obtainable without spilling 1.2 liters
    • Requires the use of 8 oz. Bottom Weight
    • Layflat = 2.75"W x 38"L
    • Filled Diameter = 1.75"
    • Filled Volume = ~1000 mL
    • Fill Stroke = 38"
  • Section 2 Body: 
    • 4-inch HydraSleeve made to hold greater than 2.5 liters of sample volume
    • 2.9 inches O.D. by 37 inches long.  Fill within a 7-foot column.  Lay-flat width 4.614 inches
    • Absolute maximum volume obtainable without spilling 3.1 liters
    • Layflat = 4.61"W x 37"L
    • Filled Diameter = 2.9"
    • Filled Volume = ~2500 mL
    • Fill Stroke = 37"
  • Section 2 Body: 
    • Two-piece 24-ounce top weight for use with the 1-liter and 2-liter HydraSleeve SS.
    • Top section is PVC and the bottom is stainless.
    • Thread together holding the SuperSleeve in place.
    • Reusable
    • Includes spring clip for attaching tether line. 
    • Should be used in conjunction with a small bottom weight when deploying the SuperSleeves.
    • Length: 7.8"
    • OD: 1.9" (fits in 2" Schedule 40 well & larger)

    Please leave a minimum of 3-5 feet slack in the tether line to allow the SuperSleeve to compress into the bottom of the well.  This depends on the length of your sampler:  3 feet for the 1-liter SuperSleeve; 5 feet for the 2-liter SuperSleeve.  A minimum of 48 hours should be allowed for equilibration time when using SuperSleeves.

  • Section 2 Body: 
    • Fits in 2" Schedule 40 and larger wells
    • Standard material = stainless steel
    • Can be used as a bottom weight for all 2-inch HydraSleeves and the standard 4-inch HydraSleeves.
    • Dimensions:  0.75" OD x 4" long
  • Section 2 Body: 

    The FHT-45 offers the user the most surface area available in capsule type filters today. The unique open pleat geometry and 600 square cm surface area provide the maximum media exposure while ensuring that even with the most turbid samples, you will not lose filtration media to blinding.

    The FHT-45 uses 600 square cm of high quality polyethersulphone 0.45 micron filter media, which offers excellent particle retention above the target micron size range. The high void volume of this media also helps prolong media life.

    The FHT-45 also offers the user greater flexibility over other products by providing a compound inlet. It has both a 3/8" threaded nipple and a 1/2" hose barb allowing the filter to be attached easily to a variety of pumps and tubing sizes.

    All Inline Disposable Micron Filters are pre-rinsed with one liter of de-ionized water to ensure purity, and are now certified to rinse clean. Independent ICP/MS analysis proves it.

  • Section 2 Body: 

    The heavy duty Kwik Klamp 2 is the driller's answer for holding the larger pipe sizes 2-1/2", 3", and 4". Kwik Klamp 2 is an enlarged version of our popular Kwik Klamp 1 which is for pipe sizes 1" through 2", with many of the same features. This tool has been used worldwide by environmental drillers, pump installers, well serviceman, and water well drillers.

    • Main body is constructed of 2" and 2-1/2" 1/4" wall steel tube.
    • Easy to operate, over center locking of jaws when downward pressure is applied to a 19" long lever handle.
    • 1/2" Safety pin used to prevent accidental unclamping.
    • Kwik Klamp 2 allows workers to bring pipe or drill joint up to an easy working level.
    • The tool weighs only 30 lbs. and is 20" long x 7-1/2" wide.
    • Jaws are equipped with 16 carbide tipped grippers.
    • Excellent holding capability, with load tests done over 7,000 lbs.
    • Designed to hold pipes 2-1/2", 3" and 4" (2.875"OD-4.5"OD) PVC, HDPE, stainless and galvanized steel.
    • Kwik Klamp is one of the safest, time saving tools you will ever own.
    Product Number Description
    41178 Kwik Klamp 2 for 2.5” to 4.5” Pipe
    47334 Kwik Klamp 2 Spacers for 4.5” Pipe
  • Section 2 Body: 
    1. A good casing pack job depends on preventing contamination of the casing pack fluid and getting it placed properly. To accomplish this, the following procedure is adopted.
    2. Casing is run into hole and seated by spinning to bottom
    3. Casing is pulled back 1” or 2” off bottom to establish full circulation
    4. A spacer of diesel fuel is introduced into the casing, followed by the casing pack mixture
    5. An appropriate displacement plug is introduced into the casing
    6. Water or mud is pumped into the casing and the plug is pumped to the bottom of the hole
    7. When the plug hits the bottom the pump pressure suddenly rises and signals that the pump should be stopped
    8. At this point the casing pack has been displaced in the annulus and if volume calculations have been correct, the diesel oil spacer and some diluted casing pack has been circulated out of the hole
    9. Casing is lowered back on the bottom and the Displacement Plug, which is sitting inside the bottom of the casing, is drilled out
  • Section 2 Body: 
    Product Number Description
    30157 AQ A187L-13”
    30159 BQ A238L-17”
    30160 NQ A300L-21”
    30161 HQ A387L-21”
    30162 NQ A300R-21”
    30163 PQ A483L-21”
  • Section 2 Body: 
    Product Number Size
    37074 .5” x 12”
    30164 .5” x 18”
    30165 .5” x 24”
    30166 .5” x 36”
    30167 .5” x 48”
    30168 .5” x 60”
    30169 .5” x 72”
    37075 .5” x 96”
    37076 .5” x 120”
    37077 1” x 12”
    30186 1” x 18”
    30187 1” x 24”
    30188 1” x 36”
    30189 1” x 48”
    30190 1” x 60”
    30191 1” x 72”
    30192 1” x 96”
    30185 1” x 120”
    39136 2” x 36”
    39142 2” x 48”
    39266 2” x 72”
    39370 2” x 60”
  • Section 2 Body: 

    Avoid eye and skin contact, should contact occur, flush thoroughly with water and seek proper medical attention. Wear plastic or latex gloves and chemical splash goggles. Do not wear contact lenses when handling this material. Wear chemical impervious clothing. Wash thoroughly after handling. Keep containers tightly closed at all times.

  • Section 2 Body: 
    Size and Thread Depth Capacity* Pullback** (rated minimum)
    ND 3 m (10 ft) 3000 m (10,000 ft) 333 kN (75,000 lbf)
    ND 1.5 m (5ft) 3000 m (10,000 ft) 333 kN (75,000 lbf)
    HD 3 m (10 ft) 2500 m (8200 ft) 523 kN (117,500 lbf)
    HD 1.5 m (5 ft) 2500 m (8200 ft) 523 kN (117,500 lbf)
    PD 3 m (10 ft) 1500 m (5000 ft) TBA kN (TBA lbf)
    PD 1.5 m (5 ft) 1500 m (5000 ft) TBA kN (TBA lbf)

    *Depth capacity ratings are based on published industry values. Di-Corp uses comparable materials and manufacturing processes, and is confident the same results will be achieved. It is important to note that the care and handling, in addition to drilling conditions, practices, and equipment will play a significant role in the ultimate depth capacity and performance of any drill rod.

    **Di-Corp is testing its rod offering at an independent facility and will publish values as they become available. Pullback is rated on a new, unused drill rod.

  • Section 2 Body: 
    Size and Thread Depth Capacity* Pullback** (rated minimum)
    BWL 3 m (10 ft) 1500 m (5000 ft) TBA kN (TBA lbf)
    BWL 1.5 m (5 ft) 1500 m (5000 ft) TBA kN (TBA lbf)
    NWL 3 m (10 ft) 2000 m (6500 ft) 222 kN (50,000 lbf)
    NWL 1.5 m (5 ft) 2000 m (6500 ft) 222 kN (50,000 lbf)
    HWL 3 m (10 ft) 1500 m (5000 ft) 333 kN (75,000 lbf)
    HWL 1.5 m (5 ft) 1500 m (5000 ft) 333 kN (75,000 lbf)

    *Depth capacity ratings are based on published industry values. Di-Corp uses comparable materials and manufacturing processes, and is confident the same results will be achieved. It is important to note that the care and handling, in addition to drilling conditions, practices, and equipment will play a significant role in the ultimate depth capacity and performance of any drill rod.

    **Di-Corp is testing its rod offering at an independent facility and will publish values as they become available. Pullback is rated on a new, unused drill rod.

  • Section 2 Body: 
    Size and Thread Depth Capacity* Pullback** (rated minimum)
    ND 3 m (10 ft) 3360 m (11,000 ft) 333 kN (75,000 lbf)
    HD 3 m (10 ft) 3050 m (10,000 ft) 523 kN (117,500 lbf)
    PD 3 m (10 ft) 3000 m (10,000 ft) TBA kN (TBA lbf)
    NWL 3 m (10 ft) 3000 m (10,000 ft) 222 kN (50,000 lbf)
    HWL 3 m (10 ft) 1830 m (6000 ft) 333 kN (75,000 lbf)

    *Depth capacity ratings are based on published industry values. Di-Corp uses comparable materials and manufacturing processes, and is confident the same results will be achieved. It is important to note that the care and handling, in addition to drilling conditions, practices, and equipment will play a significant role in the ultimate depth capacity and performance of any drill rod.

    **Di-Corp is testing its rod offering at an independent facility and will publish values as they become available. Pullback is rated on a new, unused drill rod.

  • Section 2 Body: 
    Product Number Size Schedule
    49592 1.5" x 2 TPI 80
    44159 2" x 2 TPI 80
    38575 2" x 2 TPI 40
    49148 6" x 2 TPI 40
  • Section 2 Body: 
    • Instrument Geometry: True Couette Coaxial Cylinder
    • Speed Accuracy (RPM): 0.1
    • Motor Speeds (RPM): 8 Fixed Speeds (600, 300, 200, 100, 60, 30, 6, and 3)
    • Readout: Direct Dial
    • Shipping Dimensions: 22 x 14 x 10 inches (56 x 36 x 25 cm)
    • Shipping Weight: 25 lb (11 kg)
    • Power Requirement: 115 / 230 VAC, 50/60 Hz
    • Power Requirements: 13 - 16 VDC
  • Section 2 Body: 
    • Instrument Geometry: True Couette Coaxial Cylinder
    • Motor Speeds (RPM): 12 Fixed Speeds (600, 300, 200, 100, 60, 30, 20,10, 6, 3, 2, and 1); Variable speed range .006 - 1000
    • Speed Accuracy (RPM): .001
    • Shear Rate Range (sec-1): .01 - 1,700
    • Heat Cup: Stainless Steel, 150 Watts, Maximum Recommended Temp: 190°F (88°C)
    • Power Requirements: 97 - 250 Volts AC, 200 Watts, 50/60 Hz
    • Dimensions (cm): 44 × 38 × 24
    • Weight (kg): 8.6
    • Shipping Weight (kg): 16
    • Shipping Dimensions (cm): 56 × 38 × 24 
    • Computer Requirements: DB-9 Serial Port, Windows 2000 or newer. Recommended screen resolution 1024 × 768 pixels
  • Section 2 Body: 
    • Size: 3.5” x 4” x 11.0” (9 x 10 x 28 cm)
    • Weight: 7 lb 9 oz (3.4 kg)
    • Maximum Temperature: 1000°F (537° C)
    • Temperature Control: Standard – Electronic Fixed Temperature Control
    • Cell Capacity: 10 mL
    • Heating Capacity: 350 Watts
    • Power Requirement: 115 Volt at 3 Amp or 230 Volt at 1.5 Amp, 50/60 Hz
  • Section 2 Body: 
    • Size: 7.5” x 6.5” x 11.5” (19 x 17 x 29 cm)
    • Weight: 12 lb 5 oz (5.6 kg)
    • Maximum Temperature: 1000°F (537°C)
    • Temperature Control: Standard – Electronic Fixed Temperature Control
    • Cell Capacity: 10 mL
    • Heating Capacity: 350 Watts
    • Power Requirement: 115 Volt at 3 Amp or 230 Volt at 1.5 Amp, 50/60 Hz
  • Section 2 Body: 
    • 20 mL Receiver Tube for Retort, 2-scales, 0-100% × 0.1, 0-20 mL × 0.1 mL, with certificate
  • Section 2 Body: 

    20 mL Retort Kit with Thermostat (115V) and 20 mL Retort Kit with Thermostat (230V)

    • Temperature Control: Standard – Electronic Fixed Temperature Control

    20 mL Retort Kit, with Electronic Temperature Controller (115V) and 20 mL Retort Kit, with Electronic Temperature Controller (230V)

    • Temperature Control: Electronic Variable Temperature Control
    • Maximum Temperature: 1000°F (537° C)
    • Cell Capacity: 20 mL Heating Capacity: 500 Watts
    • Power Requirement: 115 Volt at 3 Amp or 230 Volt at 1.5 Amp, 50/60 Hz
    • Size: 9 × 7 × 12 inches (23 × 18 × 30 cm) 20 lb (9.07 kg)
    • Weight: 20 lb (9.07 kg)
  • Section 2 Body: 

    50 mL Retort Kit with Thermostat (115V) and 50 mL Retort Kit with Thermostat (230V)

    • Temperature Control: Standard – Electronic Fixed Temperature Control

    50 mL Retort Kit, with Electronic Temperature Controller (115V) and 50 mL Retort Kit, with Electronic Temperature Controller (230V)

    • Temperature Control: Electronic Variable Temperature Control
    • Maximum Temperature: 1000°F (537° C)
    • Cell Capacity: 50 mL
    • Heating Capacity: 500 Watts
    • Power Requirement: 115 Volt at 3 Amp or 230 Volt at 1.5 Amp, 50/60 Hz
    • Size: 9 × 7 × 12 inches (23 × 18 × 30 cm) 20 lb (9.07 kg)
    • Weight: 20 lb (9.07 kg)
  • Section 2 Body: 

    50 mL Retort Kit with Thermostat (115V) and 50 mL Retort Kit with Thermostat (230V)

    • Temperature Control: Standard – Electronic Fixed Temperature Control

    50 mL Retort Kit, with Electronic Temperature Controller (115V) and 50 mL Retort Kit, with Electronic Temperature Controller (230V)

    • Temperature Control: Electronic Variable Temperature Control
    • Maximum Temperature: 1000°F (537° C)
    • Cell Capacity: 50 mL
    • Heating Capacity: 500 Watts
    • Power Requirement: 115 Volt at 3 Amp or 230 Volt at 1.5 Amp, 50/60 Hz
    • Size: 9 × 7 × 12 inches (23 × 18 × 30 cm) 20 lb (9.07 kg)
    • Weight: 20 lb (9.07 kg)
  • Section 2 Body: 
    • Maximum Pressure: 250 PSI (1,735 kPa)
    • Pressure Source: Any non-hazardous fluid medium, either gas or liquid.
    • Filtration Area: 7.1 ± 0.1 in (4,580 ± 60 mm)
    • Filter Paper Size: 3.5” (9 cm)
  • Section 2 Body: 
    • Maximum Pressure: 250 PSI (1,735 kPa)
    • Pressure Source: Any non-hazardous gas
    • Filtration Area: 7.1 ± 0.1 in (4,580 ± 60 mm)
    • Filter Paper Size: 3.5” (9 cm)
  • Section 2 Body: 
    • Maximum Temperature: 425°F (218.3°C)
    • Maximum Drive Pressure: 1,350 PSI (9.3 MPa)
    • Maximum Back Pressure: 750 PSI (5.2 MPa)
    • Cell Size: 175 mL (test cells sold separately)
    • Pressure Requirements: 3,000 PSI (20.7 MPa)
    • Power Requirements: Two 115-Volt or 230-Volt AC Power Sources
  • Section 2 Body: 

    Density Measurement Ranges:

    • 52 - 164 lb / ft³
    • 6.9 - 21.9 ppg
    • .83 - 2.63 specific gravity
    • 360 - 1130 PSI / 1000 ft
  • Section 2 Body: 
    • Temperature Range: 100 - 450°F (38 - 232.2°C)
    • Digital Temperature Controller
    • Motor Speed: 25 RPM
    • Programmable Timer
    • Heater: 2 x 350 Watts
    • Material:
      • Cabinet: 303 Stainless Steel
      • Rollers: 304 Stainless Steel
    • Capacity (Aging Cells sold separately):
      • 260 mL Aging Cells: 6
      • 500 mL Aging Cells: 3
      • 1000 mL Aging Cells: 3
    • Power Requirements:
      • 115 Volt/230 Volt
    • Dimensions:
      • Size: 26.75” × 22” × 26” (70 × 56 × 66 cm)
      • Weight: 141 lb (64 kg)
      • Crated Size: 35” × 29” × 36” (89 × 74 × 91 cm)
      • Crated Weight: 239 lb (108.4 kg) 1 lb (64 kg)
  • Section 2 Body: 
    • Temperature Range: 100 - 450°F (38 - 232.2°C)
    • Digital Temperature Controller
    • Motor Speed: 25 RPM
    • Programmable Timer
    • Heater: 2 x 350 Watts
    • Material:
      • Cabinet: 303 Stainless Steel
      • Rollers: 304 Stainless Steel
    • Capacity (Aging Cells sold separately):
      • 260 mL Aging Cells: 12
      • 500 mL Aging Cells: 8
      • 1000 mL Aging Cells: 4
    • Power Requirements:
      • 115 Volt/230 Volt
    • Dimensions:
      • Size: 33.75” × 26.25” × 26” (86 × 67 × 66 cm)
      • Weight: 172 lb (78 kg)
      • Crated Size: 38” × 33” × 34” (97 × 84 × 86 cm)
      • Crated Weight: 290 lb (131.5 kg)
  • Section 2 Body: 
    • Thermometer, 5” Stem, Metal Dial, 0° - 220°F (-10° - 100°C)
    • Thermometer, Pocket, 5” Stem, 1” Dial, 0° - 220°F
    • SP - Spare Parts Kit for Emulsion Stability Tester
    • Probe for ES Meter
    • Battery, 9 Volt, Alkaline
  • Section 2 Body: 
    • Resistivity Range - 0.01 to 400 Ohm-Meters
    • Temperature Range - 14 to 140°F (-10 to 60°C)
    • NaCl Measurements - ppm, kppm, gr/gal
    • NaCl Range - 0.2 to 300 kppm
    • Power Requirements - Two 9-Volt Batteries.
  • Section 2 Body: 
    • Size: 3” × 4” × 4.5” (8 × 10 × 11 cm)
    • Weight: 2.6 lb (1.2 kg)
  • Section 2 Body: 
    • Belt-Driven Motor: 1/2 horsepower, 90 Volt DC, 5.5 Amps
    • Maximum 600 inch-pounds of torque
    • Shear rate: 1,000 RPM Maximum
    • Fluid Pressure Range: 5,000 to 10,000 PSI (34,500-69,000 kPa)
    • Size: 19" × 15" × 14" (48.3 × 38.1 × 35.6 cm)
    • Weight: 56 lb. (25.4 kg)
    • Crated Size: 22" × 20" × 21" (56 × 51 × 53 cm)
    • Crated Weight: 95 lb. (43 kg)
    • Power Requirement: 115 / 230 VAC, 50/60 Hz
  • Section 2 Body: 
    • Maximum operating temperature: 600°F (316°C)
    • Maximum operating pressure: 5000 PSI (35.1 MPa) at 600°F (316°C)
  • Section 2 Body: 

    The Low Pressure SGSM fits in a low-pressure UCA test cell. This configuration is compatible with the Twin Cell UCA.

    • Maximum Temperature: 400°F (204°C)
    • Max Operating Pressure: 5,000 PSI (138 MPa)
    • Size (Including Cell): 18.25” Tall × 5.9” Diameter (46 × 15 cm)
    • Weight: 47.2 lg (21.4 kg)
  • Section 2 Body: 

    The High Pressure SGSM fits in a high-pressure UCA test cell. This configuration is compatible with both the Single Cell UCA and the Dual Cell UCA, as shown in the picture.

    • Maximum Temperature: 400°F (204°C)
    • Maximum Pressure: 20,000 PSI (138 MPa)
    • Size (Including Cell): 20” Tall × 6” Diameter (51 × 15 cm)
    • Weight: 50.6 lb (23 kg)
  • Section 2 Body: 
    • Maximum Pressure: Atmospheric
    • Maximum Temperature: 200°F (93.3°C)
    • Heater: 1,500 watts
    • Slurry Cup Rotational Speed: 150 rpm
    • Temperature Control: PID controller
    • Temperature Bath Material: Stainless Steel
    • Display: Digital
    • Size: 24” × 16 × 20 inches (61 × 41 × 51 cm)
    • Weight: 98 lb (44 kg)
    • Crated Size: 32 × 21 × 32 inches (81 × 53 × 81 cm)
    • Crated Weight: 200 lb (91 kg)
  • Section 2 Body: 
    • Air/Nitrogen Supply (100 - 150 PSI / 690 - 1,035 kPa)
    • Water Supply for Cooling (40 PSI / 276 kPa)
    • Water Drain
  • Section 2 Body: 
    • Maximum Pressure: 25,000 PSI (172.4 MPa)
    • Maximum Temperature: 400°F (204°C)
    • Consistency Range: (0 - 125 Bc)
    • Digital Temperature Controller with 0.1° resolution
    • Pressure indicator resolution is 1 PSI and includes both high- and low-pressure alarms
    • Slurry cup rotational speed is variable up to 150 RPM
    • Size: 22.5” × 27.5” × 70” (57 cm × 70 cm × 178 cm)
    • Weight: Approx. 450 lb (204 kg)
    • Crated Size: Approx. 26” × 34” × 76” (66 cm × 86 cm × 193 cm)
    • Crated Weight: Approx. 750 lb (340 kg)
  • Section 2 Body: 
    • Maximum Pressure: 40,000 PSI (275.8 MPa)
    • Maximum Temperature: 600°F (315°C)
    • Consistency Range: (0 - 125 Bc)
    • Digital Temperature Controller with 0.1° resolution
    • Pressure indicator resolution is 100 PSI and includes both high- and low-pressure alarms
    • Slurry cup rotational speed is 150 RPM
    • Size: 22.5" × 27.5" × 70" (57 cm × 70 cm × 178 cm)
    • Weight: Approx. 450 lb (204 kg)
    • Crated Size: Approx. 26" × 34" × 76" (66 cm x 86 cm x 193 cm)
    • Crated Weight: Approx. 750 lb (340 kg)
  • Section 2 Body: 
    • Modified Hassler cell accommodates cores of 1" length and 1" diameter
    • Instrumentation gauge displays driving pressure
    • All Hassler components are fabricated from 316 Stainless Steel
    • Nitrogen test fluid
    • Unit conforms to API Specification 10 guidelines
  • Section 2 Body: 
    • Maximum Temperature: 400°F (260°C)
    • Maximum Pressure: 2,000 PSI (13,880 kPa)
    • Pressure Source: Nitrogen (at least 1500 PSI / 10,343 kPa)- Sold Separately
    • Test Cell Capacity: 500 mL
    • Heater: 800 Watt
    • Size: 10” × 18” × 42” (25.4 × 45.7 × 106.7 cm)
    • Weight: 53 lb. (24.1 kg)
    • Shipping Size: 29” × 12” × 16” (74 × 30.5 × 41 cm)
    • Shipping Weight: 65 lb. (29.5 kg)
    • Power Requirement: 115 Volt/230 Volt
  • Section 2 Body: 
    • Tailored interface so the most common actions are the easiest to locate
    • Tab and drop-down based software, optimizing page screen areas, without sacrificing the amount of information presented at once
    • Capable of testing varying samples and displaying results on a real-time chart
    • Records historical data for easy analysis
  • Section 2 Body: 

    The isCompass is delivered with a rugged handheld computer, the Nautiz X5, running Windows Mobile 6.1. All operations and downloaded data are processed by the computer and can be viewed directly on the handheld device. Quality measurements of survey stations are also provided.


    Field control unit: Nautiz X5, fully rugged handheld (MIL-STD-810G)

    Operating time: Full day of normal operation on one battery (spare battery included)

    Survey Software: isCompass

    Operating System: Windows Mobile 6.1

    Date transfer: USB

  • Section 2 Body: 

    The installers for the isGyro software are small and transferring the installers and updating software is fast and simple. Everything required is in the installer. Even the export of Excel spreadsheets does not require Excel to be installed on the computer. All software runs on Windows XP, Windows 7 and Windows 8 (32 and 64 bit).

     

    Field control unit: Algiz 7, rugged tablet PC, (MIL-STD-810G)

    Operating time: 10 hours normal use

    Survey software: isSurveyor for processing, presentation and quality control

    Operating system: Windows 7 (32 & 64 bit), Windows XP

    Transfer & processing time: < 5 min per hour of survey data

  • Section 2 Body: 

    Field control unit: Algiz 7, rugged tablet PC, (MIL-STD-810G)

    Operating time: 10 hours normal use

    Survey software: isSurveyor for processing, presentation & quality control

    Operating system: Windows 7, 8 (32 & 64 bit), Windows XP

    Transfer & processing time: < 5 min per hour of survey data

  • Section 2 Body: 

    Appearance: Off-white powder

    Density: 1500 kg/m³

    Bulk Density: 450-900 kg/m³

  • Section 2 Body: 

    Appearance: Off-white powder

    Density: 1500 kg/m³

    Bulk Density: 450-900 kg/m³

  • Section 2 Body: 

    Alturnamats ground cover mats are guaranteed against cracking and breaking for one year from date of purchase.

  • Section 2 Body: 
    • Soaks up oil, repels water. Fast acting - soaks up diesel and gasoline fluids, hydrocarbons, heavy and light oils, organic solvents, oil-based paints, vegetable oils, non-aqueous liquids and many liquids designated as hazardous by the EPA. Picks up to 20 times its weight in oil.
    • Non-toxic to humans, animals, fish or fowl.
    • Resists flames and extremes of cold, heat and humidity because of unique chemical structure of inert, non-woven synthetic fibers.
    • Won’t fall apart - has tough, durable bonding.
    • Won’t rot or mildew. Will not disintegrate or deteriorate.
    • Easy to deploy - floats indefinitely.
    • Has high tensile strength - resists tearing or disintegration.
    • Easy to collect with rakes, shovels or pitch forks for quick disposal after saturation.
    • Safe to store in or out doors for quick, easy emergency use.
    • Wide applications and many uses...in power plants, machine shops, industrial plants, process and refining industries, paint and solvent plants, printing plants, tank farms, airports, railroads, fire departments, highway and waterfront safety units.
  • Section 2 Body: 

    SMS can be added directly through the admix bottle or predissolved in the cement mix water tank prior to use. If prehydrating in water, calcium chloride must added first to ensure gel formation. SMS exhibits a natural tendency to absorb humidity from the air. When stored in humid air for prolonged periods, these products may become sticky and cake into solid masses. Store product in a dry place and ensure packaging is tightly sealed.

  • Section 2 Body: 

    Appearance: Colorless viscous liquid

    Bulk Density: 1380 - 1400 kg/m³

  • Section 2 Body: 

    The extending properties of bentonite can be greatly enhanced if the material is allowed to completely hydrate in the mix water prior to slurry mixing. The presence of high concentrations of calcium ion in the aqueous phase of cement slurry inhibits the hydration of Puregold Gel.

  • Section 2 Body: 

    Appearance: White powder

    Specific Gravity: 2.63

    Bulk Density: 1305 kg/m³

    Melting Point: 1725°C

  • Section 2 Body: 

    Appearance: White or grey-white flakes

    Bulk Density: 2150 kg/m³

  • Section 2 Body: 
      Standard (ppm) Set Grout (ppm)   Standard (ppm) Set Grout (ppm)
    Arsenic 5.0 <0.10 Lead 5.0 <0.10
    Barium 100.0 0.50 Mercury 0.2 <0.02
    Cadmium 1.0 <0.05 Selenium 1.0 <0.05
    Chromium 5.0 <0.10 Silver 5.0 <0.10
  • Section 2 Body: 
    • 98% minimum passing 4 mesh
    • 5% maximum passing 20 mesh
    • NSF Certified
  • Section 2 Body: 
    • 97% minimum passing 8 mesh
    • 5% maximum passing 50 mesh
    • NSF Certified
  • Section 2 Body: 
    • 97% minimum passing 8 mesh
    • 5% maximum passing 20 mesh
    • NSF Certified
  • Section 2 Body: 
      Standard (ppm) Set Grout (ppm)
    Arsenic 5.0 <0.10
    Barium 100.0 0.50
    Cadmium 1.0 <0.05
    Chromium 5.0 <0.10
    Lead 5.0 <0.10
    Mercury 0.2 <0.02
    Selenium 1.0 <0.05
    Silver 5.0 <0.10
  • Section 2 Body: 
    Hole Diameter 2" Casing 4" Casing 6" Casing
    4 0.4 gal/ft N/A N/A
    8 1.3 gal/ft 0.7 gal/ft N/A
    6 2.3 gal/ft 1.8 gal/ft 0.8 gal/ft
    10 3.8 gal/ft 3.2 gal/ft 2.3 gal/ft
  • Section 2 Body: 

    Soda Ash is only partially soluble in water so prehydrating or attempting to dissolve it in water and then add it to a system will result in minimal benefit. Soda Ash is best added dry either through a mixing hopper or mechanically dispersed (sprinkled) over the top of the fluid surface or added at a point of agitation. 

    In make up water or to treat contamination from cement, anhydrite or to treat out Ca+ from floc water the flowing guideline is used if hardness can be measured. 

    • 350 mg/L calcium ions requires 1.0 kg/m³ of Soda Ash

    If total hardness or calcium can not be measured at the time of treatment or if blindly pretreating make up water for premixing, add Soda Ash in 0.5 kg/m³ increments until pH is 8.5 - 9.0. Do not exceed 3 kg/m³ without being able to physically determine the effectiveness of the addition either through chemical tests or general analysis of the mud. Over-treatment of Soda Ash can result in carbonate alkalinity and consequent excessive gel strengths and problems due to increased fluid loss. 

  • Section 2 Body: 

    Appearance: Tan colored powder

    Specific Gravity: 1.2

  • Section 2 Body: 

    CRM-19 can be dry blended or prehydrated as required. Avoid breathing dust. Wear the appropriate protective equipment when handling this product. For further information, consult the Material Safety Data Sheet.

  • Section 2 Body: 

    Used as a Slurry Fluid: Maintaining formation integrity while cutting lays the foundation that keeps jacking pressures low. Using Micro-Gel as the slurry fluid limits negative impact on soils and maintains the bore wall continuity. Mixing rate should be 320 pounds of Micro-Gel per 1000 gallons (144 kg/3.8 m³ ). Fluid characteristics will have a Marsh Funnel Viscosity of 45 to 48 sec/qt.

    Used as a Lubricating Fluid: For best results, a venturi or other high-shear equipment should be used. Mix rate is 22.5 pounds per barrel or 535 pounds per 1000 gallons (241 kg/3.8 m³ ) of make-up water. This mix ratio will yield a Marsh Funnel Viscosity of 80 to 85 sec/qt.

  • Section 2 Body: 

    Mix 20 to 50 pounds per 100 gallons of make-up water. This product is designed to be flushed out of the wellbore prior to using the well for drinking water. Before placing a well in service for drinking water it is to be properly flushed and drained until the turbidity of the water is <1 NTU above ambient turbidity.

  • Section 2 Body: 
    Part Number Description
    30685 N3 Kleer-Kore End Cap
    30684 H3 Kleer-Kore End Cap
    39596 P3 Kleer-Kore End Cap
    39570 Kleer-Kore Tube Box 5'
    39571 Kleer-Kore Tube Box Insert
  • Section 2 Body: 
    Description Part Number
    Basket Catcher 2-3/4" Core S395013
    Upper Inner Tube Shoe 2-3/4" Core 3760008948
    Core Lifter Skirtless HF 2-3/4" Core S707179
    Lower Pilot Inner Tube Shoe 2-3/4" Core 3760008050
    Outer Tube Sub Stabilized to 6-1/8"  S637076
    6-1/8" Locking Coupling Stabilized for 6-1/8" PDC Bit S465221
    .380 x .025 x 3.69 Leaf Spring S018022
    Aluminum Rivet 006032130
  • Section 2 Body: 

    Description

    Part Number
    Overshot Swivel Assembly 25555112
    Wireline Extension Rod 18in (.46m) 27012485
    Wireline Extension Rod 46in (1.17m) 25555079
    Positive Latch Lowering Tool 25361023
    Loading Funnel 3760008036
  • Section 2 Body: 
    Part Number Description
    42006 Liners
    42004 Liner Packaging
    42187 API Piston Rod
    41827 Rod Packaging
    41958 Gasket Cylinder Head
    42184 Piston API-1
    42183 Piston Repair Kit
    27025 Junk Ring (Thin)
    27024 Junk Ring (Thick)
    42391 Valve Gravel/Rubber Insert
    41959 Gasket Valve Cover
    42390 Seat Gravel
    48783 Seat Standard
    48782 Rubber Insert Standard Valve
    27075 Valve Inserts
    44382 Standard Poly Valve Insert
    47371 Shear Pin (Red)
    47325 Shear Pin (Blue)
  • Section 2 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 30lb bag

  • Section 2 Body: 

    Super-Sweep Fiber is easily added and pre-mixed in the drilling fluid at various concentration levels, depending on the level of solids suspension desired. In water, a minimum dosage of one box (15 pounds) of Super-Sweep Fiber per 30 barrel sweep has shown to be an effective addition level to remove cuttings and solids.

    In drilling mud, a minimum dosage of one box (15 pounds) of Super-Sweep Fiber per 60 barrel sweep has proven effective. The fluid with the Super-Sweep Fiber is then introduced by pump suction to the drilling fluids system and circulated through the drilling system. The Super-Sweep Fiber and transported cuttings are removed by the shaker or discharged to the reserve pit. 

  • Section 2 Body: 

    Appearance: Amber/dark liquid

    Specific Gravity: 1.06-1.09

    Pour Point: -30ºC

    Flash Point: > 93.3ºC (TCC)

  • Section 2 Body: 

    Appearance: Black-grey powder

    Specific Gravity: 2.25

    Moisture Content: 0.5%

  • Section 2 Body: 
    Part Number Description
    102596 NWL Rod Box to Solid Blank
    102597 ND Rod Box to Solid Blank
    102598 NWL Rod Pin to Solid Blank
    102599 ND Rod Pin to Solid Blank
  • Section 2 Body: 
    Part Number Description
    102606 NWL Rod Box to Tubing Blank
    102607 ND Rod Box to Tubing Blank
    102608 NWL Rod Pin to Tubing Blank
    102609 ND Rod Pin to Tubing Blank
  • Section 2 Body: 
    Part Number Description Hoisting Weight
    100667 AW Rod Pin to NWL Rod Pin 5,000 LB
    100852 AW Rod Pin to ND Rod Pin 5,000 LB
    100595 NW Rod Pin to NWL Rod Pin 10,000/30,000 LB
    102589 NW Rod Pin to ND Rod Pin 10,000/30,000 LB
    102590 NW Rod Pin to NWL Bullnose 10,000/30,000 LB
    102591 NW Rod Pin to ND Bullnose 10,000/30,000 LB
  • Section 2 Body: 
    Part Number Description
    100685 NWL Rod Box to NW Rod Pin (Rod to Casing)
    102593 ND Rod Box to NW Rod Pin (Rod to Casing)
    100684 NWL Rod Box to BW Rod Pin (Rod to Rod)
    101133 ND Rod Box to BW Rod Pin (Rod to Rod)
  • Section 2 Body: 
    Part Number Description
    100673 NWL Rod Box to NW Casing Pin
    102592 ND Rod Box to NW Casing Pin
  • Section 2 Body: 
    Part Number Description
    100834 NWL Rod Box to ND Rod Pin
    100835 ND Rod Box to NWL Rod Pin
  • Section 2 Body: 
    Part Number Description
    102594 NWL Water Saver Sub
    102595 ND Water Saver Sub
  • Section 2 Body: 
    Part Number Description
    100667 AW Rod Pin to NWL Rod Pin (Compact)
    100852 AW Rod Pin to ND Rod Pin (Compact)
    100593 BW Rod Pin to NWL Rod Pin (Universal)
    102588 BW Rod Pin to ND Rod Pin (Universal)
  • Section 2 Body: 
    Part Number Description Crown Waterway Configuration
    103031 N3 Carbonado (OS 3.032) W Superflush Waterway
    102881 N3 Carbonado Tapered Wide Waterway
    103833 N3 Carbonado W Wide Waterway
  • Section 2 Body: 
    Part Number Description
    103349 NW Casing Bit
    102796 HWL Casing Bit
  • Section 2 Body: 
    Part Number Description
    101017 NW Level 1 Casing Shoe
    101007 NW Level 2 Casing Shoe
    103521 NW Carbonado Casing Shoe
  • Section 2 Body: 
    Part Number Drilling Parameter Edge Series Waterway Configuration
    103353 BTW 2-4 Edge 2 Abrasive Standard
    101602 BTW 4-6 Edge 5 Standard
    101211 BTW 4-6 Edge 5 Wide
    101603 BTW 6-7 Edge 6 Standard
    101639 BTW 6-7 Edge 6 Wide
    103354 BTW 7-8 Edge 7 Standard
    101638 BTW 6-8 Edge 7 Endurance Standard
    101640 BTW 6-8 Edge 7 Endurance Wide
    101777 BTW 7-8 Edge 8 Standard
    103610 BTW 7-9 Edge 8 Endurance Standard
    101209 BTW 7-10 Edge 9 Standard
    101210 BTW 7-9 Edge 9 Endurance Standard
    101641 BTW 7-9 Edge 9 Endurance Wide
    103167 BTW 9-10 Edge 10 Standard
  • Section 2 Body: 
    Part Number Description
    101765 N Standard Reaming Shell
    102728 N Stabilized Reaming Shell (10" long)
    103383 N Double Stabilized Reaming Shell (18" long)
    103309 NTW Standard Reaming Shell
    103310 NTW Stabilized Reaming Shell
  • Section 2 Body: 
    Part Number Description
    102217 HWL (T11) Rod Shoe 
    102662 HWL (T12) Rod Shoe
    103824 HWL Carbonado OS 4.765 Rod Shoe
  • Section 2 Body: 
    Part Number Description Qty
    101940 Casing Advancer Assembly -
    102003 Inner Assembly, Casing Advancer -
    102004 Spearhead 1
    102005 Nord-Lock Washer 1
    102006 Release Shaft 1
    102007 Latch Body 1
    102008 Latch Shoe 2
    102009 Spring 2
    102010 Locating Pin 2
    102011 Stop Latch Set 1
    102012 Stop Latch Pin 1
    101889 Split Cotter Pin 2
    101890 Stop Latch Spring 1
    102013 Spacer Set 1
    102014 Bit Sub 1
    102015 Loading Sleeve 1
    101939 Driver 1
  • Section 2 Body: 
    Part Number Description Qty
    101389 Compact Plus Water Swivel Spares -
    101354 Wavy Washer 2
    101355 O-Ring, Upper 6
    101356 Swivel Packing Set 3
    101357 Wear Sleeve, Slotted 2
    101359 Ball Bearing 1
    101361 O-Ring, Lower 6
    101363 Thrust Bearing 1
    101365 Felt Seal 2
  • Section 2 Body: 
    Part Number Description Qty
    101865 Water Swivel Assembly, Compact Plus -
    101864 Swivel Cap 1
    101354 Wavy Washer 1
    101355 O-Ring, Upper 1
    101356 Swivel Packing Set 1
    101357 Wear Sleeve, Slotted 1
    101358 Packing Cage 1
    101359 Ball Bearing 1
    101360 Swivel Body, Upper 1
    101361 O-Ring, Lower 1
    101362 Spindle 1
    101363 Thrust Bearing 1
    101364 Swivel Body, Lower 1
    100461 Grease Fitting 1
    101365 Felt Seal 1
  • Section 2 Body: 
    Part Number Description Qty
    101087 OD Gauge Assembly -
    101085 OD Gauge, Drill Rod New 1
    101057 OD Gauge, Drill Rod Wear 1
    101084 Lock Nut, OD Gauge 1
    101083 Flat Washer, OD Gauge 2
    101082 Hex Bolt, OD Gauge 1
    101090 Wear Sample -
  • Section 2 Body: 
    Part Number Description Qty
    101105 Gauge Assembly, Bit & Shell -
    101116 Gauge, Max New Shell 1
    101117 Gauge, Min New Shell 1
    101118 Gauge, Max New Bit / Worn Shell 1
    101119 Gauge, Min New Bit 1
    101128 Hex Bolt, 1/4-20 UNC x 2" Long, Zinc Plated 1
    101129 Washer, 17/64" ID x 1/2" OD, Zinc Plated 2
    101130 Nylock Nit, 1/4-20 UNC, Zinc Plated 1
  • Section 2 Body: 
    Part Number Description Qty
    100756 Core Barrel Assembly, 3 m (10 ft) -
    100755 Core Barrel Assembly, 1.5 m (5 ft) -
    100739 Locking Coupling, Conventional, No Tang
    102490 Adaptor Coupling
    100737 Landing Ring 1
    100726 Outer Tube, 3 m (10 ft) 1
    100758 Outer Tube, 1.5 m (5 ft) -
    100734 Inner Tube Stabilizer 1
    100752 Head Assembly 1
    100725 Inner Tube, 3 m (10 ft) 1
    100757 Inner Tube, 1.5 m (5 ft) -
    100730 Stop Ring 1
    100731 Core Lifter, Slotted 1
    100733 Core Lifter Case 1

     

    Options
    Part Number Description
    100763 Locking Coupling, Full Hole, No Tang
    100551 Landing Indicator Bushing, No OD Groove
    100582 Shut-Off Valve, Soft
    101818 Solid Spindle Spacer
    101821 Inner Tube Cap Assembly, With Thd. Protector
    100708 Inner Tube Coupling
    100762 Inner Tube Extension, Stabilized (10") Shell
    101810 Inner Tube Extension, Double Stabilized (18") Shell
    100732 Core Lifter, Fluted
    101623 Core Lifter, Slotted, Diamond Coated
    101624 Core Lifter, Fluted, Diamond Coated
    101566 Core Lifter, Smooth
    100644 Graphite Core Barrel Plug
    101104 Gauge Assembly, Bit & Shell
    100776 Outer Tube, Chrome Plated, 3.0 m (10 ft)
    100775 Outer Tube, Chrome Plated, 1.5 m (5 ft)
    100761 Inner Tube, Chrome Plated, 3.0 m (10 ft)
    100760 Inner Tube, Chrome Plated, 1.5 m (5 ft)
    101152 Parts Pouch
    100611 Fluid Retention Kit
    102452 Quick Coupler, #16 NPT Female
  • Section 2 Body: 
    Conversion Kit
    Part Number Description Qty
    101424 Link-Latch to Edge Latch Conversion Kit -
    100808 Latch 2
    100450 Latch Spring 1
    100449 Latch Retracting Pin 2
    100451 Latch Pivot Pin 1
    100666 Drift Pin Tool, Latch Retracting Pin 1
    100877 Drift Pin Tool, Latch Pivot Pin 1
    101427 Conversion Instructions 1
    101152 Parts Pouch 1

    To simplify the conversion of your current core barrel systems to the Edge Latch system, Di-Corp offers a conversion assembly which can be attached to the spindle of most systems.

    Conversion Head Assembly
    Part Number Description Qty
    100883 Core Barrel Conversion Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 1
    100464 Spearhead Base 1
    100449 Latch Retracting Pin 2
    100465 Latch Retracting Case 1
    100466 Latch Body, Upper 1
    100451 Latch Pivot Pin 1
    100450 Latch Spring 1
    100808 Latch 2
    100469 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100470 Latch Body, Lower 1
    100453 Lock Washer 1
  • Section 2 Body: 
    Part Number Description Qty
    100752 Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Spring Pin, ø7/16" x 1" Long 1
    100712 Spearhead Base 1
    100747 Latch Locking Spring 1
    100746 Latch Locking Pin 1
    100701 Latch Retracting Pin 2
    100743 Latch Retracting Case 1
    100744 Latch Retracting Case Pin 1
    100745 Latch Body, Upper 1
    100702 Latch Pivot Pin 1
    100722 Latch Spring 1
    100715 Latch 2
    100827 Spring Seat 1
    100801 Latch Retracting Case Spring 1
    100826 Spring Sleeve 1
    100828 Spring Cavity Bushing 1
    100749 Latch Body Adaptor 1
    100750 Pump-In Seal 2
    100751 Latch Body Seal Seat 1
    100452 Stainless Steel Ball 1
    100468 Landing Indicator Bushing, OD Groove 1
    100716 Landing Shoulder 1
    100717 Latch Body, Lower 1
    100703 Nord-Lock Washer 1
    100704 Hex Nut 1
    100718 Spindle 1
    100705 Shut-Off Valve, Hard 2
    100706 Shut-Off Washer 2
    100707 Spindle Bearing 2
    100719 Spindle Bushing 1
    100709 Compression Spring 1
    100711 Self Locking Hex Nut 1
    100721 Inner Tube Cap Assembly, No Thd. Protector 1
    100639 Thread Protector, Inner Tube Cap 1

     

  • Section 2 Body: 
    BU Loading Chamber Assembly
    Part Number Description Qty
    101277 BU Loading Chamber Assembly -
    100910 Packing Plug 1
    100911 Cable Guide Washer 2
    100912 Cable Packing 1
    100913 Quick Coupler, #16 NPT 1
    101278 Loading Chamber Body 1
  • Section 2 Body: 
    Part Number Description Qty
    100504 Core Barrel Spares Kit -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 2
    100449 Latch Retracting Pin 2
    100450 Latch Spring 2
    100808 Latch 4
    100451 Latch Pivot Pin 2
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 2
    100469 Landing Shoulder 1
    100454 Hex Nut 1
    100455 Shut Off Valve, Hard 4
    100457 Bearing, Upper 1
    100458 Bearing, Lower 1
    100460 Self Locking Nut 1
    100461 Grease Fitting 2
    100417 Stop Ring 2
    100415 Core Lifter, Slotted 20
    100416 Core Lifter Case 4
    100439 Landing Ring 1
    100443 Inner Tube Stabilizer 2
  • Section 2 Body: 
    Part Number Description
    100632 Inner Tube Coupling
    100552 Inner Tube Extension, Stabilized (10") Reaming Shell
    100903 Inner Tube Extension, Double Stabilized (18") Reaming Shell
  • Section 2 Body: 
    Part Number Description Qty
    100890 Overshot Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100836 Cable Swivel Body 1
    100838 Shear Pin 1
    100884 Upper Body 1
    100750 Pump-In Seal 2
    100751 Latch Body Seal Seat 1
    100452 Stainless Steel Ball 2
    100468 Landing Indicator Bushing, OD Groove 1
    100885 Overshot Head Body 1
    100888 Compression Spring 1
    100886 Pivot Pin 1
    100887 Sway Pin 1
    100889 Lifting Dog 2
  • Section 2 Body: 
    Part Number Description Qty
    100635 Overshot Assembly, Rolling -
    100604 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100628 Roller Wheel 6
    100631 Spring Pin, ø3/8" x 1-1/2" Long 6
    100638 Cable Swivel Roller Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100526 Hex Nut, 3/4" UNC 2
    100527 Nord-Lock Washer 2
    100637 Roller Body 1
    100528 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100689 Overshot Loading Funnel 1
  • Section 2 Body: 
    Part Number Description Qty
    101434 Overshot Spares Kit -
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 2
    100461 Grease Fitting 1
    100526 Hex Nut, 3/4" UNC 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link, Overshot 2
    100539 Self Locking Cap Screw 4
  • Section 2 Body: 
    Product Number Product Name Packaging
    44269 Sand #40 Bodyshot 99% Silica 50lb
  • Section 2 Body: 

    When faced with the challenge of viscosifying saline water sources that exist in marine environments and in some cases terrestrial water sources Earth Pro SaltVis L rises to the occasion.

    Concentration depends on the desired viscosity but most applications will see good hole cleaning and lubrication affect with a 2-4L/m³ concentration of Earth Pro SaltVis L.

    Earth Pro SaltVis L can be mixed quickly to the desired concentration by pouring it in at a point of agitation in the mixing tanks or adding it through a hopper system.

    Requires minimal shearing to yield very consistently and quickly compared to semi synthetic or natural polymers.

  • Section 2 Body: 
    • 12 Volt DC Diesel Furnace – Fuel efficient 1.00 to 2.25 gal. of fuel per hour
    • 110 Volt AC Diesel Furnace – Fuel efficient .50 to 3.00 gal. of fuel per hour
    • Propane Fired Torch c/w Regulator and Line Kit
    • Emergency Shut Down Switch
    • High Limit Automatic Heat Shut Down Sensor
    • Furnace By Pass switch
    • 16” Foam Filled Tires
    • ATV Trailer Hitch
    • Low RPM Alternator with FMC Pump mounting brackets
  • Section 2 Body: 

    Appearance: Brown powder

    Specific Gravity: 1.06

    Flash Point: >93°C

  • Section 2 Body: 

    Add Earth Pro Brine-Lube at the pump suction for reduction of torque and drag.

    Earth Pro Brine-Lube can be added as required to improve the sliding of the drill string when building or maintaining hole angle. Skin and eye protection should be observed.

    (See Material Safety Data Sheet for further information).

  • Section 2 Body: 

    Earth Pro Brine-Cor should be added directly to the mud system. It dissolves readily even in the heavier brines.

    Avoid contact with eyes and skin. In case of contact, immediately wash with plenty of water. Flush eyes with flowing water immediately and continuously for twenty minutes. See a physician if necessary. Remove contaminated clothes and shoes and wash before re-use.

  • Section 2 Body: 

    Appearance: Colorless to yellow liquid

    Specific Gravity: 0.9

    Pour Point: -25°C

    Flash Point: 46°C (CC)

    Boiling Point: 95°C

  • Section 2 Body: 

    Appearance: Clear colorless to yellow liquid

    Specific Gravity: 1.06 @ 20°C

    Freeze Point: -5°C

  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Specifications
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Oilfield Application
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Application
  • Section 1 Title: Specifications
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application and Concentration
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Specifications
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Physical Properties
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application and Concentration
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Slurry Property Summary
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Physical Properties
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Application
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Specifications
  • Section 1 Title: Concentration
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Application
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Liners
  • Section 1 Title: Sizes Available
  • Section 1 Title: MAASS Pitless Adapters
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Variperm Stainless Steel Screens - Male x Female
  • Section 1 Title: Steel K-Packers
  • Section 1 Title: Target (NSF Certified)
  • Section 1 Title: Target (NSF Certified)
  • Section 1 Title: Sizes Available
  • Section 1 Title: PVC Casing
  • Section 1 Title: Steel Casing Sizes Available
  • Section 1 Title: Standard
  • Section 1 Title: Unicoil with U-Bend Cap and Air
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Casing Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Schedule 40
  • Section 1 Title: Stainless Steel Centralizers
  • Section 1 Title: Sizes Available
  • Section 1 Title: Casing Protector Sizes Available
  • Section 1 Title: ABS Well Seals
  • Section 1 Title: Sizes Available
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Recommended Devices
  • Section 1 Title: Recommended Devices
  • Section 1 Title: Recommended Devices
  • Section 1 Title: Recommended Devices
  • Section 1 Title: Surge Blocks available for 2” Wells
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Standard 2" HydraSleeve
  • Section 1 Title: 4" Standard
  • Section 1 Title: SuperSleeve 2L
  • Section 1 Title: 5 oz. Bullet Weight & Weight Clip
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: 0.2 Micron CAP300X2
  • Section 1 Title: Kwik Klamp 1
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Components
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: Sizes Available
  • Section 1 Title: PVC Sandpoints
  • Section 1 Title: Items Included
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Standard Features
  • Section 1 Title: Specifications
  • Section 1 Title: Features
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Specifications
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Specifications
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Method of Operation
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Specifications
  • Section 1 Title: Specifications
  • Section 1 Title: Specifications
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Convenient & Economical
  • Section 1 Title: Components
  • Section 1 Title: Security & Environmental Protection
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing Ratios
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Sizes Available
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Sizes Available
  • Section 1 Title: Spare Parts for Assembly
  • Section 1 Title: Available Parts
  • Section 1 Title: Gardner Denver 5 x 6 Duplex Mud Pump Parts
  • Section 1 Title: Application
  • Section 1 Title: Parts Available
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: N Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: B Sizes Available
  • Section 1 Title: N Sizes Available
  • Section 1 Title: BW Casing Advancer Assembly and Parts
  • Section 1 Title: B Compact Plus Water Swivel Spares Kit and Parts
  • Section 1 Title: B Compact Plus Water Swivel Assembly
  • Section 1 Title: B Rod Gauge
  • Section 1 Title: B Bit Gauge
  • Section 1 Title: B Core Barrel Assembly & Options
  • Section 1 Title: B Conversion Kit & Head Assembly
  • Section 1 Title: B Head Assembly & Options
  • Section 1 Title: B Core Barrel Kit
  • Section 1 Title: B Core Barrel Spares
  • Section 1 Title: B Extended Core Barrel Option
  • Section 1 Title: B Overshot Assembly
  • Section 1 Title: B Overshot Assembly - Rolling
  • Section 1 Title: B Overshot Spares
  • Section 1 Title: Hutcheson Sand Mixes
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Features & Benefits
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Application
  • Section 1 Title: Application
  • Section 1 Title: Mixing & Handling
  • Section 1 Title: Mixing & Handling
  • Section 3 Body: 

    Type: Charcoal

    Solubility: Negligible (water and oil)

    pH: 4.0 - 6.0

  • Section 3 Body: 

    AppearanceOff white liquid

    Specific Gravity: 1.08 - 1.12

    Pour Point: -30°C

    Flash Point: 100°C

  • Section 3 Body: 

    Type: Enzymes and acid blend

    Solubility: Soluble (water)

  • Section 3 Body: 

    Type: Blend

    Solubility: Dispersible (water)

    Microtox: 30% @ 0.5L/m³

  • Section 3 Body: 

    Appearance: Clear to yellow liquid

    Specific Gravity: 1.05

    Flash Point: >93°C

  • Section 3 Body: 

    Type: Blend

    Solubility: Forms suspension (Water)

    pH: N/A

    Microtox: 1.1 kg/m³

  • Section 3 Body: 

    Appearance: Clear, colorless liquid

    Specific Gravity: 1.25

    Gravity: -15°C

    Melting Point: >150°C (PMCC)

  • Section 3 Body: 

    Appearance: Opaque-white liquid

    Density: .98 - 1.02 kg/m³

    Pour Point: 0°C

    Boiling Point: 204 - 371°C

    Flash Point: 150°C (closed cup)

  • Section 3 Body: 

    Appearance: Pale yellow liquid

    Specific Gravity: 1.29

    Flash Point: >100°C (212°F)

  • Section 3 Body: 

    Appearance: White powder

    Specific Gravity: 0.75 - 0.85

  • Section 3 Body: 

    Appearance: Medium blue liquid

    Specific Gravity: 1.0

    Melting Point: 15°C

  • Section 3 Body: 

    Earth Pro Emul is often used in conjunction with Earth Pro Wet as required by muds with very high solids content. The amount of Earth Pro Emul should always equal or be higher than the amount of Earth Pro Wet used. Employ rubber gloves, rubber apron, and skin and eye protection and ensure mixing is done in an area with adequate ventilation.

  • Section 3 Body: 

    Appearance: Colorless liquid

    Specific Gravity: 1.005 g/mL

    Pour Point: -20°C (-4°F)

    Flash Point: >150°C (302°F) - CC

  • Section 3 Body: 

    Appearance: Clear liquid

    Specific Gravity: 0.90

    Pour Point: >-20°C

    Flash Point: >100°C (TCC)

  • Section 3 Body: 

    Type: Fluid loss additive

    Solubility: Forms gel

    pH: 3.5 - 6.5

  • Section 3 Body: 

    Appearance: Dark liquid

    Specific Gravity: .96

    Pour Point: <-20°C

    Flash Point: >93.3°C (CC)

  • Section 3 Body: 

    Type: Xanthan gum

    Solubility: Soluble in water

    pH: 6.0 - 8.0 (1% solution)

  • Section 3 Body: 

    Type: Xanthan gum

    Solubility: Soluble in water

  • Section 3 Body: 

    Fe2O3: 92% (min)

    SiO2 + Al2O3: 4% (max)

  • Section 3 Body: 

    Type: Ester

    Solubility: Not soluble in water

    Microtox: >91% @ 0.17 L/m³

  • Section 3 Body: 

    Appearance: Amber liquid

    Specific Gravity: .93

    Pour Point: <-20°C

    Flash Point: >93°C (PMCC)

  • Section 3 Body: 

    Type: Sodium montmorillonite

    pH: 9.1 (5% solution)

    Property Percentage
    Loss on Ignition 4.4%
    Silicon Oxide 61.4%
    Aluminum Oxide 18.1%
    Ferric Oxide 3.5%
    Sodium Oxide 2.3%
    Magnesium Oxide 1.7%
    Calcium Oxide 2.3%
    Titanium Oxide 0.2%
    Potassium Oxide 0.1%
    Water 7.8%
    Other 0.07%
  • Section 3 Body: 

    Type: Surfactant

    Solubility: Insoluble-dispersible (water)

    pH: 7.0 - 8.0

    Microtox: >75% @ 0.5 L/m³

  • Section 3 Body: 

    Appearance: Free-flowing crystalline

    Molecular Weight: 200

    Melting Point: 130°C

  • Section 3 Body: 

    Appearance: Off white powder

    Specific Gravity: 0.85

  • Section 3 Body: 

    Appearance: White to cream liquid

    Specific Gravity: 1.1

    Boiling Point: >100°C

    Flash Point: >93°C (PMCC)

  • Section 3 Body: 

    Appearance: White powder

    Specific Gravity: 0.75-1.00

    Bulk Density: 800-810 kg/m³

  • Section 3 Body: 

    Appearance: White powder

    Specific Gravity: 0.75 - 1.00

    Bulk Density: 800 - 810 kg/m³

  • Section 3 Body: 

    Type: Co-polymer

    Solubility: Soluble-Dispersible

    Microtox: >100% @ 2.86 kg/m³

    Character: HMW Anionic

  • Section 3 Body: 

    Appearance: White powder

    Specific Gravity: 1.01

    Melting Point: 115-125°C

  • Section 3 Body: 

    Type: Modified polysaccharide

    Solubility: 100% in water

    pH: 8.0 - 10.0 (2% solution)

    Microtox: 0.36 kg/m³

  • Section 3 Body: 

    Barite can be mixed through the mud hopper as rapidly as needed. When large quantities are added to a mud system it may be necessary to add water to prevent mud dehydration.

  • Section 3 Body: 

    Appearance: Grey-white-buff powder

    Specific Gravity: 2.7 - 2.9

    Melting Point: 2570°C

    Grind Size Cal Carb 0: 99% passing 40 mesh

  • Section 3 Body: 

    Appearance: Grey-white-buff powder

    Specific Gravity: 2.7 - 2.9

    Melting Point: 2570°C

    Grind Size: 99.8% passing 5 mesh

  • Section 3 Body: 

    Appearance: Grey-white-buff powder

    Specific Gravity: 2.7 - 2.9

    Melting Point: 2570°C

    Grind Size: 99.2% passing 20 mesh

  • Section 3 Body: 

    Type: Calcium chloride

    Solubility: 60% in water

    pH: 8.0 - 9.0 (35% solution)

  • Section 3 Body: 

    Type: Salt

    Solubility: Soluble in water

    pH: 6.0 (5% solution)

    Microtox: 52% @ 1.4 kg/m³

  • Section 3 Body: 

    Appearance: White flakes

    Specific Gravity: 2.04 @ 20°C

    Melting Point: 400°C

  • Section 3 Body: 

    Caustic Soda Beads are a strong alkali and produces a strong basic solution. The reaction with water generates heat.

    Caustic Soda Beads will cause severe burns and skin/eye contact is to be avoided at all times. To avoid contact, wear a protective apron, full clothing, rubber gloves, goggles and face mask.

    In the event of contact wash immediately with water for 15 minutes. Seek medical attention if burning persists or if the contacted area is inflamed.

    *DANGER* Always add Caustic Soda to the water and watch for bubbling and splashing.

  • Section 3 Body: 

    Cellophane is used to provide a sealing agent supplement to other lost circulation material in water based drilling muds. It is also a basic additive in cement slurries, providing a matting effect in the control of losses. Typical rates of addition up to 2% by wt. cement are used as a preventative measure.

  • Section 3 Body: 

    Appearance: Fine reddish brown powder with white specs

    Specific Gravity: 1.5 - 1.7

  • Section 3 Body: 

    Appearance: Dark amber liquid

    Specific Gravity: 0.86

    Pour Point: <-5°C

    Flash Point: 75°C

  • Section 3 Body: 

    Appearance: Colorless and odorless grains

    Specific Gravity: 1.65

    Molecular Weight: 192.14

    Molecular Formula: HOC(CH2CO 2H) 2CO2H

    Melting Point: 153°C

  • Section 3 Body: 

    Appearance: Red-brown powder

    Specific Gravity: 4.8 - 5.0

    Bulk Density: 2400 - 2600 kg/m³

    Particle Size: +/- 94-98% passing 74µ

    Blaine: 1300-2100 cm²/gram

  • Section 3 Body: 

    Type: Pre-gelantinized cornstarch

    Solubility: Soluble in water

    pH: 5.0 - 7.0 (4% solution)

    Microtox: 47% @ 8.0 kg/m³

  • Section 3 Body: 

    Appearance: Light colored powder

    Specific Gravity: 1.6

  • Section 3 Body: 

    Type: Demulsifier

    Solubility: Dispersible in water

    pH: 8.78

    Microtox: 42% @1.0 kg/m³

  • Section 3 Body: 

    Type: Sodium montmorillonite

    Solubility: Not soluble (colloidal suspension)

    pH: 8.0 - 10.0 (5% solution)

    SiO2 61.4% MgO 1.70%
    Al2O3 18.1% CaO3 0.40%
    Fe2O3 3.50% TiO2 0.20%
    K2O 0.10% Na2O 2.30%
    H2O 7.80% Other 0.07%
    LOS 4.40% (Loss on Ignition)
  • Section 3 Body: 

    Appearance: Light tan-grey powder

    Relative Density (water=1): 2.45 - 2.55

  • Section 3 Body: 

    Type: Organic fiber

  • Section 3 Body: 

    Type: Hydrocarbon resin

    Solubility: Soluble

  • Section 3 Body: 

    Type: Lime-soda glass

    Solubility: Not soluble

  • Section 3 Body: 

    Type: Carbon

    Solubility: Not soluble

  • Section 3 Body: 

    Type: Amine

    Solubility: Dispersible in water

    Vapor Pressure (mmHg): 9.98 @ 38°C

  • Section 3 Body: 

    Type: Humalite (Humic acid)

    Solubility: Soluble (pH dependant)

    pH: 3.5 - 4.0

  • Section 3 Body: 

    Type: Calcium hydroxide

    Solubility: 0.165g/100g @ 20°C

    pH: 12.45

  • Section 3 Body: 

    Type: Co-polymer

    Solubility: Dispersible-soluble

    pH: 6.0 - 8.0 (0.5% solution)

    Microtox: >91% @ 3.0 kg/m³

  • Section 3 Body: 

    Type: Flocculant

    Solubility: Dispersible-soluble

    pH: 6.0 - 8.0 (0.5% solution)

    Microtox: >91% @ 3.0 kg/m³

  • Section 3 Body: 

    Appearance: White granular powder

    Bulk Density: 0.7 kg/m³

  • Section 3 Body: 

    Type: Cationic polyacrylamide

    Solubility: Dispersible-soluble

    pH: 2.5 - 4.5

    Microtox: >91% @ 3.0 kg/m³

    Charge Density: 10% molecular

    Weight: Medium

  • Section 3 Body: 

    Type: Cationic polyacrylamide

    Solubility: Dispersible-soluble

    pH: 2.5 - 4.5

    Charge Density: 80%

    Weight: Medium

  • Section 3 Body: 

    Type: Cationic polyacrylamide

    Solubility: Dispersible-soluble

    pH: 2.5 - 4.5

  • Section 3 Body: 

    Type: Co-polymer

    Solubility: Dispersible-soluble

    pH: 6.0 - 8.0 (0.5% solution)

    Microtox: >91% @ 3.0 kg/m³

  • Section 3 Body: 

    Type: Xanthan Gum

    Solubility: Soluble in water

    pH: 7.0 (1% solution)

  • Section 3 Body: 

    Appearance: White/grey fibrous material

    Specific Gravity: 2.6

    Melting Point: 1315°C

  • Section 3 Body: 

    Type: Cationic polyacrylamide

    Solubility: Soluble-dispersible

    Charge Density: 10%

    Microtox: >91% @ 0.1 L/m³

  • Section 3 Body: 

    Appearance: Light colored powder

    Specific Gravity: 3.6

    Bulk Density: 400 kg/m³

    Melting Point: 2800°C

  • Section 3 Body: 

    Type: Anionic alcohol

    Solubility: Insoluble

    pH: 7.0 - 8.0

  • Section 3 Body: 

    Solubility: 100% soluble in water

    pH: 6.5 - 8.5 (1% solution)

  • Section 3 Body: 

    Appearance: Light tan-grey powder or granules

    Specific Gravity: 2.45 - 2.55

    Melting Point: 1450°C

    Bulk Density: 49 - 55 lbs/ft³

  • Section 3 Body: 

    Type: Modified bentonite

    Solubility: Insoluble in water and oil suspension

  • Section 3 Body: 

    Appearance: Red/brown powder

    Specific Gravity: 0.75

    Bulk Density: 600 kg/m³

  • Section 3 Body: 

    Appearance: Brown powder

  • Section 3 Body: 

    Type: Salt

    Solubility: Soluble in water

    pH: 5.4 - 8.6 (5% solution)

  • Section 3 Body: 

    Appearance: Yellow/brown particles

    Specific Gravity: 0.9 - 1.2

  • Section 3 Body: 

    Type: Calcium oxide

    Solubility: Soluble in water

    pH: 12.45 (saturated solution)

    Chemical Percentage
    Calcium Oxide 95%
    Acid Insolubles 1.99%
    Magnesium Oxide 1.97%
    Loss on Ignition 0.50%
  • Section 3 Body: 

    Type: Vulcanized rubber

  • Section 3 Body: 

    Type: Filming amine

    Solubility: Soluble in oil

    Microtox: 50% @ 0.5 L/m³

  • Section 3 Body: 

    Type: Acid

    Solubility: Soluble (13 gm/100mL water @ 25°C)

    pH: 4.0 (1% solution)

    Microtox: 50% @ 0.25 kg/m³

  • Section 3 Body: 

    Type: Magnesium silicate

    Solubility: Insoluble in water

    pH: 7.0 - 8.3

    Properties Percentage
    Silicone 56.0%
    Aluminum 4.0%
    Iron 1.0%
    Calcium 0.5%
    Magnesium 20.0%
    Sodium 1.4%
    Potassium 1.4%
  • Section 3 Body: 

    Type: Mixture

    Solubility: 100% in water

  • Section 3 Body: 

    Type: Chemical compound

    Solubility: Soluble (18% @ 21°C)

  • Section 3 Body: 

    Appearance: White crystalline powder

    Specific Gravity: 2.22

    Bulk Density: 1040 kg/m³

    Melting Point: 270°C

  • Section 3 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 3 Body: 

    Type: Oxygen scavenger

    Solubility: Soluble (17.0% @ 10°C)

    Microtox: >91% @ 1.0 kg/m³

  • Section 3 Body: 

    Type: Cellulose fluid loss polymer

    Solubility: 100% soluble in water 

    pH: 6.5 - 8.0

  • Section 3 Body: 

    Type: Modified polysaccharide

    Solubility: 100% soluble in water

    pH: 9.0 - 10.5

    Microtox: MTX 27.0 kg/m³

  • Section 3 Body: 

    Type: Acid

    Solubility: Soluble (22g/100g water @ 20°C)

    pH: 1.18 (1% solution)

  • Section 3 Body: 

    Type: Bactericide

    Solubility: Soluble (100% in water)

    pH: 3.2

    Microtox: >100% @ 0.1 - 0.5 L/m³

  • Section 3 Body: 

    Type: Potassium Phosphate

    Solubility: 187g/100g H20 @ 25°C

    pH: 10.2 - 10.7 (1% solution @ 25°C)

    Microtox: MTX @ 10kg/m³

  • Section 3 Body: 

    Type: Pine derivative

    Solubility: Insoluble

    Vapor Pressure (mmHg): <0.1 @ 20°C

    Vapor Density (air=1): >1

  • Section 3 Body: 

    Appearance: Light tan fibrous powder

    Specific Gravity: .613

  • Section 3 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 3 Body: 

    Type: Xanthan biopolymer

    Solubility: 100% soluble in water

    pH: 7.0 (1% solution)

    Microtox: >100% @ 6.0 kg/m³

  • Section 3 Body: 

    Type: Chemical compound

    Solubility: Soluble <0.1% (water)

    Microtox: 36% @ 14.0 kg/m³

  • Section 3 Body: 

    Appearance: White powder

    Specific Gravity: 2.7

    Bulk Density: 1365 kg/m³

    Particle Size Distribution: 87% passing 325 mesh

  • Section 3 Body: 

    Fe2O3: 92% (min)

    SiO2 + Al2O3: 4% (max)

  • Section 3 Body: 

    Type: Alcoholic blend in mineral oil

    Solubility: Insoluble in water

  • Section 3 Body: 

    Storage Precautions: Earth Pro Thermal 40 Cement is not hazardous. However, if product becomes wet through unforeseen circumstances, some heat will be given off due to hydration. Avoid excessively humid conditions. Store in a cool dry place.

    Handling Precautions: As product is mixed with water, some heat evolution will occur. Caution should be exercised to mix continually until ready to place the slurry in the dump-bail. Since Earth Pro Thermal 40 Cement is caustic in nature, it will cause severe burns to eyes and sensitive skin areas. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 3 Body: 

    Appearance: Greyish white powder

    Specific Gravity: 1.60 +/- 0.05 g/cm³

    Melting Point: >100°C

    Particle Size: Pass 20 mesh > 99.9%

  • Section 3 Body: 
    Temp. Density Working Time Setting Time

    Time to 500 psi

    (3.5 MPa)

    °C kg/m³ Hr Est. Hrs Hr:min
    100 1800 8-15 24 46:00
    110 1800 4-5 7 14:00
    120 1800 2.5-3 3.5 7:30
    130 1800 1.5-2 2.75 5:15
  • Section 3 Body: 

    The table below depicts the typical strength development for Earth Pro ResinBond Cement. Using proper mixing and measuring techniques, the typical slurry will remain fluid for 1-1.5 hours after mixing. This time also includes the amount of time required at surface to mix.

    Depth Temp Time (Hours)
    (m) (°C) 1 1.5 2 3 4 5 6 7 24 48
    400 15 Flows Flows Set, No Strength 0.0 0.4 2.1 3.5 6.3 12.6 16.8
    600 20 Flows Flows Set, No Strength 0.0 1.8 5.6 7.0 9.1 16.8 19.6
    750 25 Flows Flows Set, No Strength 0.0 0.7 2.8 9.8 11.9 15.4 17.5
    900 30 Flows Flows Set, No Strength 0.7 2.8 8.1 9.8 11.9 16.1 18.9
    1100 35 Flows Flows Set, No Strength 0.5 3.5 10.5 11.2 13.3 14.7 17.5
    1300 40 Flows Flows Set, No Strength 1.8 9.5 11.2 12.6 13.3 14.7 20.3
    1500 45 Flows Flows Set, No Strength 5.3 13.7 15.4 17.5 18.9 20.3 22.1
    1700 50 Flows Flows Set, No Strength 0.0 4.2 5.6 7.7 11.6 16.1 21.0
    1900 55 Flows Flows Set, No Strength 0.2 3.9 7.0 8.4 11.9 18.2 22.4
    2100 60 Flows Flows Set, No Strength 0.7 4.2 7.7 9.8 13.3 21.7 23.1

    Please note that shortly after this open time, the slurry begins the transition to the set state. In all cases, at 2 hours the slurry will no longer flow. This value does vary somewhat depending upon well depth and RB Catalyst loading, so always place the Earth Pro ResinBond Cement plug as quickly and as safely as possible.

    The proper amount of clean water, accurate measurement of RB Catalyst, and adequate mixing of the cement all lead to a successful job.

  • Section 3 Body: 

    Appearance: Grey-white powder

    Bulk Density: 0.694 m³/ton

  • Section 3 Body: 

    Appearance: Silver grey powder

    Specific Gravity: 2.7 (water=1)

    Surface Area: 0.34 m²/cm³

    Apparent Density: 1.0 g/cc

    200 Mesh Retention: Trace

    325 Mesh Retention: 11%

  • Section 3 Body: 

    Appearance: Brown to grey powder

    Specific Gravity: 4.2 - 4.4

    Melting Point: 1580°C

    200 Mesh Retention: 2%

    325 Mesh Retention: 17%

    Percentage Passing 6: 17%

    Moisture (ASTM D-280): 0.02%

    Bulk Density (ASTM C-110): Loose - 1730 kg/m³, Tapped - 2563 kg/m³

  • Section 3 Body: 

    Type: Inorganic acid

    Solubility: 4.7% w/w @ 20°C

    pH: 5.1 (1% w/v in demineralized water)

  • Section 3 Body: 

    Appearance: White pellet

    Bulk Density: 800-900 kg/m³

    Particle Size Distribution (Accumulated):

    Mesh Size USS #6 #16 #20
    Minimum % 0 40 85
    Maximum % 10 100 100


  • Section 3 Body: 

    Type: Blend

    Solubility: Soluble in water

  • Section 3 Body: 

    Appearance: White powder

    Bulk Density: 640-750 kg/m³

    Specific Gravity: 1.30

  • Section 3 Body: 

    Appearance: Tan colored powder

    Specific Gravity: 1.247 gm/cm³

    Surface Tension: 71 dynes/cm

  • Section 3 Body: 

    Type: Defoamer

    Solubility: Slightly soluble in water

    pH: 7.0

  • Section 3 Body: 

    Type: Modified alkyl sulphonate 100%

    pH: 8.0 - 11.4 (20% solution)

  • Section 3 Body: 

    Chemical Family: Galactomannan

    Solubility: Excellent solubility in water

    pH: 5.0 - 6.5

  • Section 3 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 1000L tote

  • Section 3 Body: 

    Gypsum: 88.8%

    Sulphur: 16.8%

    Calcium: 22.5%

  • Section 3 Body: 

    Reducing Sugars: <3%

    Sulfur: 7-8%

    Sodium: 8-9%

    Calcium: <0.1%

    Chloride: <0.15%

  • Section 3 Body: 

    Appearance: Tan granules

    Bulk Density: 840-900 kg/m³

  • Section 3 Body: 

    Appearance: Tan granules

    Bulk Density: 840-900 kg/m³

  • Section 3 Body: 

    Solubility: Partly soluble in water

    pH: 6.1 (1% w/w solution)

    Water Requirement: 0.85 m³/ton

    Yield: 1.23 m³/ton

    Density: 1500 kg/m³

  • Section 3 Body: 

    pH: 6.5 - 7.5

    Shell Properties

    • Silica: 55-65%
    • Alumina: 25-35%
    • Iron Oxide: <5%

    Gas Properties

    • Carbon Dioxide: 65-75%
    • Nitrogen: 25-35%
  • Section 3 Body: 

    Water Requirement: 40% w/w

    pH: 6.0 - 8.0 (10% solution)

  • Section 3 Body: 

    Type: Powder blend mixture

    Solubility: Soluble in water

    pH: Slightly basic (1% solution)

  • Section 3 Body: 

    Appearance: Tan colored

    Bulk Density: 0.61 m³/ton (1650 kg/m³)

    Composition: Silicone dioxide

    Specific Gravity: 2.65

  • Section 3 Body: 

    Potassium Chloride: 99.47%

    Chloride: 47.58%

    Sodium: 0.177%

    Sodium Chloride: 0.45%

    Moisture: 400 ppm

    Water Insolubles: 50 ppm

  • Section 3 Body: 

    Solubility: 36 gm/100 ml H2O @ 20

    Water Insolubles: 36 ppm

    Sodium Chloride: 99.7%

    Calcium Sulphate: .10%

    Calcium Chloride: .01%

    Magnesium Chloride: .09%

    Potassium Chloride: .10%

    Moisture: .04%

  • Section 3 Body: 

    Loss on Ignition: <6.0%

    pH: 6.0 - 9.0

    Silicon Dioxide: >85%

  • Section 3 Body: 

    Loss on Ignition: 1.5 - 2.2%

    pH: 7.0 - 7.6

    Silicon Dioxide/Magnesium Oxide: 5-10%

    Total Carbon: 1.75-2.25%

    Iron Oxide: 1.0-1.5%

    Aluminum Oxide: 0.5-1.5%

    Sulphur: 0.12%

    Chlorides: 0.09%

    Total Alkalies Available: 1.0-1.5%

  • Section 3 Body: 

    Type: Chemical compound

    Solubility: Soluble 18% @ 21°C

    Sodium Carbonate: 99.5% min

    Sodium: 58.2% min

    Calcium: 150 ppm (max)

    Magnesium: 50 ppm (max)

    Sodium Sulphate: 400 ppm (max)

    Iron: 500 ppm (max)

    Moisture: 5 ppm (max)

    Water Insolubles: .15% (max) - 500 ppm (max)

  • Section 3 Body: 

    Solubility: Soluble in water

    pH: 6.0 - 7.0 (in fresh water)

  • Section 3 Body: 

    Solubility: 15.9% @ 20°C

    pH: 8.3 (1% solution)

    Sodium Sulphate: 99.1%

    Calcium Sulphate: 0.14%

    Magnesium Sulphate: 0.50%

    Sodium Carbonate: 0.01%

    Sodium Chloride: 0.20%

    Sodium Bicarbonate: 0.03%

    Water Insolubles: 0.02%

  • Section 3 Body: 

    Type: Surfactant/alcohol blend

    Solubility: Soluble in water and brine (not oil)

  • Section 3 Body: 

    Type: Buffer

    pH: 12.8

  • Section 3 Body: 

    Type: Clay stabilizer

    pH: 1.56

  • Section 3 Body: 

    Type: Crosslinker

    pH: 11.7

  • Section 3 Body: 

    Appearance: Light tan - grey powder

    Relative Density (water=1): 2.45-2.55

  • Section 3 Body: 

    Type: Weighting material

    Solubility: Insoluble

    pH: 7.0 - 9.5

  • Section 3 Body: 

    Appearance: White-grey-buff powder

    Specific Gravity: 2.7 - 2.9

    Melting Point: 2570°C

    Flash Point: Not flammable

    Grind Size: 96% passing 325 mesh

  • Section 3 Body: 

    Appearance: Light tan to grey powder

    Specific Gravity: 2.45 - 2.55

    Melting Point: >450°C

  • Section 3 Body: 

    Appearance: Pale grey to buff powder or granules

    Specific Gravity: 2.6

  • Section 3 Body: 

    Slurry Density: 9.4-9.5 lb/gal

    Dry Bulk Density: 55-60 lb/ft³

    Thermal Conductivity: .42 BTU/hr-ft-°F

  • Section 3 Body: 

    Bagged material should be screened of fines before placing in hole. Material should be poured slowly down hole to prevent bridging or binding. Product is not recommended for use in depths exceeding 100 ft.

  • Section 3 Body: 

    Solubility: Not soluble

  • Section 3 Body: 

    Viscosity: cSt at 40°C (104°F) is 84.6, cSt at 100°C (212°F) is 7.8, SUS at 40°C (104°C) is 392, SUS at 100°C (212°F) is 52

  • Section 3 Body: 

    Fluid Type: Petroleum 

    Thickener: Aluminum Stearate 

    Oil Separation, Wt. % Loss @ 100°C: <3.0% 

    Water Spray-Off (ASTM D-4049): <10% 

    NLGI Grade: 2 

    Copper Strip Corrosion (ASTM D-4048): 1A

  • Section 3 Body: 

    Appearance: Brown liquid 

    Boiling Point: 100°C

  • Section 3 Body: 

    WHMIS: Controlled (see MSDS

    TDG: Not regulated 

    Packaging: 50lb sack / bulk

  • Section 3 Body: 

    Appearance: Light tan to grey powder/granules 

    Specific Gravity: 2.45-2.55 

    Melting Point: 1450°C

    Bulk Density: 49-55 lb/ft³

  • Section 3 Body: 

    Earth Pro BioFoam can be added directly to make-up water with mild agitation to ensure even mixing or inject directly into water line with a chemical pimp capable of metering proper treatment levels. If polymers are to be used, premix them in the make up water. Utilize eye/skin protection and dust mask when mixing.

  • Section 3 Body: 

    Mix Earth Pro Claysperse L after mixing regular drilling additives such as viscosifying polymers. Add in batches at the suction side of the mud tank to create a sweep effect in the wellbore.

    Earth Pro Claysperse L will thin back most drilling fluids and is most effective when mixed and pumped in only water or in polymer systems. Effectiveness will be reduced in bentonite slurries. When mixing in whole mud do so after the polymer has hydrated.

    Under normal drilling conditions if a sticky clay seam is encountered add 2-3 L/m³ of fluid. If a mud ring is suspected add 2 visc cups of Earth Pro Claysperse L directly into the tool joint when making a connection.

    In a recycled closed loop system if used as a thinner add sparingly at the front end of the system and check viscosity in the suction end
    regularly so as to not over treat.

  • Section 3 Body: 

    Earth Pro CombiVis L should be mixed at a point of high agitation in the tank to promote even dispersion and hydration. Shake product before opening. Product may have natural separation/settling in liquid form.

  • Section 3 Body: 

    Earth Pro ProPac D is a dry polymer and should be added slowly through a high shear mixer to prevent lumps or fish eyes. It should not be added before bentonite since the yielded Earth Pro ProPac D will prevent the bentonite from hydrating.

  • Section 3 Body: 

    Appearance: Off white to tan powder

    Concentration: 2-3kg (normal conditions), 3-4kg (sand and gravel)

  • Section 3 Body: 

    Earth Pro HydraVis L should be mixed at a point of high agitation in the tank to promote even dispersion and hydration. Shake product before opening. Product may have natural separation / settling in liquid form.

  • Section 3 Body: 

    Appearance: Granules/Chips 

    Physical State: Solid

    Specific Gravity: 0.5-0.8 g/ml

    Melting Point: >390°F

  • Section 3 Body: 

    Appearance: Yellow and white granules

    Specific Gravity: 2.6

  • Section 3 Body: 

    Appearance: Black powder

  • Section 3 Body: 

    Appearance: White granular powder

    Granule Density: 0.5

    Specific Gravity: 1.5

    Required Time: 30 mins for 50% enlargement, 90 mins for 100% enlargement

  • Section 3 Body: 

    Earth Pro SynVis D requires minimal shearing to yield very consistently and quickly compared to semi-synthetic or natural polymers.

  • Section 3 Body: 

    Appearance: White to off white viscous liquid

    Specific Gravity: 1.1

  • Section 3 Body: 

    Appearance: Yellow liquid

    Specific Gravity: 1.04

  • Section 3 Body: 

    Appearance: Milky, viscous liquid

    Specific Gravity: 1.07

  • Section 3 Body: 

    Appearance: Free-flowing off-white powder

    Specific Gravity: 0.68

  • Section 3 Body: 

    Appearance: Black solid

    Specific Gravity: 1.04 - 1.08

    Flash Point: 310°C

  • Section 3 Body: 

    Appearance: Milky viscous liquid

    Specific Gravity: 1.07

  • Section 3 Body: 

    Appearance: Grey to light brown granular solid

    Density: 1.5

  • Section 3 Body: 

    Solubility: Insoluble

    pH: 6.0 - 8.0 (5 g/L)

  • Section 3 Body: 

    Earth Pro Claymean L is 100% soluble in water and only requires that it be mixed in a manner that allows it to disperse evenly so any kind of agitation is sufficient for proper mixing.

  • Section 3 Body: 

    If being mixed as a standalone product or in combination with DR-133 in an open system it is easiest to place the container over the tank at a place of agitation and poke a small hole near the bottom and open the top to allow for gravity drainage. The hole size can be fine tuned to achieve consistent desirable viscosity. Ensure that each jug is shaken before using as the product may settle over time.

  • Section 3 Body: 

    Appearance: Opaque yellowish-beige liquid

    Specific Gravity: 0.990

    Flash Point: >125°C

  • Section 3 Body: 

    Type: Synthetic polymer blend

    Solubility: Partially soluble in water

  • Section 3 Body: 

    Appearance: Clear to hazy light amber liquid

    Specific Gravity: 1.16 - 1.18

    Flash Point: >100°C

  • Section 3 Body: 

    Solubility: Forms a gel in water

    pH: 4.0 - 9.0 (5 g/L)

  • Section 3 Body: 

    Solubility: Soluble in water

    pH: 6.5 - 7.5 (1% solution)

  • Section 3 Body: 

    Fluid Type: Petroleum

    Thickener: Calcium complex

    Oil Separation, Wt. % Loss @ 100°C: <3.0%

    NLGI Grade: 1

    Copper Strip Corrosion (ASTM D-4048): 1A, typical

  • Section 3 Body: 

    Type: Bactericide

    Solubility: Soluble in water

    pH: 6.0 - 7.0 (1% @ 20°C)

  • Section 3 Body: 

    Modified Starch mixes readily and may be added to a mud system through the hopper at 10-15 minutes per bag. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 3 Body: 

    Appearance: Opaque liquid

    Specific Gravity: 1.02 - 1.06

    Viscosity: 500 - 1500 cps

    Pour Point: 5°F (-15°C)

    Flash Point: >200°F (93°C)

  • Section 3 Body: 

    Type: Polyacrylamide

    Solubility: Dispersible-Soluble

    pH: 6.5 - 7.5 (1% solution)

    Microtox: 20% @ 3.0 L/m³

  • Section 3 Body: 

    Solubility: 21% in water

    pH: 1.18

  • Section 3 Body: 

    Solubility: 21% soluble in water

    pH: 1.18

  • Section 3 Body: 

    Vapor Pressure: 5.700 @ 68°F

    Solubility: 100% in water

    pH: 1.0 - 2.0

  • Section 3 Body: 

    Volatile Percentage: 34%

    Vapor Density: 1.0

    Solubility: 100% in water

    pH: 7.0

  • Section 3 Body: 

    Volatile Percentage: 34%

    Solubility: 100% in water

    pH: 2.3

  • Section 3 Body: 

    Vapor Density: 1.0

    Solubility: 100% in water

    pH: 2.4 - 3.4

  • Section 3 Body: 

    Solubility: 33% @ 0°C

    pH: 8.6 (7.5% solution)

  • Section 3 Body: 

    Grease Carrier: Aluminum complex

    Oil Separation, Wt. % Loss: Max 3.0

    Water Spray-Off: <8.0%

    NLGI Grade: 1.5

    Copper Strip Corrosion: 1A

  • Section 3 Body: 

    Shell 4 Ball Weld Point, kgf: 500

    Copper Strip Corrosion: 1A

    Oil Separation Wt. % Loss @ 100°C: <5.0%

    NLGI Grade: 2

  • Section 3 Body: 

    Solubility: 18% by weight of water @ 21°C

    Sodium Carbonate: 99.5% min

    Sodium: 58.2% min

    Calcium: 150 ppm (max)

    Magnesium: 50 ppm (max)

    Sodium Sulphate: 400 ppm (max)

    Sodium Chloride: 500 ppm (max)

    Iron: 5 ppm (max)

    Moisture: .15% max

    Water Insolubles: 500 ppm (max)

  • Section 3 Body: 

    Type: Anhydrous crystals

    Solubility: 60% @ 20°C (162gms/100mls of H2O)

    pH: 0.1 N solution: 2.2 (approx.)

    Citric Acid 99.5% Water 1.0% max
    Sulphated Ash 0.1% max Calcium 200 mg/L max
    Chloride 50 mg/L max Iron 50 mg/L max
    Oxalate 350 mg/L max Sulphate 150 mg/L max
    Arsenic 3 mg/L max Heavy Metals 10 mg/L max
  • Section 3 Body: 

    pH: 7.0 - 8.0

    Viscosity: 20 mPa·s (20°C)

    Electrical Conductivity: 30,000 μS/cm

  • Section 3 Body: 

    Type: Polyacrylamide

    Shelf Life: 6 months when stored @ 5-30°C

  • Section 3 Body: 

    Type: Polyacrylamide

    Shelf Life: 6 months when stored @ 5-30°C

  • Section 3 Body: 

    Type: Polyacrylamide

    Shelf Life: 6 months when stored @ 5-30°C

  • Section 3 Body: 

    Type: Polyacrylamide

    Shelf Life: 6 months when stored @ 5-30°C

  • Section 3 Body: 
    Product Number Product Name
    42187 Piston Rod 5” x 6” API PPGD 25FXG183
    47224 Chrome Piston Rod 5” x 8” and 5.5” x 8”
    46586 Rod with Nut 4.5” x 5” GD-1
    27018 Rod Packaging 2.5” x 1.5”
    47313 Rod Packaging OEM EMS D-375 PPNO07915040
    47322 Rod Packaging for D-300

     

  • Section 3 Body: 
    Product Number Size Product Description
    27000 4” x 1” Pitless Adapter
    27004 4.5” x 1.25” Pitless Adapter
    27006 5” x 1” Pitless Adapter
    27010 6” x 1” Pitless Adapter
  • Section 3 Body: 
    Product Number Product Name Packaging
    27071 Silica Sand 20/40 50lb
  • Section 3 Body: 
    Product Number Product Name Packaging
    47161 Well Gravel 3/8” 2800lb
    49568 Silica Sand 40/70 Geothermal 50lb
    44269 Sand #40 Bodyshot 99% Silica 50lb
  • Section 3 Body: 
    Product Number Size SDR / PSI
    47479 3/4" X 600'  11 SDR
    48834 1" X 12'  11 SDR
    49046 1" X 200'  75 PSI
    49047 1" X 300'  75 PSI
    46910 1" X 800' 11 SDR
    46284 1-1/4" X 500' 11 SDR
    47478 1-1/4" X 640' 11 SDR
    49529 1-1/4" X 650' 11 SDR
    46715 1-1/4" X 1500' 100 PSI
    48833 1-1/2" X 12'  11 SDR
    46716 1-1/2" X 250' 100 PSI
    46985 2" X 20' 11 SDR
    47069 2" X 50' 11 SDR
    48777 2" X 200'  100 PSI
    49307 2" X 250' 11 SDR
    49567 2" X 500'  11 SDR
    47384 2" X 500' 75 PSI
    47385 2" X 500' 100 PSI
    47450 2" X 500'  100 PSI / 17 SDR
    48975 2" X 1000'  160 PSI
    47122 3" X 40' 13.5 SDR
    49282 3" X 50'  13.5 SDR
    46771 3" X 500' 13.5 SDR
  • Section 3 Body: 
    Product Number Product Description
    47099 QC Slope Indicator Top Cap 70mm (2.75”)
    47100 QC Slope Indicator Bottom Cap 70mm (2.75”)
    48902 QC Slope Indicator Top Cap 85mm (3.34”)
  • Section 3 Body: 
    Product Number Size Product Description
    37099 2” Shelby Tube Plastic Cap #090367-43
    30533 2.5” Shelby Tube Plastic Cap #090367-49
    30534 3” Shelby Tube Plastic Cap #090367-55
  • Section 3 Body: 
    Product Number Size TPI Description
    41084 2” x 5’ 2 .010” Slotted
    41085 2” x 5’ 2 .020” Slotted
    41090 2” x 5’ 2  
    41091 2” x 10’ 2  .020” Slotted
    40187 2” x 10’ 2  
    47355 4” x 10’ 2 .010” Slotted
    49241 5” x 20’ 5  
    49242 5” x 20’ 5  
  • Section 3 Body: 

    Product Number

    Size

    Description

    37743

    8”

     

    38493

    6.25”

     

    39519

    5”

    Cast Iron

    39520

    6”

    Cast Iron

    43593

    6.25”

    Cast Iron

    44080

    3.25”

    Plastic

  • Section 3 Body: 

    Factors that affect flow rate include such parameters as the depth of submergence of the foot valve, tubing diameter, well casing diameter, the length of pump stroke and the speed of oscillation of the pump. 

    Obviously, the speed of oscillation is the primary factor in imparting momentum to the water column in the pumps tubing. Generally a pumping rate of 100 to 180 strokes per minute is recommended. The recommended stroke length is 4 to 6 inches with a longer stroke performing better in deeper piezometers. 

    Greater submergence of the foot valve increases the pressure differential, (the pressure difference between the water within the tubing and the head pressure outside the valve) that is created at the end of the upward pump stroke. Increasing the pressure differential increase the rate of water inflow through the valve at the end of the upward stroke thereby increasing the flow rate. 

    Another factor affecting the flow rate with the inertial pump is the size of the annular gap between the Inertial Pump tubing and the ID of the well casing. When the Inertial Pump is operating the flexible tubing will tend to wobble from side to side within the well casing. This wobble results in some of the up and down movement applied at surface to the tubing not reaching the depth where the valve is located. For this reason the stiffer High Density Polyethylene tubing is usually preferred in deeper monitoring wells (depth in excess of 60 – 70 feet). The Inertial Pump performs best in smaller diameter piezometers (4” or less). 

    As a general guide, in most 2” monitoring wells, the High Flow System D-32 will usually produce a flow rate of about 1 to 3 gallon per minute given 20 to 30 feet of valve submergence. The High Flow System has a substantial lift capacity in 2” diameter piezometers. Some customers have reported lifts approaching 300 feet.

  • Section 3 Body: 

    The Performance Chart shown displays the performance capabilities of the Low Flow System. This chart is intended to assist you with the selection of the most suitable system for your specific site.

    Please note that the ratings have been calculated by actual field testing in a variety of well conditions and therefore may seem somewhat conservative in value.

  • Section 3 Body: 

    The Performance Chart shown displays the performance capabilities of the Micro Flow System. This chart is intended to assist you with the selection of the most suitable system for your specific site.

    Please note that the ratings have been calculated by actual field testing in a variety of well conditions and therefore may seem somewhat conservative in value.

  • Section 3 Body: 

    Factors that affect flow rate include such parameters as the depth of submergence of the foot valve, tubing diameter, well casing diameter, the length of pump stroke and the speed of oscillation of the pump.

    Obviously, the speed of oscillation is the primary factor in imparting momentum to the water column in the pump's tubing. Generally a pumping rate of 100 to 180 strokes per minute is recommended. The recommended stroke length is 4 to 6 inches, with a longer stroke performing better in deeper piezometers.

    Greater submergence of the foot valve increases the pressure differential (the pressure difference between the water within the tubing and the head pressure outside the valve) that is created at the end of the upward pump stroke. Increasing the pressure differential increases the rate of water inflow through the valve at the end of the upward stroke, thereby increasing the flow rate.

    Another factor affecting the flow rate with the inertial pump is size of the annular gap between the inertial pump tubing and the ID of the well casing. When the inertial pump is operating, the flexible tubing will tend to wobble from side to side within the well casing. This wobble results in some of the up and down movement applied at surface to the tubing not reaching the depth where the valve is located. For this reason, the stiffer High Density Polyethylene tubing is usually preferred in deeper monitoring wells (depth in excess of 60 – 70 feet). The inertial pump performs best in smaller diameter piezometers (4" or less).

  • Section 3 Body: 

    The recommended method for developing a monitoring well with the inertial pump and surge block is to begin the development process with the surge block near the top of the well screen. Operate the pump with the surge block in this position until the turbidity level of the water being delivered from the pump decreases to an acceptable level. Once this level is reached then the surge block is lowered in the well screen one to two feet and the process is repeated.

    Developing wells in this manner is one of the best methods, often resulting in turbidity levels below 10 NTUs.

  • Section 3 Body: 
    • No-purge device provides larger sample volume, a full 1 liter, in 2" and larger wells
    • Armored HydraSleeves have a protective outer sleeve that more than doubles the wall thickness
    • Armored HydraSleeve could be useful in steel wells, open boreholes, or anywhere a HydraSleeve could come in contact with jagged edges or increased potential for abrasion
    • Disposable
    • Fits in 2" Schedule 40 and larger wells (will not fit in 2" Schedule 80 PVC)
    • Standard material = virgin 7 mil PE
    • Absolute maximum volume obtainable without spilling = 1.1 liters
    • Requires the use of 16 oz. Bottom Weight
    • Layflat = 2.75"W x 38"L
    • Filled Diameter = 1.75"
    • Filled Volume = ~1000 mL
    • Fill Stroke = 38"
  • Section 3 Body: 
    • Provides comparable, formation quality samples of ALL parameters from 3" and larger wells for both short and long-term monitoring.
    • Protective outer sleeve more than doubles wall thickness
    • Useful in steel wells, open boreholes, or anywhere a HydraSleeve could come in contact with jagged edges or increased potential for abrasion
    • Disposable
    • Fits in 3" Schedule 40 and larger wells
    • Standard material = virgin 7 mil PE. Tensile strength 25-35 lb
    • Absolute maximum volume obtainable without spilling 1.48 liters
    • Requires the use of 16 oz. Bottom Weight
    • Layflat = 4"W x 30"L
    • Filled Diameter = 2.6"
    • Filled Volume = ~1400 mL
    • Fill Stroke = 30"
  • Section 3 Body: 
    • Special 2-piece PVC Collar for use with SuperSleeve when Top Weight for compression into the bottom of the well is not needed.
    • Similar to SuperSleeve top weight, the SuperSleeves thread between the top portion and locking ring and are held in place by the threads.
    • Consists of a top threaded portion, and a threaded locking ring. 
    • Spring Clip tether attachment included
    • To be used in conjunction with bottom weight (8-ounce bottom weight recommended)
    • Sand weight will not work because of the lack of density in water.
    • Length: 3"
    • OD: 1.9" (fits in 2" schedule 40 well & larger)
  • Section 3 Body: 
    • Fits in 2" Schedule 40 and larger wells
    • Standard material = stainless steel
    • Can be used for all 2-inch HydraSleeves and 4-inch HydraSleeves
    • Ideal for use with the composite samplers or in deep or difficult wells with obstacles, to effectively pull the HydraSleeve down with more force than the other lighter weights.
    • Dimensions:  0.75" OD x 8" long
  • Section 3 Body: 

    The medium turbidity FMT-45 has all of the great features of the FHT-45, but with a reduced surface area at 300 sq. cm. These filters provide an economical alternative for lower turbidity sampling, when the highest possible capacity is not required.

    All Inline Disposable Micron Filters are pre-rinsed with one liter of de-ionized water to ensure purity, and are now certified to rinse clean. Independent ICP/MS analysis proves it.

  • Section 3 Body: 

    The heavy duty Kwik Klamp 3 is designed to hold 6" PVC pipe. This Kwik Klamp 3 can also hold 5" pipe with an additional jaw set. The Kwik Klamp 3 is very similar to the Kwik Klamp 2 which is for pipe sizes 2-1/2" through 4". The Kwik Klamp has been used worldwide by environmental drillers, pump installers, well serviceman, and water well drillers.

    • Main body is constructed of 2" and 2-1/2" 1/4" wall steel tube.
    • Easy to operate, over center locking of jaws when downward pressure is applied to a 19" long lever handle.
    • 1/2" Safety pin used to prevent accidental unclamping.
    • Kwik Klamp 3 allows workers to bring pipe or drill joint up to an easy working level.
    • The tool weighs only 37 lbs. and is 20" long x 7-1/2" wide.
    • Jaws are equipped with 20 carbide tipped grippers (3/8-16x1/2).
    • Excellent holding capability, with load tests done over 7,000 lbs.
    • Designed to hold 6" PVC or HDPE pipe.
    • Kwik Klamp is one of the safest, time saving tools you will ever own.
    Product Number Description
    46918 Kwik Klamp 3 for 6” PVC Pipe Only
    49177 Set of Kwik Klamp 3 Jaw Pads & Bolts for 5” PVC Pipe
  • Section 3 Body: 

    Margo Plug Conduit

    Product Number Size
    39550 1” SCH10 per foot
    30146 1” EMT per foot
    30147 1.25” EMT per foot
    30148 2.5” EMT per foot

     

    Margo Plug Bushing

    Product Number Size
    39552 1” x .5”
    30149 1” x 1.5”
    30150 1.25” x 1”

             

    Margo Plug Pipe

    Product Number Size Schedule
    30239 / 39551 .5” 40
    30240 1” 40
    30241 1.5” 80

     

    Margo Plug Caps

    Product Number Size
    30214 / 38974 .5”
    30215 / 39005 1”

     

    Margo Plug Washers

    Product Number Size GA
    30228 1.125” x .875” 11
    30230 1.25” x .875” 12
    30229 1.375” x .875” 11
    30236 1.625” x .875” 11
    30231 1.75” x .875” 11
    30216 2.125” x 1.375” 11
    30232 2.25” x 1.375” 11
    39450 2.625” x 1.375” 11
    30234 2.875” x 1.375” 11
    39384 3.375” x 2.5” 11
    30235 3.625” x 2.5” 11
    39372 3.875” x 2.5” 10

     

    Margo Plug Nuts

    Product Number Size
    30227 .875”
    30238 1”
    30237 1.375”
    30233 2”

     

    Margo Plug Packer

    Product Number Size
    30218 1.125” x .875” x 3” Long
    30219 1.25” x .875” x 3” Long
    30217 1.375” x .875” x 3” Long
    30220 1.625” x .875” x 3” Long
    30226 1.75” x .875” x 3” Long
    30221 1.875” x .875” x 3” Long
    37078 2.125” x 1.375” x 3” Long
    30222 2.25” x 1.375” x 3” Long
    30223 2.375” x 1.375” x 3” Long
    39451 2.625” x 1.375” x 3” Long
    30224 2.875” x 1.375” x 3” Long
    30225 3.75” x 2.5” x 3” Long

     

  • Section 3 Body: 

    Appearance: Clear liquid

    Specific Gravity: 0.90

    Pour Point: >-20°C

    Flash Point: >100°C (TCC)

  • Section 3 Body: 

    High Quality Materials

    Electric resistance welded alloy steel tubing from American and Japanese suppliers, ensures a uniform wall thickness for greater joint integrity, balanced rotation and even wear.

    Di-Corp drill rod is processed with an additional stress relief heat treat, to eliminate bent rods.

    A final quench and temper heat treat process is performed before machining the thread to strengthen the rod joint for greater torsional and tensile properties.

    Precision Machined Threads

    Finished threads are precision machined and not distorted by any other process, providing a superior joint fit with less chance of the joint pulling apart.

  • Section 3 Body: 

    High Quality Materials

    Electric resistance welded alloy steel tubing from American and Japanese suppliers, ensures a uniform wall thickness for greater joint integrity, balanced rotation and even wear.

    Di-Corp drill rod is processed with an additional stress relief heat treat, to eliminate bent rods.

    A final quench and temper heat treat process is performed before machining the thread to strengthen the rod joint for greater torsional and tensile properties.

    Precision Machined Threads

    • Less bulging and breaking
    • Complete line of accessory products are manufactured with the same precision
    • Finished threads are precision machined and not distorted by any other process, providing a superior joint fit with less chance of the joint pulling apart

    WARNING: All threads are precision machined and mixing Di-Corp rods with other manufacturers’ rods, adaptors, or threaded accessories is not recommended. Failure to adhere to this recommendation may cause premature failure, an inspection may result in the warranty becoming void.

  • Section 3 Body: 

    High Quality Materials

    Light weight wireline drill rod is manufactured using high quality alloy steel tubing with same mechanical properties as parallel wall. This allows for a thinner midbody to increase overall flexibility.

    Di-Corp drill rod is processed with an additional stress relief heat treat, to eliminate bent rods. A final quench and temper heat treat process is performed before machining the thread to strengthen the rod joint for greater torsional and tensile properties.

    Precision Machined Threads

    Available in standard wireline (WL) and deep hole (D) thread forms, along with a complete line of accessory products that are manufactured with the same precision.

    Finished threads are precision machined and not distorted by any other process, providing a superior joint fit with less chance of the joint pulling apart.

  • Section 3 Body: 
    Product Number Size Schedule
    49468 1/2" 80
    37792 1" 40
    38573 2" 40
    48769 2" 80
    41713 4" 80
  • Section 3 Body: 
    • A/C Power Cord, 230 Volt
  • Section 3 Body: 
    • Write programs based on time, temperature and shear rates
    • Multiple calibration points: low and high shear rates
    • Computer automatically stores data
    • Multiple rheological programs available
  • Section 3 Body: 
    • Fuse, 5 Amp, 5 mm × 20 mm Qty.: 5
    • Brush; Graduate ½” × 8” Qty.: 1
    • Graduated Cylinder; 10 mL × 2/10 mL Qty.:1 
    • Lid for 10-mL Sample Cup Qty.:1
    • Spatula Qty.:1 
    • Corkscrew Qty.:1 
    • Steel Wool; Grade 000. Extra Fine; Package of 4 Pads Qty.:16
    • Pipe Cleaner Qty.:6
    • High-Temperature Thread Lubricant; 4-oz. Qty.:1 Tube
    • Wetting Agent Qty.:1
  • Section 3 Body: 
    • Fuse, 5 Amp, 5 mm × 20 mm Qty.: 5
    • Brush; Graduate ½” × 8” Qty.: 1
    • Graduated Cylinder; 10 mL × 2/10 mL Qty.:1 
    • Lid for 10-mL Sample Cup Qty.:1 
    • Spatula Qty.:1 
    • Corkscrew Qty.:1 
    • Steel Wool; Grade 000. Extra Fine; Package of 4 Pads Qty.:16
    • Pipe Cleaner Qty.:6
    • High-Temperature Thread Lubricant; 4-oz. Qty.:1 Tube
    • Wetting Agent Qty.:1
  • Section 3 Body: 

    20 mL Receiver Tube for Retort, 2-scales, 0-100% × 0.1, 0-20 mL × 0.1 mL, with certificate

  • Section 3 Body: 

    50 mL Receiver Tube for Retort, 2-scales, 0-100% × 0.1, 0-50 mL × 0.1 mL, with certificate

  • Section 3 Body: 

    50 mL Receiver Tube for Retort, 2-scales, 0-100% × 0.1, 0-50 mL × 0.1 mL, with certificate

  • Section 3 Body: 
    • Interval Timer
  • Section 3 Body: 
    • Single-Capped, For Filter Paper
    • Double-Capped, For Cement Screens
    • Single-Capped, for Cement Screens
    • Single-Capped, for Ceramic Disks
    • Double-Capped, for Ceramic Disks
    • HTHP Filter Press Cell with Threaded Caps, 175 mL, Drilling Fluids
    • HTHP Filter Press Cell with Threaded Caps, 175 mL, Cement
  • Section 3 Body: 
    • 4 - Roller Oven with Redundant Heat Control (115 Volt)
    • 4 - Roller Oven with Redundant Heat Control (230 Volt)
    • Aging Cell, Stainless Steel Grade 303, 260 mL, Pressurized
    • Aging Cell, Stainless Steel Grade 303, 500 mL, Pressurized
    • Aging Cell, Stainless Steel Grade 316, 500 mL, Pressurized
    • Corrosion Test Cell, Stainless Steel Grade 303, 500 mL
    • O-ring for Outside of Aging Cell, Viton
    • CO2 Pressuring Assembly
    • Test Cell Removal and Carrying Tool
  • Section 3 Body: 
    • 4 - Roller Oven with Redundant Heat Control (115 Volt)
    • 5 - Roller Oven with Redundant Heat Control (230 Volt)
    • Aging Cell, Stainless Steel Grade 303, 260 mL, Pressurized
    • Aging Cell, Stainless Steel Grade 303, 500 mL, Pressurized
    • Aging Cell, Stainless Steel Grade 316, 500 mL, Pressurized
    • Corrosion Test Cell, Stainless Steel Grade 303, 500 mL
    • O-ring for Outside of Aging Cell, Viton
    • CO2 Pressuring Assembly
    • Test Cell Removal and Carrying Tool
  • Section 3 Body: 
    • 12-Volt Adapter is available
  • Section 3 Body: 
    • Cup for Thermocups, Stainless Steel
  • Section 3 Body: 
    • Padded Transport Case
    • Grinding Compound, Silicon Carbide, Abrasive Paste, Grit 280, Fine, 16 oz can
    • Grinding Compound, Silicon Carbide, Abrasive Paste , Grit 120, Coarse, 16 oz can
    • Disposable Latex gloves
    • Deionized Water 1 gal (3.785 L)
    • Acetone UN1090, 16 oz (500 mL)
  • Section 3 Body: 
    • Air supply of 100 PSI
    • Cooling water at 40 PSI
    • 230 Volt, 50/60 Hz, electrical power supply
  • Section 3 Body: 
    • Power: 100 - 240 Volt, 50 - 60 Hz, 2 Amp
    • Computer
      • Windows XP or higher
      • RS-232 Serial Port (or Serial to USB Adapter)
      • Minimum Screen Resolution: 1280 × 680
  • Section 3 Body: 
    • Power: 100 - 240 Volt, 50 - 60 Hz, 2 Amp
    • Computer
      • Windows XP or higher
      • RS-232 Serial Port (or Serial to USB Adapter)
      • Minimum Screen Resolution: 1280 × 680
  • Section 3 Body: 
    • Water supply and drain for cooling
    • 120 Volt, 50 / 60 Hz, 4.4 KVA power source
    • 220 Volt, 50 / 60 Hz, 2.2 KVA power source
  • Section 3 Body: 
    • Air / Nitrogen supply (100 - 120 PSI)
    • Water supply for cooling (40 PSI)
    • Water Drain
    • 230-Volt, 50 / 60 Hz, 25-Amp electrical power supply
  • Section 3 Body: 
    • Air / Nitrogen supply (100 - 120 PSI)
    • Water supply for cooling (40 PSI)
    • Water Drain
    • 230-Volt, 50 / 60 Hz, 25-Amp electrical power supply
  • Section 3 Body: 
    • Nitrogen Cylinder, 21” × 7”, Right-hand Thread (shipped empty)
    • Safety Shield
    • HTHP Cell Assembly, Double -capped, HTHP, 500 mL, for Ceramic Disks, 2000 PSI
    • HTHP Cell Cap Puller
    • Test Cell Removal and Carrying Tool
    • HTHP Pressure Relief Tool
    • Safety Clamp for HTHP Fluid Loss Cells
  • Section 3 Body: 
    • Maximum press capacity: 40,000 lbf.
    • Maximum Pressure: 10,000 PSI (based on a 2” cement cube with surface area of 4 in 2)
    • Minimum press threshold: 1,000 lbf.
    • Minimum Pressure: 250 PSI (based on a 2” cement cube with surface area of 4 in 2)
    • Loading rates variable from 250 to 40,000 lbf/min. (increments of 250)
    • Size: 23” W × 23” D × 26.5” H (58 × 58 × 67 cm)
    • Weight: 225 lb. (102 kg)
  • Section 3 Body: 

    Inclination: +/- 0.15°

    Gravity highside: +/- 0.20°

    Magnetic toolface: +/- 0.35°

    Azimuth: +/- 0.35°

  • Section 3 Body: 

    Inclination: +/- 0.15°

    Gravity highside: +/- 0.2°

    Gyro toolface: +/- 0.2°

    Azimuth: +/- 0.5°

    Position: <0.5% (5m/1000m)

  • Section 3 Body: 

    Inclination: +/- 0.15°

    Gravity highside: +/- 0.2°

    Gyro toolface: +/- 0.2°

    Azimuth: +/- 0.5°

    Position: < 0.5% (5 m /1000 m - depending on borehole conditions and survey procedure)

  • Section 3 Body: 

    Solubility: Soluble, gel formation

    pH: 7.0 - 10.0 (1% solution)

    Ignition Temperature: 360°C

    Lower Explosion Limit: 60 g/m³

  • Section 3 Body: 

    Solubility: Soluble, gel formation

    pH: 7.0 - 10.0 (1% solution)

    Ignition Temperature: 360°C

    Lower Explosion Limit: 60 g/m³

  • Section 3 Body: 
    • 4’ x 8’ (1.22 x 2.44 m)
    • 3’ x 8’ (0.19 x 2.44 m)
    • 2’ x 8’ (0.61 x 2.44 m)
    • 2’ x 6’ (0.61 x 1.83 m)
    • 2’ x 4’ (0.61 x 1.22 m)
  • Section 3 Body: 

    Dispose of contaminated Oil Sorbent Mats in accordance with local and provincial environmental regulations. Oil Sorbent Mats can be incinerated to less than 0.020/0 ash.

  • Section 3 Body: 

    Appearance: White granules

    Bulk Density: 1089 kg/m³

    Particle Size: 841-212 microns (#20-#65 mesh)

  • Section 3 Body: 

    Solubility: 100% in water

    pH: 12.5

    Sodium Oxide: 8.60- 9.20% (w/w)

    Sodium Dioxide: 28.00 - 29.40% (w/w)

  • Section 3 Body: 

    Specific Gravity: 2.5 g/mL

    Bulk Density Non-Compacted: 53 lbs/ft³

    Bulk Density Compacted: 72 lbs/ft³

    200 Mesh Passing: 70% min

  • Section 3 Body: 

    Silicon Dioxide: min 98%

    Water Solubility: max 0.5%

    Particle Size Distribution (% Retained):

    • 100 mesh, Max: 2
    • 200 mesh, Max: 6
    • 325 mesh, Max: 5
    • Pan, Min: 74
  • Section 3 Body: 

    Calcium Chloride: 77% min

    Sodium Chloride: 6.0% max

    Calcium Hydroxide: 0.35% max

    Magnesium Chloride: 0.5% max

    Water Insoluble: 0.2% max

  • Section 3 Body: 

    Enviroplug Grout can be mixed and placed using most available pumping equipment. Although paddle type mixers and positive displacement pumps work best, mixing can also be done through re-circulating systems.

    Maximum performance is achieved at a ratio of 1 bag to 14 gallons of water (30% solids). Since pumps such as double diaphragm or gear pumps may not produce enough pressure to place highly viscous mixtures, the ratio can be adjusted to 1 bag per 16 gallons of water and still achieve a good grout set.

    As Enviroplug Grout is added to the make-up water, a pan-cake batter consistency is generated. Pumping at this time is recommended as it minimizes migration into formations and allows for continued hydration to take place down hole.

    Provided local regulations allow, it is always recommended to withdraw the tremie line as grout is being pumped. This permits the grout to continue its set undisturbed, reduces pump pressure and minimizes unnecessary migration into formations.

  • Section 3 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack/bulk

  • Section 3 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack/bulk

  • Section 3 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack/bulk

  • Section 3 Body: 
    SiO2 61.4% MgO 1.70%
    Al2O3 18.1% CaO3 0.40%
    Fe2O3 3.50% TiO2 0.20%
    K2O 0.10% Na2O 2.30%
    H2O 7.80% Other 0.07%
    LOS 4.40%  (Loss on Ignition)
  • Section 3 Body: 

    Enviroplug Tablets should be poured directly into the hole or placed by the tremie method. As with gravel packing, the desired result is a bentonite pack. Therefore, take care in placing the tablets to prevent bridging.

    The tablet seal or plug should be placed against an impervious formation, such as clay. Enviroplug Tablets should be allowed to hydrate 1-2 hours before any grout is installed.

    A wide variety of sealing products and application methods exist. Please consult local regulations, a groundwater professional or a product
    representative prior to commencing any sealing or abandonment procedure.

  • Section 3 Body: 

    Appearance: White granular crystal

    Bulk Density: 930 kg/m³ (min)

    Specific Gravity: 2.533 gm/cm³

    Particle Size Distribution:

    Mesh Size #20 #30 #40 #100 #140 #200 Pan
    Microns 850 600 425 150 106 75 <75
    % Retained 0.5 max 3.0 max 30.0 max 85.0 min 93.0 min 98.0 min 2.0 max
  • Section 3 Body: 

    Granulation (mesh): <200

    Solubility: Soluble in water

  • Section 3 Body: 

    Appearance: Free flowing brown powder

    Specific Gravity: 1.30 g/cc

    Bulk Density: 640-750 kg/m³

  • Section 3 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 3 Body: 
    Product Specifications API Specifications 13-A, Sec 9-2004 Typical Hydrogel
    Barrel Yield --- 96 ± 5
    Viscometer Reading at 600 rpm 30 min 36 ± 6
    Water Loss 15.0 cc max 13.5 ± 1
    % through 200 Mesh Screen --- 80 ± 4
    Wet Screen Analysis Residue on U.S. Sieve No. 200 4.0% max 3.0 ± .5
    % Moisture --- 8 ± 2
    pH --- 9.0 ± 1.0
    Gel Strength - 10 sec --- 4 ± 1
    Gel Strength - 10 min --- 12 ± 3
    Plastic Viscosity --- 12 ± 2
    Yield Point, lb/100 sq. ft.  3 x P.V. max 16 ± 2
  • Section 3 Body: 
    • Gardner Denver 5 x 6 Duplex Mud Pump, Fluid-End Parts and Gear-End Parts*
    • Gardner Denver 5 x 8 Duplex Mud Pump
    • Gardner Denver 5.5 x 8 Duplex Mud Pump
    • Gardner Denver 4 x 5 Duplex Mud Pump
    • Gardner Denver 4.5 x 5 Duplex Mud Pump
    • Gardner Denver PAH Duplex Mud Pump
    • Emsco D-300 Duplex Mud Pump
    • Emsco D-375 Duplex Mud Pump
    • Emsco D-175 Duplex Mud Pump
    • Emsco D-500 Duplex Mud Pump
    • Emsco F-500 Triplex Mud Pump

    *Gardner Denver Gear-End Parts have a 4 to 5 day lead time. 

  • Section 3 Body: 

    Appearance: White filaments

    Softening Point: 315°F

    Specific Gravity: 1.0 in treated form

  • Section 3 Body: 

    Type: Amine blend

    Solubility: Water (complete)

    pH: 10.0-11.0

    Microtox: Pending

  • Section 3 Body: 

    Type: Carbon

    Solubility: Negligible

    Microtox: 75% @ (6.0 kg/m³)

  • Section 3 Body: 
    Part Number Description
    102624 HWL Rod Box to Solid Blank
    102625 HD Rod Box to Solid Blank
    102626 HWL Rod Pin to Solid Blank
    102627 HD Rod Pin to Solid Blank
  • Section 3 Body: 
    Part Number Description
    102628 HWL Rod Box to Tubing Blank
    102629 HD Rod Box to Tubing Blank
    102630 HWL Rod Pin to Tubing Blank
    102631 HD Rod Pin to Tubing Blank
  • Section 3 Body: 
    Part Number Description Hoisting Weight
    100596 NW Rod Pin to HWL Rod Pin 10,000/30,000 LB
    102612 NW Rod Pin to HD Rod Pin 10,000/30,000 LB
    102613 NW Rod Pin to HWL Bullnose 10,000/30,000 LB
    102614 NW Rod Pin to HD Bullnose 10,000/30,000 LB
  • Section 3 Body: 
    Part Number Description
    100687 HWL Rod Box to NW Rod Pin (Rod to Casing)
    102621 HD Rod Box to NW Rod Pin (Rod to Casing)
    100687 HWL Rod Box to NW Rod Pin (Rod to Rod)
    102621 HD Rod Box to NW Rod Pin (Rod to Rod)
  • Section 3 Body: 
    Part Number Description
    101866 HWL Rod Box to HW Casing Pin
    102617 HD Rod Box to HW Casing Pin
    100676 HWL Rod Box to HWT Casing Pin
    102618 HD Rod Box to PD (HWT Casing) Rod Pin
    102619 HW Casing Box to HWT Casing (PD Rod Pin)
    102620 HWT Casing (PD Rod) Box to HW Casing Pin
  • Section 3 Body: 
    Part Number Description
    102615 HWL Rod Box to HD Rod Pin
    102616 HD Rod Box to HWL Rod Pin
  • Section 3 Body: 
    Part Number Description
    102622 HWL Water Saver Sub
    102623 HD Water Saver Sub
  • Section 3 Body: 
    Part Number Description
    100668 AW Rod Pin to HWL Rod Pin (Compact)
    102610 AW Rod Pin to HD Rod Pin (Compact)
    100594 BW Rod Pin to HWL Rod Pin (Universal)
    102611 BW Rod Pin to HD Rod Pin (Universal)
  • Section 3 Body: 
    Part Number Description Crown Waterway Configuration
    103873 H Carbonado W Superflush Waterway
    103181 H Carbonado W Wide Waterway
    103247 H Carbonado (OS 3.895) W Wide Waterway
    103438 H Carbonado Tapered Wide Waterway
  • Section 3 Body: 
    Part Number Description
    103037 HWT Casing Bit
  • Section 3 Body: 
    Part Number Description
    101019 HW Level 1 Casing Shoe
    101009 HW Level 2 Casing Shoe
    101020 HWT Level 1 Casing Shoe
    101010 HWT Level 2 Casing Shoe
    103824 HWL Carbonado Casing Shoe
    103795 HW Carbonado Casing Shoe
    103361 HWT Carbonado Casing Shoe
  • Section 3 Body: 
    Part Number Drilling Parameter Edge Series Waterway Configuration
    101632 BTK 6-7 Edge 6 Standard
    101635 BTK 6-7 Edge 6 Wide
    103402 BTK 7-8 Edge 7 Standard
    101633 BTK 6-8 Edge 7 Endurance Standard
    101636 BTK 6-8 Edge 7 Endurance Wide
    103844 BTK 5-9 Edge 8 Abrasive Standard
    102347 BTK 7-9 Edge 8 Endurance Wide
    101038 BTK 7-10 Edge 9 Standard
    101634 BTK 7-9 Edge 9 Endurance Standard
    101637 BTK 7-9 Edge 9 Endurance Wide
    103721 BTK 9-10 Edge 10 Standard
  • Section 3 Body: 
    Part Number Description
    101766 H Standard Reaming Shell
    103311 H Stabilized Reaming Shell
  • Section 3 Body: 
    Part Number Description
    101022 PD (T11) Rod Shoe 
    101012 PD (T12) Rod Shoe
  • Section 3 Body: 
    Part Number Description Qty
    101941 Casing Advancer Assembly -
    102157 Inner Assembly, Casing Advancer -
    102004 Spearhead 1
    102005 Nord-Lock Washer 1
    102006 Release Shaft 1
    102007 Latch Body 1
    102008 Latch Shoe 2
    102009 Spring 2
    102010 Locating Pin 2
    102011 Stop Latch Set 1
    102012 Stop Latch Pin 1
    101889 Split Cotter Pin 2
    101890 Stop Latch Spring 1
    102013 Spacer Set 1
    102014 Bit Sub 1
    102158 Loading Sleeve 1
    101943 Driver 1
  • Section 3 Body: 
    Part Number Description Qty
    101389 Compact Plus Water Swivel Spares -
    101354 Wavy Washer 2
    101355 O-Ring, Upper 6
    101356 Swivel Packing Set 3
    101357 Wear Sleeve, Slotted 2
    101359 Ball Bearing 1
    101361 O-Ring, Lower 6
    101363 Thrust Bearing 1
    101365 Felt Seal 2
  • Section 3 Body: 
    Part Number Description Qty
    101388 Water Swivel Assembly, Compact Plus -
    101353 Swivel Cap 1
    101354 Wavy Washer 1
    101355 O-Ring, Upper 1
    101356 Swivel Packing Set 1
    101357 Wear Sleeve, Slotted 1
    101358 Packing Cage 1
    101359 Ball Bearing 1
    101360 Swivel Body, Upper 1
    101361 O-Ring, Lower 1
    101362 Spindle 1
    101363 Thrust Bearing 1
    101364 Swivel Body, Lower 1
    100461 Grease Fitting 1
    101365 Felt Seal 1
  • Section 3 Body: 
    Part Number Description Qty
    101087 OD Gauge Assembly -
    101085 OD Gauge, Drill Rod New 1
    101057 OD Gauge, Drill Rod Wear 1
    101084 Lock Nut, OD Gauge 1
    101083 Flat Washer, OD Gauge 2
    101082 Hex Bolt, OD Gauge 1
    101090 Wear Sample -
  • Section 3 Body: 
    Part Number Description Qty
    101105 Gauge Assembly, Bit & Shell -
    101116 Gauge, Max New Shell 1
    101117 Gauge, Min New Shell 1
    101118 Gauge, Max New Bit / Worn Shell 1
    101119 Gauge, Min New Bit 1
    101128 Hex Bolt, 1/4-20 UNC x 2" Long, Zinc Plated 1
    101129 Washer, 17/64" ID x 1/2" OD, Zinc Plated 2
    101130 Nylock Nit, 1/4-20 UNC, Zinc Plated 1
  • Section 3 Body: 
    Part Number Description Qty
    100613 Core Barrel Assembly, 3 m (10 ft) -
    100621 Core Barrel Assembly, 1.5 m (5 ft) -
    100769 Locking Coupling, Conventional, Tang
    100542 Adaptor Coupling
    100439 Landing Ring 1
    100545 Outer Tube, 3 m (10 ft) 1
    100588 Outer Tube, 1.5 m (5 ft) -
    100443 Inner Tube Stabilizer 1
    100476 Head Assembly 1
    100544 Inner Tube, 3 m (10 ft) 1
    100587 Inner Tube, 1.5 m (5 ft) -
    100417 Stop Ring 1
    100415 Core Lifter, Slotted 1
    100416 Core Lifter Case 1

     

    Options
    Part Number Description
    101542 Locking Coupling, Conventional, No Tang
    100616 Locking Coupling, Full Hole, Tang
    100741 Locking Coupling, Full Hole, No Tang
    100423 Core Lifter, Fluted
    100418 Core Lifter, Smooth
    100845 Core Lifter, Slotted, Diamond Coated
    100848 Core Lifter, Fluted, Diamond Coated
    100780 Outer Tube 3 m (10 ft) C/P
    100779 Outer Tube 1.5 m (5 ft) C/P
    100788 Inner Tube 3 m (10 ft) C/P
    100787 Inner Tube 1.5 m (5 ft) C/P
    101100 Core Barrel Plug
  • Section 3 Body: 
    Conversion Kit
    Part Number Description Qty
    101424 Link-Latch to Edge Latch Conversion Kit -
    100808 Latch 2
    100450 Latch Spring 1
    100449 Latch Retracting Pin 2
    100451 Latch Pivot Pin 1
    100666 Drift Pin Tool, Latch Retracting Pin 1
    100877 Drift Pin Tool, Latch Pivot Pin 1
    101427 Conversion Instructions 1
    101152 Parts Pouch 1

    To simplify the conversion of your current core barrel systems to the Edge Latch system, Di-Corp offers a conversion assembly which can be attached to the spindle of most systems.

    Conversion Head Assembly
    Part Number Description Qty
    100897 Core Barrel Conversion Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 1
    100464 Spearhead Base 1
    100449 Latch Retracting Pin 2
    100465 Latch Retracting Case 1
    100466 Latch Body, Upper 1
    100451 Latch Pivot Pin 1
    100450 Latch Spring 1
    100808 Latch 2
    100553 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100470 Latch Body, Lower 1
    100453 Lock Washer 1
  • Section 3 Body: 
    Part Number Description Qty
    100476 Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Spring Pin, ø7/16" x 1" Long 1
    100464 Spearhead Base 1
    100449 Latch Retracting Pin 2
    100465 Latch Retracting Case 1
    100466 Upper Latch Body 1
    100451 Latch Pivot Pin 1
    100450 Latch Spring 1
    100808 Latch  2
    100469 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100470 Lower Latch Body 1
    100453 Lock Washer 1
    100454 Hex Nut 1
    100471 Spindle 1
    100455 Shut Off Valve, Hard 2
    100456 Shut Off Washer 2
    100457 Spindle Bearing, Upper 1
    100472 Spindle Bushing 1
    100458 Spindle Bearing, Lower 1
    100459 Compression Spring 1
    100460 Self Locking Nut 1
    100475 Inner Tube Cap Assembly without Thread Protector 1
    100602 Thread Protector 1

     

    Options
    Part Number Description
    100551 Landing Indicator Bushing without OD Groove
    100583 Shut Off Valve, Soft
    101819 Solid Spindle Spacer
    101152 Parts Pouch
    101822 Inner Tube Cap Assembly with Thread Protector
    100607 Fluid Retention Kit
  • Section 3 Body: 
    Inner Tube Cap Assembly without Thread Protector
    Part Number Description Qty
    100475 Inner Tube Cap Assembly without Thread Protector -
    100473 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100452 Stainless Steel Ball, ø22mm 1
    100474 Check Valve Body 1

     

    Inner Tube Cap Assembly with Thread Protector
    Part Number Description Qty
    101822 Inner Tube Cap Assembly with Thread Protector -
    100473 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100452 Stainless Steel Ball, ø22mm 1
    100474 Check Valve Body 1
    100602 Thread Protector, Inner Tube Cap 1

    If drilling in ground conditions where the loss of costly drilling fluids becomes a problem, it may be necessary to replace the Landing Indication components with optional Fluid Retention parts which act like a check valve to maintain a column of fluid in the drill string.

    Fluid Retention Kit
    Part Number Description Qty
    100607 Fluid Retention Kit -
    100452 Stainless Steel Ball, ø22mm 1
    100612 Bushing, Fluid Retention 1
    101138 Bushing, Heavy Mud Fluid Retention 1
    100608 Fluid Retention Compression Spring, Light 1
    100609 Fluid Retention Compression Spring, Medium  1
    100610 Fluid Retention Compression Spring, Heavy 1
  • Section 3 Body: 
    Part Number Description Qty
    103232 Core Barrel Spares Kit -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 2
    100449 Latch Retracting Pin 2
    100450 Latch Spring 2
    100808 Latch 4
    100451 Latch Pivot Pin 2
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 2
    100553 Landing Shoulder 1
    100454 Hex Nut 1
    100455 Shut Off Valve, Hard 4
    100457 Bearing, Upper 1
    100458 Bearing, Lower 1
    100460 Self Locking Nut 1
    100461 Grease Fitting 2
    100434 Stop Ring 2
    100424 Core Lifter, Slotted 20
    100429 Core Lifter Case 4
    100440 Landing Ring 1
    100444 Inner Tube Stabilizer 2
  • Section 3 Body: 
    Part Number Description
    100633 Inner Tube Coupling
    100664 Inner Tube Extension, Stabilized (10") Reaming Shell
      Inner Tube Extension, Double Stabilized (18") Reaming Shell
  • Section 3 Body: 
    Part Number Description Qty
    100517 Overshot Assembly -
    100604 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100523 Cable Swivel Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100534 Locking Sleeve 1
    100526 Hex Nut, 3/4" UNC 1
    100527 Nord-Lock Washer 1
    100528 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100689 Overshot Loading Funnel 1
  • Section 3 Body: 
    Part Number Description Qty
    100635 Overshot Assembly, Rolling -
    100604 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100628 Roller Wheel 6
    100631 Spring Pin, ø3/8" x 1-1/2" Long 6
    100638 Cable Swivel Roller Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100526 Hex Nut, 3/4" UNC 2
    100527 Nord-Lock Washer 2
    100637 Roller Body 1
    100528 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100689 Overshot Loading Funnel 1
  • Section 3 Body: 
    Part Number Description Qty
    101434 Overshot Spares Kit -
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 2
    100461 Grease Fitting 1
    100526 Hex Nut, 3/4" UNC 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link, Overshot 2
    100539 Self Locking Cap Screw 4
  • Section 3 Body: 

    Appearance: Opaque liquid

    Bulk Density: 1010 kg/m3

  • Section 3 Body: 

    Weight: 275 lbs (125 kg)

    Height: 32” (81 cm)

    Width: 27” (68 cm)

    Length: 51” (129 cm)

  • Section 3 Body: 

    Type: Hydrocarbon

    Solubility: Soluble in hydrocarbons

  • Section 3 Body: 

    Appearance: Red liquid

    Specific Gravity: 0.93

    Pour Point: -25°C

    Flash Point: >100°C (CC)

  • Section 3 Body: 

    Appearance: Yellow to brown liquid

    Specific Gravity: 1.1

    Pour Point: -15°C

    Flash Point: 152°C

    Boiling Point: 249°C

  • Section 3 Body: 

    Type: Blend

    Solubility: Soluble in water and brine

    pH: 10.0 - 11.0

  • Section 3 Body: 

    Type: Bactericide

    Solubility: Soluble (100% in water)

    pH: 3.6

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Regulated (see MSDS)

    Packaging: 40lb sack

  • Section 4 Body: 

    Type: Synthetic polymer emulsion

    Solubility: Dispersable - soluble

    pH: 6.5 - 7.5 (1.0% solution)

    Character: HMW anionic 

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kg pail

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L and 60L pails

  • Section 4 Body: 

    Type: Detergent, degreaser 

    Solubility: Soluble in water

    pH: 11.0

    Microtox: 0.5 kg/m³

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 4 Body: 

    Type: Oxygen scavenger

    Solubility: 100% soluble (water)

    pH: 6.8 - 7.4

    Microtox: 75% @ 1.0 L/m³

  • Section 4 Body: 

    Type: Silicone emulsion

    Solubility: Dispersible in water

    Viscosity: 1700 (Brookfield RVT, #3 Spindle, 50 RPM) @ 27°C

    Microtox: >75% @ 0.5 L/m³

  • Section 4 Body: 

    Type: Polymer thinner

    Solubility: Dispersible-soluble

    pH: 7.0 - 8.5

    Microtox: 1.2 L/m³

  • Section 4 Body: 

    Type: Water soluble polymer

    Solubility: Soluble in water

    pH: 7.0 - 7.5 (1% solution)

    Microtox: 2.35 kg/m³

  • Section 4 Body: 

    Type: Surfactant

    Flash Point: >80°C (CC)

    Solubility: Soluble in water

    pH: 7.0 - 8.0

    Microtox: >75% @ 0.4 L/m³

  • Section 4 Body: 

    Appearance: Amber liquid

    Specific Gravity: .91

    Pour Point: <-20°C

    Flash Point: >93°C (PMCC)

  • Section 4 Body: 

    Solubility: Dispersible in water and brine

    Viscosity@ 25°C: 1110 (cST)

  • Section 4 Body: 

    Type: Clay inhibitor

    Solubility: 100% soluble in water

    pH: >12.0

    Microtox: 16.0 L/m³

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pails

  • Section 4 Body: 

    Type: Dispersant

    Solubility: Soluble in oil

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 2kg ziplock bag

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 210L drum

  • Section 4 Body: 

    Type: Blend of surface active agents

    pH: 7.0 - 8.0 

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 40kg sack

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 4 Body: 

    Type: Bactericide

    Solubility: Soluble in water

    pH: 5.0 - 7.0 (1% @20°C)

    Microtox: 10% @ .03 kg/m³

  • Section 4 Body: 

    Type: Co-polymer

    Solubility: Dispersible - Soluble

    Microtox: >91% @ 3.0 kg/m³ (LMW Anionic)

  • Section 4 Body: 

    Type: Shale inhibitor

    Solubility: Soluble in water

    pH: 7.5 (1% solution)

  • Section 4 Body: 

    Type: Cationic polyacrylamide

    Molecular Weight: Medium

    Charge Density: 10%

    Solubility: Soluble-Dispersible

    pH: 3.5 - 4.5 (1% solution)

  • Section 4 Body: 

    Type: Cationic polyacrylamide

    Molecular Weight: Medium

    Charge Density: 10%

    Solubility: Soluble-Dispersible

    pH: 3.5 - 4.5 (1% solution)

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    Type: Defoamer

    Solubility: 3.0 - 4.0 (5% dispersion)

    Microtox: 7% @ 0.285 kg/m³

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    Appearance: Grey-white powder

    Specific Gravity: 4.2 - 4.4

    Moisture Content: 1580°C

  • Section 4 Body: 

    Type: Mineral 

    Solubility: 1.3 mg/100g @ 18°C

    pH: 8.3 - 9.7 (1% slurry)

  • Section 4 Body: 

    Type: Mineral

    Solubility: 1.3 mg/100g @ 18°C

    pH: 8.3 - 9.7 (1% solubility)

  • Section 4 Body: 

    Type: Mineral

    Solubility: 1.3 mg/100g @ 18°C

    pH: 8.3 - 9.7 (1% slurry)

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 80lb sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 80lb sack

  • Section 4 Body: 

    Type: Alkali hydroxide

    Solubility: Soluble (water)

    pH: 12.0 (0.01 moles/liter)

  • Section 4 Body: 

    Appearance: White pellets

    Specific Gravity: 2.13

    Bulk Density: 1169 kg/m³

  • Section 4 Body: 

    Oilfield and Non-Oilfield: Mix into a viscous mud with agitation. Cellophane will not pass through the shaker screen. In order to maintain the Cellophane concentration in the mud the shale shaker must be by-passed. Note: Bypassing the shaker could result in plugged jets.

    Cementing: Add the Cellophane to the cement slurry in the mix tub prior to displacement. No special mixing precautions are required when mixing Cellophane. Care should be taken to avoid mixing the product too quickly as Cellophane will have tendency to plug lines.

  • Section 4 Body: 

    Type: Thinner

    Solubility: Soluble in water

    Microtox: >100% @ 3.0 kg/m³

  • Section 4 Body: 

    Type: Carbon

    Solubility: Soluble in oil

  • Section 4 Body: 

    Type: Anhydrous crystals

    Solubility: 60% @ 20°C (162 gms/100mLs of H20)

    pH 0.1 N solution: 2.2 approx.

  • Section 4 Body: 

    Type: Iron oxide

    Solubility: Insoluble

    pH: 6.5 - 8.0

    FE2O3: 95.6 - 98%

    Moisture: <0.5%

  • Section 4 Body: 

    It has been demonstrated that produced crude oils can contain very persistent bacterial strains that may cause fermentation problems in mud systems with susceptible organic matter such as starch. Much larger treatment doses and/or addition of a secondary biocide may be required when crude oil is added to these drilling fluids.

  • Section 4 Body: 

    Type: Cellulose fluid loss polymer

    pH: 6.5 - 8.0

    Microtox: 100% @ 3.0 kg/m³

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 20L pail

  • Section 4 Body: 
      Standard (ppm) Set Grout (ppm)
    Arsenic 5.0 <0.10
    Barium 100.0 0.50
    Cadmium 1.0 <0.05
    Chromium 5.0 <0.10
    Lead 5.0 <0.10
    Mercury 0.2 <0.02
    Selenium 1.0 <0.05
    Silver 5.0 <0.10
  • Section 4 Body: 

    Type: Viscosifier

    Solubility: Insoluble

    pH: 8.0 - 10.0

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25lb bag

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 22.7kg bag

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 20L pail

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    Type: Co-polymer 

    Solubility: Dispersible-soluble

    pH: 6.0 - 8.0 (0.5% solution)

    Microtox: >91% @ 3.0 kg/m³

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bags

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated 

    Packaging: 25kg bag

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    Type: Lost circulation material

    Solubility: Insoluble

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 30kg bag

  • Section 4 Body: 

    Type: Inorganic salt

    Solubility: Not soluble

    Charge Density: 10.7 max

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 22.7kg bag

  • Section 4 Body: 

    Solubility: 100% soluble in water

    pH: 8.0 - 10.0 (5% aq. solution)

    Chemical Percentage
    Silicone Oxide (SiO2) 61%
    Aluminum Oxide (AlO3) 18.1%
    Ferric Oxide (Fe2O3) 3.5%
    Sodium Oxide (Na2O) 2.3%
    Magnesium Oxide (MgO) 1.7%
    Calcium Oxide (CaO) 0.2%
    Titanium Oxide (TiO2) 0.1%
    Potassium Oxide (K2O) 0.07%
    Other 7.8%
  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    Type: Synthetic sulfonated

    Solubility: Soluble in water

    pH: 7.0 - 9.0 (150 g/L @ 20°C)

    Microtox: >91% @ 11.4 kg/m³

  • Section 4 Body: 

    Type: Synthetic polymer

    Solubility: Soluble in water

    pH: 6.0 - 7.0

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 4 Body: 

    Type: Blend

    Solubility: Insoluble

    pH: 6.8 - 8.5

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bag/bulk

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 40lb sack

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: Single tube

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25-40lb sack

  • Section 4 Body: 

    Type: Chemical compound

    Solubility: Soluble (9.5% @ 20°C)

    pH: 8.5

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    A series of microtox tests have determined the following procedure will deactivate T-352 Biocide and should provide a non-toxic response in drilling muds.

    1. Increase the pH of the fluid to 12.0 and hold for four hours
    2. Neutralize fluid back to pH 7.0 with an appropriate acid
  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 205L drum

  • Section 4 Body: 

    Type: Organic cellulsic fibers

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Regulated (see MSDS)

    Packaging: 25kg sack

  • Section 4 Body: 

    Water Requirement: 40% w/w

    pH: 6.0 - 8.0 (10% solution)

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 2kg ziplock bag

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 4 Body: 

    Appearance: Finely textured greyish powder

    Bulk Density: 0.741 m³/ton

    Composition: Oilwell 'G' Cement / 325 Silica Flour

  • Section 4 Body: 

    Type: Proprietary mixture

    Solubility: Moderate in water

    pH: 6.0 - 8.0 (1% solution)

  • Section 4 Body: 

    Mixing Procedure
    For each 20 kg bag of Earth Pro Hotset Cement being mixed, measure 10 liters of fresh water into the mixing vessel. Begin stirring the water in a moderate fashion, and start adding the Earth Pro Hotset Cement. Once all the sacks are cut and added to the slurry, continue mixing for at least another 5-10 minutes to ensure proper dispersion and all lumps are removed. At this point the mix can be transferred to the dump bail.

    Storage Precautions
    Earth Pro Hotset Cement is not hazardous. However, if product becomes wet through unforeseen circumstances, some heat will be given off due to hydration. Avoid excessively humid conditions. Store in a cool dry place.

    Handling Precautions
    As product is mixed with water, some heat evolution will occur. Caution should be exercised to mix continually until ready to place the slurry in the dump-bail. Earth Pro Hotset Cement is caustic in nature (pH 10-12) and will cause severe burns to eyes and sensitive skin areas. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 4 Body: 
    1. Obtain as much well information as possible for the Earth Pro ResinBond Cement plug, most important are depth, and/or BHST (°C.)
    2. Ensure well has been circulated clean, and that the well is dead.
    3. Measure accurately the correct amount of CLEAN, FRESH water into the mixing vessel. Five (5) liters of water per 20 kg pail of Earth Pro ResinBond Cement is required for proper hydration. Do NOT use produced or contaminated water sources for mixing Earth Pro ResinBond Cement. Uncontrollable slurry properties could result in job failure. Ensure the mixing water temperature is 15-25°C. Lower temperature water may result in difficulty mixing, while using very hot water may lead to loss of working time, again leading to job failure.
    4. In the following table, find the temperature closest to the BHT in the well being serviced. This corresponds to the proper amount of RB Catalyst L PER PAIL of Earth Pro ResinBond Cement required in this well situation.
    5. Carefully pour the required amount of RB Catalyst into the measuring vial. Shake lightly to level. Re-measure and add or remove Catalyst as required. Do NOT tamp, as product will compact, leading to overt treating. Slight overdosing or under dosing will not compromise the overall fluid properties of Earth Pro ResinBond Cement, but care in handling is always recommended.
    6. Add the required amount of RB Catalyst L FIRST to the mixing water. Stir for a minimum of 3-5 minutes to ensure proper dissolution.
    7. Add the Earth Pro ResinBond Cement to the water and RB Catalyst L while mixing steadily to avoid lumping, and mix until the slurry is visibly smooth.
    8. Pour into the dump bailer equipment and run to bottom and place plug as per usual procedure.
    9. Pull up slowly to avoid disturbing plug.
    10. Apply squeeze pressure if required.
    RB Catalyst L Loading
    Depth Temp Catalyst L per 20 kg Measured Volume per 20 kg
    (m) (°C) (grams) (cc)
    400 15 280 Full container
    600 20 220 200
    750 25 170 150
    900 30 150 130
    1100 35 130 110
    1300 40 90 75
    1500 45 60 45
    1700 50 20 15
    1900 55 20 15
    2100 60 20 15

    NOTE: Temperatures are estimates for average Western Canadian well conditions and are for reference purposes only. Please contact oil company personnel for specific well depth/temperature profiles in the area for accuracy.

  • Section 4 Body: 

    Type: Thermally stable oilwell cement

    Solubility: Insoluble in water

    pH: 10.0 - 12.0 (in fresh water)

    Water Requirement: 10L per 20kg blend

  • Section 4 Body: 

    Aluminum: 99.5%

    Silicon: <1.0%

    Iron: <1.0%

    Solubility: Soluble in water

  • Section 4 Body: 

    BaSO4: 92.8%

    Fe2O3: 0.3%

    CaO: 0.3%

    MgO: 0.1%

    Al2O3: 0.14%

    Silicates: 4.6%

    Loss on Ignition: 1.3%

    Total Heavy Metals: 0.001%

    Solubility: Insoluble

    pH: 7.0 - 9.5 

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg/50lb bags

  • Section 4 Body: 

    Calcium Chloride: 93% min

    Magnesium & Alkali Chloride: 5% max

    Loss on Drying: 4% max

    Other Impurities: 0.4%

    Purity: 93% min

    Residual Alkali Chlorides: 5% max

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 20L pail

  • Section 4 Body: 

    Type: Proprietary mixture

    Solubility: Soluble in water

    pH: 8.0 - 10.0 (10% solution)

  • Section 4 Body: 

    Sodium Napthalene Sulphonate: 85%

    Sodium Sulphate: 10%

    Water: 5%

    Solubility: Soluble in water

    pH: 9.5 (1% solution)

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated 

    Packaging: 40-50lb bag

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg bag / 1000kg totes

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bag / bulk

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 4 Body: 

    Solubility: Soluble in water

    pH: 14.0 (1% in fresh water)

  • Section 4 Body: 

    Solubility: Soluble in water

    pH: 14.0 (1% in fresh water)

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kb bag / bulk

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 1700lb bag / bulk

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb bag / bulk

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg pail

  • Section 4 Body: 

    Acid Solubility: <5% by weight

    Solubility: Insoluble in water

    pH: 7.0 (in fresh water)

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 40kg/20kg poly bag

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bag 

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kg bag

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25-40kg sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated 

    Packaging: 20L pail

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 1000L tote

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 1000L tote

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 1000L tote

  • Section 4 Body: 

    Type: Viscosifier

    Solubility: Insoluble

    pH: 8.0 - 10.0

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 40kg bag

  • Section 4 Body: 

    Type: Mineral

    Solubility: 1.3mg/100g @ 18°C

    pH: 8.3 - 9.7 (1% slurry)

  • Section 4 Body: 

    Type: Montmorillonite; bentonite

    Solubility: Insoluble

    pH: 8.0 - 11.0 (5% solution)

  • Section 4 Body: 

    Solubility: Insoluble

    pH: 8.0 - 11.5

  • Section 4 Body: 

    pH: 8.0-10.0

    Typical Chemical Analysis
    SiO2 63.54% MgO 1.67%
    Al2O3 19.28% CaO3 0.38%
    Fe2O3 3.48% TiO2 0.22%
    K2O 0.10% Na2O 2.34%
    MnO 0.02% H2O 4.50%
    LOS 4.37% (Loss on Ignition) 
  • Section 4 Body: 

    Appearance: Pale grey to buff chips 

    Specific Gravity: 2.55 (estimated)

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS

    TDG: Not regulated 

    Packaging: 17kg pail

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 17kg pail

  • Section 4 Body: 

    WHMIS: Not controlled 

    TDG: Not regulated 

    Packaging: 5L / 10L / 15L pail

  • Section 4 Body: 

    Solubility: Insoluble 

    pH: 9.5-11.5

  • Section 4 Body: 

    Type: Natural mineral, montmorillonite

    Solubility: Insoluble, forms colloidal suspension

    pH: 8.0 - 10.0 (5% aq. suspension)

  • Section 4 Body: 

    Appearance: Amber liquid

    Specific Gravity: 1.07

    Pour Point: < -1°C

    Flash Point: > 93.9°C

    Boiling Point: 106°C

  • Section 4 Body: 

    Appearance: Amber liquid

    Concentration: 0.25-3L/m³

  • Section 4 Body: 

    Appearance: Amber liquid

  • Section 4 Body: 

    Appearance: Tan powder

  • Section 4 Body: 

    Type: Guar gum or xanthan gum 

    Solubility: Soluble in water 

    Ionic Charge: Slightly anionic

  • Section 4 Body: 

    Appearance: Tan powder

  • Section 4 Body: 

    Solubility: Not soluble

    pH: 5.5-6.5 (1% in water)

    Vapor Pressure: <10 mm Hg

    Evaporation Rate: <1.0

  • Section 4 Body: 

    Type: Synthetic polymer blend

    Solubility: Partially in water

    pH: 8.0

  • Section 4 Body: 

    Type: Micronized rubber

    Ionic Charge: Neutral

  • Section 4 Body: 

    Type: Swelling polyacrylamide

    Ionic Charge: Anionic

    Solubility: Insoluble in water

  • Section 4 Body: 

    Appearance: White granules

    Bulk Density: 800 kg/m³

  • Section 4 Body: 

    Type: Synthetic polymer

    Ionic Charge: Anionic

    Solubility: Soluble in water

  • Section 4 Body: 

    Type: Lubricant

    Solubility: Soluble in water

    pH: 5.0-8.5

  • Section 4 Body: 

    Solubility: Miscible in water

    pH: 6.0 - 8.0 (5 g/L)

  • Section 4 Body: 

    Solubility: Forms a gel in water

    pH: 4.0 - 7.0 (1% solution)

  • Section 4 Body: 

    Solubility: Insoluble

  • Section 4 Body: 

    Solubility: Dispersable in water

    pH: 6.0 - 8.0 (0.5% solution)

  • Section 4 Body: 

    Type: Hydrophilic polymer

    Solubility: Insoluble

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 4 Body: 

    Specific Gravity: 1.15

    Pour Point: < -35°C

    Flash Point: > 100°C

    Boiling Point: >100°C

  • Section 4 Body: 

    Appearance: Opaque dark yellow to beige liquid

    Specific Gravity: 1.08

  • Section 4 Body: 

    Type: Mixture

    Solubility: Forms a gel in water

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 4 Body: 

    Solubility: Miscible

    pH: 7.0 - 9.0

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 14lb pail

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 10 x 2lb carton

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 5 gal pail

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 1000L tote

  • Section 4 Body: 

    Appearance: Off-white powder

    Bulk Density: 480-640 kg/m³

    Moisture Content: 6-10%

  • Section 4 Body: 

    Type: Polyacrylamide

    pH: 6.5 - 7.5 (1% solution @ 25°C)

    Shelf Life: 6 months

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 5L pail

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 8kg or 15kg pail

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg / 40kg bag or 50lb pail 

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bags

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 1000L tote

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: bulk / 1000L totes

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: bulk / 1000L totes

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: bulk / 1000L totes

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: bulk / 1000L totes

  • Section 4 Body: 
    Product Number Product Name
    42181 Piston 5.5” x 8” API-3 PPGD 204TBB045A
    42184 Piston 5” A API-1 PPGD 219TBA045A
    47335 Piston 5.5” H-B-14/15
    46588 Piston Rubber Kit 4.5” x 5” GD
    46644 Piston Rubber Kit 4” x 5” GD

      

  • Section 4 Body: 
    Product Number Product Name Packaging
    47161 Well Gravel 3/8” 2800lb
    49568 Silica Sand 40/70 Geothermal 50lb
    44269 Sand #40 Bodyshot 99% Silica 50lb
  • Section 4 Body: 
    Product Number Size TPI Description
    46832 2” x 2.5’ 2  
    41098 2” x 5’ 2 .010” Slotted
    41099 2” x 5’ 2 .020” Slotted
    41104 2” x 5’ 2  
    41100 2” x 10’ 2 .010” Slotted
    41101 2” x 10’ 2 .020” Slotted
    41105 2” x 10’ 2  
  • Section 4 Body: 

    Product Number

    Description

    41628

    Bolts for Well Seals

    42191

    Plates for Well Seals

    42245

    Rubber For Well Seals

    37572

    Elbow Well Seal 1”

    37573

    Elbow Well Seal 1.25”

    42399

    6” x 1” Flowing Well Seal

    42400

    6” Steel Well Seal

    46388

    8” Sanitary Well Seal

    46907

    6” Well Kit Solid

    99900801

    6” x 3” Steel Sanitary Well Seal

  • Section 4 Body: 
    • No-purge device provides comparable, formation quality samples of ALL parameters from small-diameter (1.5" and larger) wells for both short and long-term monitoring
    • Protective outer sleeve more than doubles wall thickness
    • Could be useful in steel wells, open boreholes, or anywhere a HydraSleeve could come in contact with jagged edges or increased potential for abrasion
    • Disposable
    • Fits in 1.5 Schedule 40 and larger wells
    • Standard material = virgin 7 mil PE
    • Absolute maximum volume obtainable without spilling 500 mLs
    • Requires the use of 8 oz. Bottom Weight
    • Layflat = 2.5"W x 30"L
    • Filled Diameter = 1.5"
    • Filled Volume = ~500 mL
    • Fill Stroke = 30"
  • Section 4 Body: 
    • Made to hold greater than 2.5 liters of sample volume
    • Protective outer sleeve more than doubles wall thickness
    • Useful in steel wells, open boreholes, or anywhere a HydraSleeve could come in contact with jagged edges or increased potential for abrasion
    • Disposable
    • 2.9 inches O.D. by 37 inches long.  Fill within a 7-foot column.  Lay-flat width 4.614 inches
    • Absolute maximum volume obtainable without spilling 2.9 liters
    • Requires the use of 23 oz. compact weight and weight clip
    • Layflat = 4.61"W x 37"L
    • Filled Diameter = 2.9"
    • Filled Volume = ~2500 mL
    • Fill Stroke = 37"
  • Section 4 Body: 

    Type: Clay inhibitor

    Solubility: 100% soluble in water

    pH: >12.0

    Microtox: 16.0 L/m³

  • Section 4 Body: 
    • Keeps the joint from slipping apart
    • Less bulging and breaking
    • Prevents fluid loss
    • Complete line of accessory products are manufactured with the same precision
  • Section 4 Body: 
    • Pin ends are stamped with a code for easy traceability
    • Standard wireline drill rods have NO identification grooves
    • End cap decals are used to identify the product once packaged for shipping
  • Section 4 Body: 
    • Pin ends are stamped with a code for easy traceability
    • “D” LITE drill rods have one identification groove behind the pin end while “WL” LITE drill rods have three
    • End cap decals are used to identify the product once packaged for shipping
  • Section 4 Body: 
    • 10 mL Receiver Tube for Retort, 2-scales, 0-100% X 0.1, 0-10 mL X 0.1 mL, with certificate 2
    • 20 mL Retort Chamber with Lid (functional with 10 mL Retort Condenser
  • Section 4 Body: 
    • 10 mL Receiver Tube for Retort, 2-scales, 0-100% X 0.1, 0-10 mL X 0.1 mL, with certificate 2
    • 20 mL Retort Chamber with Lid (functional with 10 mL Retort Condenser)
  • Section 4 Body: 
      260 mL Aging Cells 500 mL Aging Cells 1 L Aging Cells
    4 Roller Oven 6 3 3
    5 Roller Oven 12 6 4
  • Section 4 Body: 
      260 mL Aging Cells

    500 mL Aging Cells

    1 L Aging Cells
    4 Roller Oven 6 3 3
    5 Roller Oven 12 8 4
  • Section 4 Body: 
    • Data is available in real time on-screen and is also stored in an Excel spreadsheet for easy graphical viewing and printing
    • A computer running software graphs the data from both cells
    • Windows-based software
  • Section 4 Body: 
    • Data is available in real time on-screen and is also stored in an Excel spreadsheet for easy graphical viewing and printing
    • A computer running software graphs the data from both cells
    • Windows-based software
  • Section 4 Body: 
    • Reports real-time data that can be exported to an Excel, Word, or similar file
    • Enables you to program the temperature, pressure ramps, and motor speed
    • Operates multiple units with one computer
  • Section 4 Body: 
    • Reports real-time data that can be exported to an Excel, Word, or similar file
    • Enables you to program the temperature, pressure ramps, and motor speed
    • Operates multiple units with one computer
  • Section 4 Body: 
    • Power Supply: 115 / 220 Volt, 50/60 Hz
  • Section 4 Body: 

    ADW600 Survey Winch

    isAnalysis Software

  • Section 4 Body: 

    ISRG38 Running Gear Kit

    Sighting Device Kit

    Inline Centralizers

    Tripod

    ADW600 Survey Winch

    isAnalysis Software

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 1000kg totes

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg bag / 900kg tote

  • Section 4 Body: 

    Solubility: 180 kg/m³ @ 20°C

    pH: 12.6 (1% solution)

    Sodium Oxide: 50.5%

    Silicon Dioxide: 46.2%

    Carbon Dioxide: 1.66% max

    Insolubles: 0.02% max

    Iron: 15 ppm max

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 1000 L tote

  • Section 4 Body: 

    Moisture: 9.3%

    Free Swell: 28 mL

    Plate Water Absorption: 776.55%

    Grit % (<75 micron): 3.0%

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: Bulk

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 40kg bag

  • Section 4 Body: 

    Specific Gravity: 10.2 lbs/gallon at 30% solids

    Processed Bulk Density: 58.0+4 lbs/cubic foot

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack/bulk

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb pail

  • Section 4 Body: 

    Solubility: 18% by weight of water @ 21°C

    Sodium Carbonate: 99.5% min

    Sodium: 58.2% min

    Calcium: 150 ppm (max)

    Magnesium: 50 ppm (max)

    Sodium Sulphate: 400 ppm (max)

    Sodium Chloride: 500 ppm (max)

    Iron: 5 ppm (max)

    Moisture: .15% max

    Water Insolubles: 500 ppm (max)

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 4 Body: 

    Chemical: Polymer

    Solubility: Soluble in water

    pH: 7.0 - 9.0 (5% fresh water)

  • Section 4 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 15lb boxes / pails

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 4 Body: 
    Part Number Description
    102639 PD Rod (HWT Casing) Box to Solid Blank
    102640 PD Rod (HWT Casing) Pin to Solid Blank
  • Section 4 Body: 
    Part Number Description
    102641 PD Rod (HWT Casing) Box to Tubing Blank
    102642 PD Rod (HWT Casing) Pin to Tubing Blank
  • Section 4 Body: 
    Part Number Description Hoisting Weight 
    102633 NW Rod Pin to PD Rod (HWT Casing) Pin 10,000/30,000 LB
    102634 NW Rod Pin to PD Rod (HWT Casing) Bullnose 10,000/30,000 LB
  • Section 4 Body: 
    Part Number Description
    102637 PD Rod (HWT Casing) Box to NW Rod Pin (Rod to Casing)
    102637 PD Rod (HWT Casing) Box to NW Rod Pin (Rod to Rod)
  • Section 4 Body: 
    Part Number Description
    102248 PD Rod (HWT Casing) Box to PW Casing Pin
    100678 PD Rod (HWT Casing) Box to PWT Casing (SD Rod) Pin
    102635 PW Casing Box to PWT Casing (SD Rod) Pin
    102636 PWT Casing (SD Rod) Box to PW Casing Pin
  • Section 4 Body: 
    Part Number Description
    102248 PD Rod (HWT Casing) Box to PW Casing Pin
    100678 PD Rod (HWT Casing) Box to PWT Casing (SD Rod) Pin
    102635 PW Casing Box to PWT Casing (SD Rod) Pin
    102636 PWT Casing (SD Rod) Box to PW Casing Pin
  • Section 4 Body: 
    Part Number Description
    102638 PD Water Saver Sub (HWT Casing)
  • Section 4 Body: 
    Part Number Description
    101860 AW Rod Pin to PD (HWT Casing) Rod Pin (Compact)
    102632 BW Rod Pin to PD (HWT Casing) Rod Pin (Universal)
  • Section 4 Body: 
    Part Number Description Crown Waterway Configuration
    103320 H3 Carbonado Tapered Superflush Waterway
    103371 H3 Carbonado Tapered Face-Discharge Waterway
    102880 H3 Carbonado Tapered Wide Waterway
    103688 H3 Carbonado  W Superflush Waterway
    103480 H3 Carbonado W Wide Waterway
    103305 H3 Carbonado (OS 3.895) W Wide Waterway
  • Section 4 Body: 
    Part Number Description
    103151 PWT Casing Bit
  • Section 4 Body: 
    Part Number Description
    101021 PW Level 1 Casing Shoe
    101011 PW Level 2 Casing Shoe
    101022 PWT Level 1 Casing Shoe
    101012 PWT Level 2 Casing Shoe
    103636 PWT Carbonado Casing Shoe
  • Section 4 Body: 
    Part Number Drilling Parameter Edge Series Waterway Configuration
    101263 N 2-4 Edge 2 Abrasive Superflush
    101216 N 2-4 Edge 2 Abrasive Wide
    100958 N 4-6 Edge 5 Standard
    101264 N 4-6 Edge 5 Superflush
    100959 N 4-6 Edge 5 Wide
    101214 N 6-7 Edge 6 Standard
    101670 N 6-7 Edge 6 Superflush
    101217 N 6-7 Edge 6 Wide
    101846 N 6-8 Edge 6 Abrasive Standard
    102303 N 6-8 Edge 6 Abrasive Superflush
    102305 N 6-8 Edge 6 Abrasive Wide
    101573 N 7-8 Edge 7 Standard
    103162 N 7-8 Edge 7 Superflush
    101666 N 7-8 Edge 7 Wide
    100906 N 6-8 Edge 7 Endurance Standard
    100907 N 6-8 Edge 7 Endurance Superflush
    101233 N 6-8 Edge 7 Endurance Wide
    101698 N 7-8 Edge 8 Standard
    101973 N 7-8 Edge 8 Wide
    103772 N 5-9 Edge 8 Abrasive Standard
    103773 N 5-9 Edge 8 Abrasive Superflush
    103501 N 5-9 Edge 8 Abrasive Wide
    101863 N 7-9 Edge 8 Endurance Standard
    102410 N 7-9 Edge 8 Endurance Superflush
    102104 N 7-9 Edge 8 Endurance  Wide
    100853 N 7-10 Edge 9 Standard
    100858 N 7-10 Edge 9 Superflush
    100931 N 7-10 Edge 9 Wide
    101036 N 7-9 Edge 9 Endurance Standard
    101660 N 7-9 Edge 9 Endurance Superflush
    101234 N 7-9 Edge 9 Endurance Wide
    101002 N 9-10 Edge 10 Standard
    103851 N 9-10 Edge 10 Superflush
    102306 N 9-10 Edge 10 Wide
  • Section 4 Body: 
    Part Number Description
    102249 P Standard Reaming Shell
    102745 P Heavy Duty Reaming Shell
  • Section 4 Body: 
    Part Number Description Qty
    102168 Casing Advancer Assembly -
    102170 Inner Assembly, Casing Advancer -
    101876 Spearhead 1
    100453 Nord-Lock Washer 1
    101878 Release Shaft 1
    101880 Latch Body 1
    101882 Latch Shoe 2
    101883 Spring 2
    101884 Locating Pin 2
    101886 Stop Latch Set 1
    101888 Stop Latch Pin 1
    101889 Split Cotter Pin 2
    101890 Stop Latch Spring 1
    101892 Spacer Set 1
    101894 Bit Sub 1
    102172 Loading Sleeve 1
    102174 Driver 1
  • Section 4 Body: 
    Part Number Description Qty
    101389 Compact Plus Water Swivel Spares -
    101354 Wavy Washer 2
    101355 O-Ring, Upper 6
    101356 Swivel Packing Set 3
    101357 Wear Sleeve, Slotted 2
    101359 Ball Bearing 1
    101361 O-Ring, Lower 6
    101363 Thrust Bearing 1
    101365 Felt Seal 2
  • Section 4 Body: 
    Part Number Description Qty
    101388 Water Swivel Assembly, Compact Plus -
    101353 Swivel Cap 1
    101354 Wavy Washer 1
    101355 O-Ring, Upper 1
    101356 Swivel Packing Set 1
    101357 Wear Sleeve, Slotted 1
    101358 Packing Cage 1
    101359 Ball Bearing 1
    101360 Swivel Body, Upper 1
    101361 O-Ring, Lower 1
    101362 Spindle 1
    101363 Thrust Bearing 1
    101364 Swivel Body, Lower 1
    100461 Grease Fitting 1
    101365 Felt Seal 1
  • Section 4 Body: 
    Part Number Description Qty
    101087 OD Gauge Assembly -
    101085 OD Gauge, Drill Rod New 1
    101057 OD Gauge, Drill Rod Wear 1
    101084 Lock Nut, OD Gauge 1
    101083 Flat Washer, OD Gauge 2
    101082 Hex Bolt, OD Gauge 1
    101090 Wear Sample -
  • Section 4 Body: 
    Part Number Description Qty
    101105 Gauge Assembly, Bit & Shell -
    101116 Gauge, Max New Shell 1
    101117 Gauge, Min New Shell 1
    101118 Gauge, Max New Bit / Worn Shell 1
    101119 Gauge, Min New Bit 1
    101128 Hex Bolt, 1/4-20 UNC x 2" Long, Zinc Plated 1
    101129 Washer, 17/64" ID x 1/2" OD, Zinc Plated 2
    101130 Nylock Nit, 1/4-20 UNC, Zinc Plated 1
  • Section 4 Body: 
    Part Number Description Qty
    100614 Core Barrel Assembly, 3 m (10 ft) -
    100622 Core Barrel Assembly, 1.5 m (5 ft) -
    100769 Locking Coupling, Conventional, Tang
    100542 Adaptor Coupling
    100440 Landing Ring 1
    100545 Outer Tube, 3 m (10 ft) 1
    100588 Outer Tube, 1.5 m (5 ft) -
    100444 Inner Tube Stabilizer 1
    100555 Head Assembly 1
    100550 Inner Tube, 3 m (10 ft) 1
    100626 Inner Tube, 1.5 m (5 ft) -
    100434 Stop Ring 1
    100424 Core Lifter, Slotted 1
    100429 Core Lifter Case 1

     

    Options
    Part Number Description
    101542 Locking Coupling, Conventional, No Tang
    100616 Locking Coupling, Full Hole, Tang
    100741 Locking Coupling, Full Hole, No Tang
    100425 Core Lifter, Fluted
    100641 Core Lifter, Smooth
    100846 Core Lifter, Slotted, Diamond Coated
    100849  Core Lifter, Fluted, Diamond Coated
    100780 Outer Tube 3 m (10 ft) C/P
    100779 Outer Tube 1.5 m (5 ft) C/P
    101688 Inner Tube 3 m (10 ft) C/P
    101852 Inner Tube 1.5 m (5 ft) C/P
    100645 Core Barrel Plug
  • Section 4 Body: 
    Conversion Kit
    Part Number Description Qty
    101424 Link-Latch to Edge Latch Conversion Kit -
    100808 Latch 2
    100450 Latch Spring 1
    100449 Latch Retracting Pin 2
    100451 Latch Pivot Pin 1
    100666 Drift Pin Tool, Latch Retracting Pin 1
    100877 Drift Pin Tool, Latch Pivot Pin 1
    101427 Conversion Instructions 1
    101152 Parts Pouch 1

    To simplify the conversion of your current core barrel systems to the Edge Latch system, Di-Corp offers a conversion assembly which can be attached to the spindle of most systems.

    Conversion Head Assembly
    Part Number Description Qty
    100883 Core Barrel Conversion Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 1
    100464 Spearhead Base 1
    100449 Latch Retracting Pin 2
    100465 Latch Retracting Case 1
    100466 Latch Body, Upper 1
    100451 Latch Pivot Pin 1
    100450 Latch Spring 1
    100808 Latch 2
    100469 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100470 Latch Body, Lower 1
    100453 Lock Washer 1
  • Section 4 Body: 
    Part Number Description Qty
    100555 Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Spring Pin, ø7/16" x 1" Long 1
    100464 Spearhead Base 1
    100449 Latch Retracting Pin 2
    100465 Latch Retracting Case 1
    100466 Upper Latch Body 1
    100451 Latch Pivot Pin 1
    100450 Latch Spring 1
    100808 Latch  2
    100469 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100553 Landing Shoulder 1
    100470 Lower Latch Body 1
    100453 Lock Washer 1
    100454 Hex Nut 1
    100471 Spindle 1
    100455 Shut Off Valve, Hard 2
    100456 Shut Off Washer 2
    100457 Spindle Bearing, Upper 1
    100472 Spindle Bushing 1
    100458 Spindle Bearing, Lower 1
    100459 Compression Spring 1
    100460 Self Locking Nut 1
    100556 Inner Tube Cap Assembly without Thread Protector 1

     

    Options
    Part Number Description
    100551 Landing Indicator Bushing without OD Groove
    100583 Shut Off Valve, Soft
    101819 Solid Spindle Spacer
    101152 Parts Pouch
    100607 Fluid Retention Kit
  • Section 4 Body: 
    Inner Tube Cap Assembly without Thread Protector
    Part Number Description Qty
    100556 Inner Tube Cap Assembly without Thread Protector -
    100554 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100452 Stainless Steel Ball, ø22mm 1
    100474 Check Valve Body 1

    If drilling in ground conditions where the loss of costly drilling fluids becomes a problem, it may be necessary to replace the Landing Indication components with optional Fluid Retention parts which act like a check valve to maintain a column of fluid in the drill string.

    Fluid Retention Kit
    Part Number Description Qty
    100607 Fluid Retention Kit -
    100452 Stainless Steel Ball, ø22mm 1
    100612 Bushing, Fluid Retention 1
    101138 Bushing, Heavy Mud Fluid Retention 1
    100608 Fluid Retention Compression Spring, Light 1
    100609 Fluid Retention Compression Spring, Medium  1
    100610 Fluid Retention Compression Spring, Heavy 1
  • Section 4 Body: 
    Part Number Description Qty
    102278 Core Barrel Spares Kit -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 1
    100798 Latch Locking Spring 2
    100805 Latch Locking Pin 2
    100449 Latch Retracting Pin 2
    100807 Latch Case Retracting Pin 2;
    100451 Latch Pivot Pin 2
    100450 Latch Spring 2
    100467 Latch 4
    100827 Spring Seat 2
    100801 Latch Case Spring 2
    100826 Latch Case Spring Sleeve 1
    100828 Spring Cavity Bushing 1
    100468 Landing Indicator Bushing with OD Groove 4
    100764 Pump-In Seal 4
    100469 Landing Shoulder 2
    100455 Shut Off Valve, Hard 4
    100457 Bearing, Upper 1
    100472 Spindle Bushing 1;
    100458 Bearing, Lower 1
    100460 Self Locking Nut 1
    100461 Grease Fitting 2
    100417 Stop Ring 2
    100415 Core Lifter, Slotted 20
    100416 Core Lifter Case 4
    100439 Landing Ring 2
    100443 Inner Tube Stabilizer 2
  • Section 4 Body: 
    Part Number Description Qty
    100517 Overshot Assembly -
    100604 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100523 Cable Swivel Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100534 Locking Sleeve 1
    100526 Hex Nut, 3/4" UNC 1
    100527 Nord-Lock Washer 1
    100528 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100689 Overshot Loading Funnel 1
  • Section 4 Body: 
    Part Number Description Qty
    100635 Overshot Assembly, Rolling -
    100604 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100628 Roller Wheel 6
    100631 Spring Pin, ø3/8" x 1-1/2" Long 6
    100638 Cable Swivel Roller Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100526 Hex Nut, 3/4" UNC 2
    100527 Nord-Lock Washer 2
    100637 Roller Body 1
    100528 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100689 Overshot Loading Funnel 1
  • Section 4 Body: 
    Part Number Description Qty
    101434 Overshot Spares Kit -
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 2
    100461 Grease Fitting 1
    100526 Hex Nut, 3/4" UNC 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link, Overshot 2
    100539 Self Locking Cap Screw 4
  • Section 4 Body: 

    Type: Synthetic poly acrylamide

    Solubility: Soluble in water

    Ionic Charge: Anionic

  • Section 4 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 4 Body: 

    Type: Blend

    Solubility: Dispersible in water and brine

    pH: 6.0 - 8.0

  • Section 4 Body: 

    Type: Blend

    Solubility: Soluble in water and brine

    pH: 12.0 (neat)

  • Section 4 Body: 

    WHMIS: Controlled (MSDS available)

    TDG: Regulated

    Packaging: 20L pail

  • Section 4 Body: 

    WHMIS: Controlled (MSDS available)

    TDG: Regulated

    Packaging: 20L pail, 1000L tote

     

  • Section 5 Body: 

    WHMIS: Not controlled (MSDS available)

    TDG: Not regulated

    Packaging: 18.9 liter pail

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pails

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pails

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pails

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 15kg sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    Type: Blend of surface active agents

    pH: 7.0 - 8.0

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 208L drum

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 200L drum

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: Fiber keg, 25-1kg water-soluble bags in poly packages

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kg pail

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    Type: Inorganic barium salt

    Solubility: Insoluble (water, oil)

    pH: 7.0 - 9.5

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    Type: Sodium hydroxide

    Solubility: 100% soluble (water)

    pH: 13.0 (1% solution)

  • Section 5 Body: 

    Appearance: Polycellulose clear flakes

    Specific Gravity: 1.0

    Bulk Density: 140 kg/m³ loose

    Average Flake Size: 9.5mm

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25lb sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 200L drum

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bags

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 100lb sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb multi-wall paper sack and bulk

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 30lb sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50kg bag

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 1.45 ft³ sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kg bags/bulk

  • Section 5 Body: 

    Type: Thermally stable oilwell cement

    Solubility: Insoluble in water

    pH: 10.0 - 12.0 (in fresh water)

    Water Requirement: 0.41 m³/ton

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 5 Body: 

    Appearance: Greyish - white powder

    Bulk Density: 0.741 m³/ton

    Composition: Oilwell 'G' Cement / 325 Silica Flour

  • Section 5 Body: 

    Appearance: White powder

    Composition: Blend

    Density: 2.3 - 2.5 g/cc

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kg pails

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 40kg bag

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 22.7kg plastic bag or 40kg paper bag

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg bag

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 22.7kg bags

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 50lb bag

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated 

    Packaging: 40kg bag

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg sack

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb bag / bulk

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb bag / bulk

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack / bulk

  • Section 5 Body: 

    Percent Volatile by Volume: 0%

    Solubility: Negligible

  • Section 5 Body: 

    WHMIS: Not controlled 

    TDG: Not regulated 

    Packaging: 17kg pail

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack 

  • Section 5 Body: 

    Solubility: Soluble in water 

    pH: 11.0-12.0

  • Section 5 Body: 

    Type: Synthetic polymer

    pH: 7.0-7.5

    Solubility: Soluble in water

    Ionic Charge: Cationic

  • Section 5 Body: 

    Type: Blend of synthetic, natural and modified natural polymers

    Solubility: Soluble in water

    Ionic Charge: Slightly anionic

  • Section 5 Body: 

    Type: Poly anionic cellulose

    Ionic Charge: Anionic

    Solubility: Soluble in water

    Microtox: 10kg/m³

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    Type: Natural long chain polymer

    Solubility: Soluble in water

    Ionic Charge: Slightly anionic

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lbs bags / 2000lbs super sacks

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    Type: Synthetic poly acrylamide

    pH: 6.0-8.0

    Solubility: Soluble in water

    Ionic Charge: Anionic

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail/1000 L tote

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail 

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 13.6kg pail

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb bag

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    Type: Amine salts

    Solubility: Miscible 100% in water

    Ionic Charge: Slightly cationic

    pH: 8.0

  • Section 5 Body: 

    Type: Polysaccharide suspension

    Solubility: Dispersible

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    Type: Modified polysaccharide

    Solubility: Soluble in water

    pH: 9.0 - 10.5

    Microtox: 10.68 kg/m³

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20kg pail

  • Section 5 Body: 
    Product Number Product Name
    27028 Valve Gravel 5” x 6” and 5.5” x 8”
    42391 Valve Gravel Rubber Ins. PPGD200FGG482A
    42392 Valve Gravel Rubber PPGD 200FGG106
    44382 Valve Gravel Poly 5”x6” and 5”x8” PPFA 140F839
    42390 Seat Gravel 5”x6” and 5”x8” PPGD200FGG039

     

  • Section 5 Body: 
    • No-purge device used to collect and mix, in-situ, sample from 10' well screen
    • Disposable
    • Fits in 2" Schedule 40 and larger wells (will not fit in 2" Schedule 80 PVC)
    • Standard material = virgin 4 mil PE. Tensile strength 25-35 lb.
    • Requires the use of 8 oz. Bottom Weight
    • Layflat = 2.75"W x 36"L
    • Filled Diameter = 1.75"
    • Filled Volume = ~1000 mL
    • Fill Stroke = ~96"
  • Section 5 Body: 
    • No-purge device fills used to collect and mix, in-situ, sample from 10' well screen
    • Disposable
    • Fits in 4" Schedule 40 and larger wells
    • Standard material = virgin 4 mil PE. Tensile strength 15-25 lb
    • Layflat = 4.25"W x 36"L
    • Filled Diameter = 2.83"
    • Filled Volume = ~2000 mL
    • Fill Stroke = ~96"
  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 1000L tote

  • Section 5 Body: 
    • Pin ends are stamped with a code for easy traceability
    • “D” wireline drill rods have two identification grooves behind the pin end, where “D” LITE* drill rods have only one groove
    • End cap decals are used to identify the product once packaged for shipping

    *“LITE” refers to Drillers Edge wireline drill rods that have been manufactured using variable wall material while “D” refers to our deep hole wireline drill rods. Additional sales sheets are available for both versions of drill rod, contact your sales representative.

    WARNING: All threads are precision machined and mixing Di-Corp rods with other manufacturers’ rods, adaptors, or threaded accessories is not recommended. Failure to adhere to this recommendation may cause premature failure, an inspection may result in the warranty becoming void.

  • Section 5 Body: 
    • All rods are packaged and sold in bundles
    • The entire length of the rod is coated with Krown rust protection oil
    • Box and pin ends are protected with plastic end caps to ensure the anti-galling thread compound does not get contaminated or removed before first use
    • Hexagonal bundle end caps further protect the rod ends during shipping and make them easier to stack

    Packaging & Shipping Information - Drill Rod

  • Section 5 Body: 
    • All rods are packaged and sold in bundles
    • The entire length of the rod is coated with Krown rust protection oil
    • Box and pin ends are protected with plastic end caps to ensure the anti-galling thread compound does not get contaminated or removed before first use
    • Hexagonal bundle end caps further protect the rod ends during shipping and make them easier to stack

    Packaging & Shipping Information - Drill Rod

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 40kg bag

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 40 kg bag

  • Section 5 Body: 

    Dry Fineness: 80% min passing 200 mesh screen

    Thermal Conductivity: 0.43 Btu/hr-ft-oF

    Technical Chemical Analysis %
    SiO2 61.40 MgO 1.70 Al2O3 18.10
    CaO3 0.40 Fe2O3 3.50 TiO2 0.20
    K2O 0.10 Na2O 2.30 MnO 0.10
    H2O 4.50 LOS 4.37  (Loss on Ignition)
  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25kg/40kg bag or 50lb pail 

  • Section 5 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated 

    Packaging: 25kg bag

  • Section 5 Body: 

     

     

  • Section 5 Body: 
    Part Number Description Crown Waterway Configuration
    103147 P Carbonado W Face-Discharge Waterway
    103273 P Carbonado W Wide Waterway
    103931 P Carbonado (OS 4.950) W Superflush Waterway
    103657 P Carbonado (OS 4.950) Tapered Wide Waterway
  • Section 5 Body: 
    Part Number Description
    103650 SWT Carbonado Casing Shoe
  • Section 5 Body: 
    Part Number Drilling Parameter Edge Series Waterway Configuration
    101737 N2 2-4 Edge 2 Abrasive Superflush
    102744 N2 2-4 Edge 2 Abrasive Wide
    101719 N2 4-6 Edge 5 Superflush
    101212 N2 4-6 Edge 5 Wide
    103618 N2 6-7 Edge 6 Standard
    101203 N2 6-7 Edge 6 Superflush
    101631 N2 6-7 Edge 6 Wide
    103619 N2 6-7 Edge 6 Abrasive Standard
    102959 N2 7-8 Edge 7 Wide
    101621 N2 6-8 Edge 7 Endurance Standard
    101622 N2 6-8 Edge 7 Endurance Wide
    101833 N2 7-8 Edge 8 Standard
    101785 N2 7-8 Edge 8 Superflush
    103799 N2 5-9 Edge 8 Abrasive Wide
    103777 N2 7-9 Edge 8 Abrasive Wide
    103992 N2 7-9 Edge 8 Endurance Standard
    102346 N2 7-9 Edge 8 Endurance Superflush
    103248 N2 7-9 Edge 8 Endurance Wide
    100880 N2 7-10 Edge 9 Standard
    100881 N2 7-10 Edge 9 Superflush
    100943 N2 7-10 Edge 9 Wide
    101078 N2 7-9 Edge 9 Endurance Standard
    101077 N2 7-9 Edge 9 Endurance Superflush
    101079 N2 7-9 Edge 9 Endurance Wide
    103989 N2 9-10 Edge 10 Standard
    102345 N2 9-10 Edge 10 Superflush
    103864 N2 9-10 Edge 10 Wide
  • Section 5 Body: 
    Part Number Description Qty
    101869 Casing Advancer Assembly -
    101875 Inner Assembly, Casing Advancer -
    101876 Spearhead 1
    100453 Nord-Lock Washer 1
    101878 Release Shaft 1
    101879 Latch Body 1
    101881 Latch Shoe 2
    101883 Spring 2
    101884 Locating Pin 2
    101885 Stop Latch Set 1
    101887 Stop Latch Pin 1
    101889 Split Cotter Pin 2
    101890 Stop Latch Spring 1
    101891 Spacer Set 1
    101893 Bit Sub 1
    102107 Loading Sleeve 1
    101897 Driver 1
  • Section 5 Body: 
    Part Number Description Qty
    101389 Compact Plus Water Swivel Spares -
    101354 Wavy Washer 2
    101355 O-Ring, Upper 6
    101356 Swivel Packing Set 3
    101357 Wear Sleeve, Slotted 2
    101359 Ball Bearing 1
    101361 O-Ring, Lower 6
    101363 Thrust Bearing 1
    101365 Felt Seal 2
  • Section 5 Body: 
    Part Number Description Qty
    101388 Water Swivel Assembly, Compact Plus -
    101353 Swivel Cap 1
    101354 Wavy Washer 1
    101355 O-Ring, Upper 1
    101356 Swivel Packing Set 1
    101357 Wear Sleeve, Slotted 1
    101358 Packing Cage 1
    101359 Ball Bearing 1
    101360 Swivel Body, Upper 1
    101361 O-Ring, Lower 1
    101362 Spindle 1
    101363 Thrust Bearing 1
    101364 Swivel Body, Lower 1
    100461 Grease Fitting 1
    101365 Felt Seal 1
  • Section 5 Body: 
    Part Number Description Qty
    101088 OD Gauge Assembly -
    101086 OD Gauge, Drill Rod New 1
    101058 OD Gauge, Drill Rod Wear 1
    101084 Lock Nut, OD Gauge 1
    101083 Flat Washer, OD Gauge 2
    101082 Hex Bolt, OD Gauge 1
    101091 Wear Sample -
  • Section 5 Body: 
    Part Number Description Qty
    101106 Gauge Assembly, Bit & Shell -
    101120 Gauge, Max New Shell 1
    101121 Gauge, Min New Shell 1
    101122 Gauge, Max New Bit / Worn Shell 1
    101123 Gauge, Min New Bit 1
    101128 Hex Bolt, 1/4-20 UNC x 2" Long, Zinc Plated 1
    101129 Washer, 17/64" ID x 1/2" OD, Zinc Plated 2
    101130 Nylock Nit, 1/4-20 UNC, Zinc Plated 1
  • Section 5 Body: 
    Part Number Description Qty
    101790 Core Barrel Assembly, 3 m (10 ft) -
    101791 Core Barrel Assembly, 1.5 m (5 ft) -
    100769 Locking Coupling, Conventional, Tang 1
    100542 Adaptor Coupling 1
    100439 Landing Ring 1
    100545 Outer Tube, 3 m (10 ft) 1
    100588 Outer Tube, 1.5 m (5 ft) -
    100443 Inner Tube Stabilizer 1
    100476 Head Assembly 1
    100544 Inner Tube, 3 m (10 ft) 1
    100587 Inner Tube, 1.5 m (5 ft) -
    101787 Stop Ring* 1
    101780 Core Lifter, Fluted* 1
    101144 Core Lifter Case* 1

    *These items are exclusive to the triple tube system, all other items are common with the standard double tube core barrel system.

    Pump Out Group*
    Part Number Description Qty
    101794 Pump-Out Adaptor 1
    101370 Piston Plug 1
    101381 O-Ring 1
    101380 Core Ejection Piston 1
    101366 Split Tube, 3 m (10 ft) 1
    101711 Split Tube, 1.5 m (5 ft) -

     

    Options
    Part Number Description
    101542 Locking Coupling, Conventional, No Tang
    100616 Locking Coupling, Full Hole, Tang
    100741 Locking Coupling, Full Hole, No Tang
    101789 Core Lifter, Fluted, Diamond Coated
    101716 Core Barrel Plug
  • Section 5 Body: 
    Conversion Kit
    Part Number Description Qty
    101425 Link-Latch to Edge Latch Conversion Kit -
    100496 Latch 2
    100450 Latch Spring 1
    100483 Latch Retracting Pin 2
    100484 Latch Pivot Pin 1
    100666 Drift Pin Tool, Latch Retracting Pin 1
    100877 Drift Pin Tool, Latch Pivot Pin 1
    101427 Conversion Instructions 1
    101152 Parts Pouch 1

    To simplify the conversion of your current core barrel systems to the Edge Latch system, Di-Corp offers a conversion assembly which can be attached to the spindle of most systems.

    Conversion Head Assembly
    Part Number Description Qty
    100898 Core Barrel Conversion Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 1
    100493 Spearhead Base 1
    100483 Latch Retracting Pin 2
    101394 Latch Retracting Case 1
    101395 Latch Body, Upper 1
    100484 Latch Pivot Pin 1
    100450 Latch Spring 1
    100496 Latch 2
    100497 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100498 Latch Body, Lower 1
    100485 Lock Washer 1
  • Section 5 Body: 
    Part Number Description Qty
    100476 Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Spring Pin, ø7/16" x 1" Long 1
    100464 Spearhead Base 1
    100449 Latch Retracting Pin 2
    100465 Latch Retracting Case 1
    100466 Upper Latch Body 1
    100451 Latch Pivot Pin 1
    100450 Latch Spring 1
    100808 Latch  2
    100469 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100470 Lower Latch Body 1
    100453 Lock Washer 1
    100454 Hex Nut 1
    100471 Spindle 1
    100455 Shut Off Valve, Hard 2
    100456 Shut Off Washer 2
    100457 Spindle Bearing, Upper 1
    100472 Spindle Bushing 1
    100458 Spindle Bearing, Lower 1
    100459 Compression Spring 1
    100460 Self Locking Nut 1
    100475 Inner Tube Cap Assembly without Thread Protector 1
    100602 Thread Protector 1

     

    Options
    Part Number Description
    100551  Landing Indicator Bushing without OD Groove
    100583  Shut Off Valve, Soft
    101819  Solid Spindle Spacer
    101152  Parts Pouch
    101822  Inner Tube Cap Assembly with Thread Protector
    100607  Fluid Retention Kit
  • Section 5 Body: 
    Inner Tube Cap Assembly without Thread Protector
    Part Number Description Qty
    100475 Inner Tube Cap Assembly without Thread Protector -
    100473 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100452 Stainless Steel Ball, ø22mm 1
    100474 Check Valve Body 1

     

    Inner Tube Cap Assembly with Thread Protector
    Part Number Description Qty
    101822 Inner Tube Cap Assembly with Thread Protector -
    100473 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100452 Stainless Steel Ball, ø22mm 1
    100474 Check Valve Body 1
    100602 Thread Protector, Inner Tube Cap 1

    If drilling in ground conditions where the loss of costly drilling fluids becomes a problem, it may be necessary to replace the Landing Indication components with optional Fluid Retention parts which act like a check valve to maintain a column of fluid in the drill string.

    Fluid Retention Kit
    Part Number Description Qty
    100607 Fluid Retention Kit -
    100452 Stainless Steel Ball, ø22mm 1
    100612 Bushing, Fluid Retention 1
    101138 Bushing, Heavy Mud Fluid Retention 1
    100608 Fluid Retention Compression Spring, Light 1
    100609 Fluid Retention Compression Spring, Medium  1
    100610 Fluid Retention Compression Spring, Heavy 1
  • Section 5 Body: 
    Part Number Description Qty
    100505 Core Barrel Spares Kit -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 2
    100483 Latch Retracting Pin 2
    100450 Latch Spring 2
    100496 Latch 4
    100484 Latch Pivot Pin 2
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 2
    100497 Landing Shoulder 1
    100486 Hex Nut 1
    100487 Shut Off Valve, Hard 4
    100489 Bearing, Upper 2
    100457 Bearing, Lower 1
    100492 Self Locking Nut 1
    100461 Grease Fitting 2
    100435 Stop Ring 2
    100419 Core Lifter, Slotted 20
    100430 Core Lifter Case 4
    100441 Landing Ring 1
    100445 Inner Tube Stabilizer 2
  • Section 5 Body: 
    Part Number Description Qty
    100517 Overshot Assembly -
    100604 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100523 Cable Swivel Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100534 Locking Sleeve 1
    100526 Hex Nut, 3/4" UNC 1
    100527 Nord-Lock Washer 1
    100528 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100689 Overshot Loading Funnel 1
  • Section 5 Body: 
    Part Number Description Qty
    100636 Overshot Assembly, Rolling -
    100605 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100692 Roller Wheel 6
    100631 Spring Pin, ø3/8" x 1-1/2" Long 6
    100638 Cable Swivel Roller Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100526 Hex Nut, 3/4" UNC 2
    100527 Nord-Lock Washer 2
    100637 Roller Body 1
    100536 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100690 Overshot Loading Funnel 1
  • Section 5 Body: 
    Part Number Description Qty
    102279 Overshot Spares Kit -
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 2
    100461 Grease Fitting 1
    100838 Shear Pin 1
    100764 Pump-In Seal 4
    100468 Landing Indicator Bushing, OD Groove 2
    100529 Compression Spring 1
    100840 Pivot Pin 1
    100841 Sway Pin 1
    100530 Lifting Dog 2
  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 5 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 205 liter drum

  • Section 5 Body: 

    WHMIS: Controlled (MSDS available)

    TDG: Not regulated

    Packaging: 205 liter drum

  • Section 6 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 208L drum

  • Section 6 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 40kg sack

  • Section 6 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Regulated

    Packaging: 50lb sack

  • Section 6 Body: 

    Type: Lost circulation material

    Solubility: Not soluble

  • Section 6 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kg bag / bulk

  • Section 6 Body: 

    Type: Thermally stable oilwell cement

    Solubility: Insoluble

    pH: 10.0 - 12.0 (in fresh water)

    Water Requirement: 10 liters per 20kg blend

  • Section 6 Body: 

    Solubility: Partly soluble in water

    Water Requirement: 5L/20kg

    pH: 6.0 - 8.0 (1% solution)

  • Section 6 Body: 

    WHMIS: Controlled (see MSDS

    TDG: Not regulated 

    Packaging: 50lb bags / bulk

  • Section 6 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail/1000L tote

  • Section 6 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 6 Body: 

    WHMIS: Not controlled 

    TDG: Not regulated 

    Packaging: 20L pail

  • Section 6 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 6 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 20L pail

  • Section 6 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 16kg pail

  • Section 6 Body: 

    WHMIS: Not controlled

    TD: Not regulated

    Packaging: 20L pail

  • Section 6 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20L pail

  • Section 6 Body: 

    WHMIS: Not controlled

    TDG: Not regulated

    Packaging: 50lb sack

  • Section 6 Body: 
    Product Number Product Name
    27024 Junk Ring 5” x 6” Thick
    27025 Junk Ring 5” x 6” Thin
    27075 Valve Inserts 5” x 6”
    41958 Gasket Cylinder Head 6 ¼” PPGD25G24
    41959 Gasket Valve Cover 5”x6” and 5” x 8” PPGD 25G18
    42334 Spring Valve Brass PPGD78D22
    47324 Valve Spring HD for D-300 (Red Strip)
    47346 Cylinder Head Flange Gasket for D-300 Fluid End
    47347 Valve Bumper for D-300 Fluid End
    48782 Rubber Insert Standard Valve 5”x6” PPGD 1FG452
    48783 Seat Standard 5”x6”, 5”x8”, 5.5”x8”, 5”x10”, 5.5”x10” PPGD  11FG39
  • Section 6 Body: 
    • All rods are packaged and sold in bundles
    • The entire length of the rod is coated with Krown rust protection oil
    • Box and pin ends are protected with plastic end caps to ensure the anti-galling thread compound does not get contaminated or removed before first use
    • Hexagonal bundle end caps further protect the rod ends during shipping and make them easier to stack

    Packaging & Shipping Information - Drill Rod

  • Section 6 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 50lb sack / bulk

  • Section 6 Body: 
    Part Number Description Crown Waterway Configuration
    103496 P3 Carbonado Tapered Face-Discharge Waterway
    103852 P3 Carbonado Tapered Wide Waterway
    102282 P3 Carbonado W Face-Discharge Waterway
    102281 P3 Carbonado  W Wide Waterway
    103882 P3 Carbonado (OS 4.950) W Superflush Waterway
  • Section 6 Body: 
    Part Number Drilling Parameter Edge Series Waterway Configuration
    101279 N3 2-4 Edge 2 Abrasive Superflush
    101227 N3 4-6 Edge 5 Superflush
    103418 N3 4-6 Edge 5 Wide
    102309 N3 6-8 Edge 6 Abrasive Superflush
    101228 N3 6-7 Edge 6 Superflush
    103656 N3 6-7 Edge 6 Wide
    101721 N3 7-8 Edge 7 Superflush
    103419 N3 7-8 Edge 7 Wide
    101229 N3 6-8 Edge 7 Endurance Superflush
    101248 N3 6-8 Edge 7 Endurance Wide
    103766 N3 5-9 Edge 8 Abrasive Superflush
    103778 N3 5-9 Edge 8 Abrasive Superflush
    102369 N3 7-8 Edge 8 Superflush
    102885 N3 7-9 Edge 8 Endurance Superflush
    101230 N3 7-9 Edge 9 Endurance Superflush
    101247 N3 7-9 Edge 9 Endurance Wide
  • Section 6 Body: 
    Part Number Description Qty
    101868 Casing Advancer Assembly -
    101874 Inner Assembly, Casing Advancer -
    101876 Spearhead 1
    100453 Nord-Lock Washer 1
    101878 Release Shaft 1
    101880 Latch Body 1
    101882 Latch Shoe 2
    101883 Spring 2
    101884 Locating Pin 2
    101886 Stop Latch Set 1
    101888 Stop Latch Pin 1
    101889 Split Cotter Pin 2
    101890 Stop Latch Spring 1
    101892 Spacer Set 1
    101894 Bit Sub 1
    101896 Loading Sleeve 1
    101898 Driver 1
  • Section 6 Body: 
    Part Number Description Qty
    101389 Compact Plus Water Swivel Spares -
    101354 Wavy Washer 2
    101355 O-Ring, Upper 6
    101356 Swivel Packing Set 3
    101357 Wear Sleeve, Slotted 2
    101359 Ball Bearing 1
    101361 O-Ring, Lower 6
    101363 Thrust Bearing 1
    101365 Felt Seal 2
  • Section 6 Body: 
    Part Number Description Qty
    101865 Water Swivel Assembly, Compact Plus -
    101864 Swivel Cap 1
    101354 Wavy Washer 1
    101355 O-Ring, Upper 1
    101356 Swivel Packing Set 1
    101357 Wear Sleeve, Slotted 1
    101358 Packing Cage 1
    101359 Ball Bearing 1
    101360 Swivel Body, Upper 1
    101361 O-Ring, Lower 1
    101362 Spindle 1
    101363 Thrust Bearing 1
    101364 Swivel Body, Lower 1
    100461 Grease Fitting 1
    101365 Felt Seal 1
  • Section 6 Body: 
    Part Number Description Qty
    101088 OD Gauge Assembly -
    101086 OD Gauge, Drill Rod New 1
    101058 OD Gauge, Drill Rod Wear 1
    101084 Lock Nut, OD Gauge 1
    101083 Flat Washer, OD Gauge 2
    101082 Hex Bolt, OD Gauge 1
    101091 Wear Sample -
  • Section 6 Body: 
    Part Number Description Qty
    101106 Gauge Assembly, Bit & Shell -
    101120 Gauge, Max New Shell 1
    101121 Gauge, Min New Shell 1
    101122 Gauge, Max New Bit / Worn Shell 1
    101123 Gauge, Min New Bit 1
    101128 Hex Bolt, 1/4-20 UNC x 2" Long, Zinc Plated 1
    101129 Washer, 17/64" ID x 1/2" OD, Zinc Plated 2
    101130 Nylock Nit, 1/4-20 UNC, Zinc Plated 1
  • Section 6 Body: 
    Part Number Description Qty
    100795 Core Barrel Assembly, 3 m (10 ft) -
    100794 Core Barrel Assembly, 1.5 m (5 ft) -
    101542 Locking Coupling, Conventional, No Tang
    100766 Drive Coupling
    100439 Landing Ring 1
    100545 Outer Tube, 3 m (10 ft) 1
    100588 Outer Tube, 1.5 m (5 ft) -
    100443 Inner Tube Stabilizer 1
    100791 Head Assembly 1
    100544 Inner Tube, 3 m (10 ft) 1
    100587 Inner Tube, 1.5 m (5 ft) -
    100417 Stop Ring 1
    100415 Core Lifter, Slotted 1
    100416 Core Lifter Case 1

     

    Options
    Part Number Description
    100741 Locking Coupling, Full Hole, No Tang
    100551 Landing Indicator Bushing, No OD Groove
    100583 Shut-Off Valve, Soft
    101819 Solid Spindle Spacer
    101822 Inner Tube Cap Assembly, With Thd. Protector
    100632 Inner Tube Coupling
    100552 Inner Tube Extension, Stabilized (10") Shell
    100903 Inner Tube Extension, Double Stabilized (18") Shell
    100423 Core Lifter, Fluted
    100845 Core Lifter, Slotted, Diamond Coated
    100848 Core Lifter, Fluted, Diamond Coated
    100418 Core Lifter, Smooth
    100645 Graphite Core Barrel Plug
    101105 Gauge Assembly, Bit & Shell
    100780 Outer Tube, Chrome Plated, 3.0 m (10 ft)
    100779 Outer Tube, Chrome Plated, 1.5 m (5 ft)
    100788 Inner Tube, Chrome Plated, 3.0 m (10 ft)
    100787 Inner Tube, Chrome Plated, 1.5 m (5 ft)
    101152 Parts Pouch
    100607 Fluid Retention Kit
  • Section 6 Body: 
    Conversion Kit
    Part Number Description Qty
    101425 Link-Latch to Edge Latch Conversion Kit -
    100496 Latch 2
    100450 Latch Spring 1
    100483 Latch Retracting Pin 2
    100484 Latch Pivot Pin 1
    100666 Drift Pin Tool, Latch Retracting Pin 1
    100877 Drift Pin Tool, Latch Pivot Pin 1
    101427 Conversion Instructions 1
    101152 Parts Pouch 1

    To simplify the conversion of your current core barrel systems to the Edge Latch system, Di-Corp offers a conversion assembly which can be attached to the spindle of most systems.

    Conversion Head Assembly
    Part Number Description Qty
    100898 Core Barrel Conversion Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 1
    100493 Spearhead Base 1
    100483 Latch Retracting Pin 2
    101394 Latch Retracting Case 1
    101395 Latch Body, Upper 1
    100484 Latch Pivot Pin 1
    100450 Latch Spring 1
    100496 Latch 2
    100497 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100498 Latch Body, Lower 1
    100485 Lock Washer 1
  • Section 6 Body: 
    Part Number Description Qty
    100791 Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Spring Pin, ø7/16" x 1" Long 1
    100796 Spearhead Base 1
    100798 Latch Locking Spring 1
    100805 Latch Locking Pin 1
    100449 Latch Retracting Pin 2
    100797 Latch Retracting Case 1
    100807 Latch Retracting Case Pin 1
    100804 Latch Body, Upper 1
    100451 Latch Pivot Pin 1
    100450 Latch Spring 1
    100808 Latch 2
    100827 Spring Seat 1
    100801 Latch Retracting Case Spring 1
    100826 Spring Sleeve 1
    100828 Spring Cavity Bushing 1
    100809 Latch Body Adaptor 1
    100764 Pump-In Seal 2
    100810 Latch Body Seal Seat 1
    100452 Stainless Steel Ball 1
    100468 Landing Indicator Bushing, OD Groove 1
    100469 Landing Shoulder 1
    100470 Latch Body, Lower 1
    100453 Nord-Lock Washer 1
    100454 Lock Nut 1
    100471 Spindle 1
    100455 Shut-Off Valve, Hard 2
    100456 Shut-Off Washer 2
    100457 Spindle Bearing, Upper 1
    100472 Spindle Bushing 1
    100458 Spindle Bearing, Lower 1
    100459 Compression Spring 1
    100460 Self Locking Hex Nut 1
    100475 Inner Tube Cap Assembly, No Thd. Protector 1
    100602 Thread Protector, Inner Tube Cap 1

     

  • Section 6 Body: 
    NU Loading Chamber Assembly
    Part Number Description Qty
    100909 NU Loading Chamber Assembly -
    100910 Packing Plug 1
    100911 Cable Guide Washer 2
    100912 Cable Packing 1
    100913 Quick Coupler 1
    100914 Loading Chamber Body 1
  • Section 6 Body: 
    Part Number Description Qty
    100842 Overshot Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100836 Cable Swivel Body 1
    100838 Shear Pin 1
    100837 Upper Body 1
    100764 Pump-In Seal 2
    100810 Latch Body Seal Seat 1
    100452 Stainless Steel Ball 2
    100468 Landing Indicator Bushing, OD Groove 1
    100839 Overshot Head Body 1
    100529 Compression Spring 1
    100840 Pivot Pin 1
    100841 Sway Pin 1
    100530 Lifting Dog 2
  • Section 6 Body: 
    Part Number Description Qty
    100636 Overshot Assembly, Rolling -
    100605 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100692 Roller Wheel 6
    100631 Spring Pin, ø3/8" x 1-1/2" Long 6
    100638 Cable Swivel Roller Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100526 Hex Nut, 3/4" UNC 2
    100527 Nord-Lock Washer 2
    100637 Roller Body 1
    100536 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100690 Overshot Loading Funnel 1
  • Section 6 Body: 
    Part Number Description Qty
    101779 Overshot Spares Kit -
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 2
    100461 Grease Fitting 1
    100526 Hex Nut, 3/4" UNC 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    101498 Lifting Dog Pivot Pin 1
    100807 Sway Pin 1
    101487 Pin Link, Overshot 2
    100533 Self Locking Cap Screw 4
  • test: 

    fdfdsfds

    343432yttuytuty

    jjujuiyiuy

  • Grades: 1
  • Grades: 4
  • Grades: 7
  • Grades: 1
  • Grades: 2
  • Grades: 3
  • Grades: 4
  • Grades: 5
  • Grades: 6
  • Grades: 8
  • Grades: 4
  • Grades: 5
  • Grades: 6
  • Grades: 7
  • Grades: 8
  • Grades: 9
  • Grades: 7
  • Grades: 1
  • Grades: 2
  • Grades: 3
  • Grades: 4
  • Grades: 5
  • Grades: 6
  • Grades: 6
  • Grades: 7
  • Grades: 8
  • Grades: 9
  • Grades: 7
  • Grades: 8
  • Grades: 9
  • Grades: 4
  • Grades: 4
  • Grades: 5
  • Grades: 5
  • Grades: 6
  • Grades: 6
  • Grades: 7
  • Grades: 7
  • Grades: 8
  • Grades: 8
  • Grades: 9
  • Grades: 9
  • Grades: 4
  • Grades: 4
  • Grades: 5
  • Grades: 5
  • Grades: 6
  • Grades: 6
  • Grades: 7
  • Grades: 7
  • Grades: 8
  • Grades: 8
  • Grades: 9
  • Grades: 9
  • Grades: 7
  • Grades: 7
  • Grades: 8
  • Grades: 8
  • Grades: 9
  • Grades: 9
  • Grades: 7
  • Grades: 7
  • Grades: 8
  • Grades: 9
  • Grades: 9
  • Grades: 9
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: Alberta Distance Learning Centre | ADLC
  • Publisher: ADLC & AU
  • Section 1 Body: 

    Fluids may be filtered through Activated Carbon or the Activated Carbon may also be added directly to a contaminated fluid to remove impurities. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 
    • Drilling fluid additive - viscosifier, foam stabilizer or flocculant
    • Anionic water soluble polymer
    • Can be used in gumbo shales
    • Holes larger than 222 mm will require higher concentrations when used as a flocculant
  • Section 1 Body: 

    Earth Pro Can-Break ECA can be added directly to the mud system through the mixing hopper. It is advisable to use a dust mask and eye protection while mixing all powdered products. 

    In case of contact, immediately flush with copious amounts of water. Flush eyes with flowing water immediately and continuously for 20 minutes. 

    See a physician if necessary. Remove contaminated clothes and shoes. Wash clothes before re-use. Employ eye and skin protection when handling this product. 

  • Section 1 Body: 

    Avoid eye and skin contact. Should contact occur flush thoroughly with water. When Earth Pro Can-Free is added directly to the mud, some shear or moderate agitation should be applied. As a spotting fluid, Earth Pro Can-Free mixes readily with diesel or crude oil. 

  • Section 1 Body: 
    • Organic solvent-based degreaser, emulsifier and deodorizer
    • Removes oil and grease in many cleaning applications
    • Particularly useful for hydrocarbon residue removal
    • Biodegradable rig wash
    • Contains no petroleum distillates
    • Cost-effective
  • Section 1 Body: 

    CoreMix will yield in both hard and brackish water.  The recommended concentration of CoreMix ranges from 4-6 kg/m³ depending on drilling conditions.

  • Section 1 Body: 

    Under normal conditions, for a program with a corrosion level of +25 mpy, initially add one pail of Earth Pro Corinox per 16m³ of fluid to be treated. Sever corrosion may require higher concentrations.

    To assess the requirement of Earth Pro Corinox in any condition, it is best to use a corrosion rate method such as corrosion ring analysis or an instantaneous corrosion monitor. 

    If high corrosion rates persist and are determined to be oxygen related, supplemental additions of an oxygen scavenger such as sodium sulfite should be made to the system

  • Section 1 Body: 
    • Highly effective foam controller
    • Defoams mud containing fresh water or sea water
    • Effective in reducing or eliminating gas cuttings
    • Helps stabilize pump pressure by removing trapped air and gas
    • Combats mild to severe foaming
    • Dispersible in silicone water and brine but insoluble in oil
  • Section 1 Body: 
    • A very effective thinner in carbonate/bicarbonate and sulphate contaminated muds where conventional thinners have little or no effect
    • Stable up to 175°C (347°F)
    • Cost-effective
    • Environmentally acceptable
    • Effectiveness has been proven in fresh water gel, K+ polymer, gyp and saturated salt muds up to 10,000 mg/L Cl
    • Alternative to heavy metal lignosulphonates, lignites and tannis
  • Section 1 Body: 
    • A very effective thinner in carbonate/bicarbonate and sulphate contaminated muds where conventional thinners have little or no effect
    • Stable up to 260°C (500°F)
    • Will also function as a gel suppressor to help reduce the fluid loss in most mud systems
    • Cost effective and effective at any pH
    • Environmentally acceptable
    • Effectiveness has been proven in fresh water gel, K+ polymer, gyp and saturated salt muds
    • Alternative to heavy metal lignosulphonates, lignites and tannins
  • Section 1 Body: 
    • Promotes solids setting and reduces pump pressure
    • Improved sampling through cleaner samples and more distinct cuttings
    • Increased penetration rates
    • Reduced hole friction and torque
    • Reduced bit balling, mud rings and cake build-up on drill strings
    • Reduced wear on surface mud system expendables
    • Increased bit life
  • Section 1 Body: 
    • Emulsion stability and fluid loss control
    • Good oil wetting performance
    • Good PV/YP ratio for the emulsified fluid

     

  • Section 1 Body: 
    • Ideal for combating mild to severe foaming
    • Can be premixed as an anti-foaming agent in fluids where vigorous agitation is required or with products that are known to have foaming tendencies
    • Easy to mix and works quickly
    • Compatible with other commonly used mud additives
  • Section 1 Body: 
    • Excellent biodegradability (>60% by DOC Method) essentially non-toxic
    • Chloride free
    • Non-oil wetting
    • Non-foaming
    • Multiple absportion sites
    • Normal concentration used is 3-5 L/m³ by volume
  • Section 1 Body: 

    Earth Pro Liquipac should be added slowly (30-40 minutes per pail) through the hopper or at point of agitation. Caution: It is slippery when spilt on the floor. See MSDS for handling and disposal.

  • Section 1 Body: 

    When the solids content of oil-based fluids (high density or build-up of drilled solids) develop adverse effects on rheology Earth Pro OMD will provide a decrease in yield point and gel strengths improving the flow properties of the fluid.

    Rates of addition will vary based on the severity of the solids build-up. Typical rates are between 2 – 8 L/m³.

  • Section 1 Body: 

    Earth Pro Poly-Xan disperses in water with moderate agitation. Continued mixing provides a smooth viscous fluid. It should be added slowly to the active system to avoid lumping or fish-eyes, which may occur if the polymer is not allowed to properly disperse.

  • Section 1 Body: 

    Earth Pro Poly-Xan L disperses in water with moderate agitation. Continued mixing provides a smooth viscous fluid. It should be added slowly either through the hopper to allow proper dispersion.

  • Section 1 Body: 

    Earth Pro Red Dye comes in two water-soluble packets (1kg each) sealed in a ziplock plastic bag. After removing from the outer ziplock bag, the pigments can be added directly to the displacement fluid. A small amount of agitation will keep the colorant suspended.

    Normal safety precautions should be used for handling dusty materials to prevent ingestion or eye irritation. Care should be taken to avoid contact with skin and clothing, as pigment tends to color everything it touches.

  • Section 1 Body: 

    Add Earth Pro Torq-Glide at the pump suction for reduction of torque and drag. It can be added as required to improve the sliding of the drill string when building or maintaining hole angle. Skin and eye protection should be observed.

  • Section 1 Body: 
    • Provides emulsion stability
    • Does not require lime for activation (quick action)
    • Improves rheological properties (lowers plastic viscosity)
    • Not effected by electrolyte type or concentrations of water phase
  • Section 1 Body: 

    Oilfield: Mix directly through the mud hopper at no faster than 4-6 minutes per sack. Avoid breathing dust. It is advisable to use a dust mask and eye protection while mixing all powdered products.

    Cementing: In muds with a salinity of greater than 3500 mg/L, the bentonite must be first prehydrated in fresh water. Avoid breathing dust. 

  • Section 1 Body: 

    For maximum effectiveness Earth Pro XL-Defoamer should be added directly to the fluid system as close to the point of foaming (e.g. shale shaker) as possible. It may also be sprayed over the fluid through a wash gun diluted in a mineral oil mixture if necessary (e.g. over mud tanks).

    Earth Pro XL-Defoamer may cause irritation to the skin and eyes. Use rubber gloves, rubber apron, mask and eye protection when using this and other liquid mud additives.

    In case of skin contact, wash with water as required. In case of eye contact, wash with water for at least fifteen minutes and seek medical attention if necessary. Although stable, do not store Earth Pro XL-Defoamer near strong oxidizing agents.

  • Section 1 Body: 

    Use 0.06-0.1 kg/m³ active ingredients based on the total volume of the drilling fluid system until bacteria control is achieved. A periodic dosage of 0.01-0.025 kg/m³ should be made to maintain bacterial control.

  • Section 1 Body: 
    • Excellent solubility in cold conditions
    • Carefully controlled, low molecular weight
    • Saves energy costs and unnecessary delays associated with conditioning the mud
    • Improved dispersibility control over conventional PHPA’s
    • Provides added lubrication and lowers fluid loss
    • Improves filter cake quality and is readily dispersible with no formation of fish eyes
    • Environmentally friendly
  • Section 1 Body: 

    Alcomer 120L OS should be added to Extra High Yield Bentonite or Tru-Bore slurries to improve hole cleaning and hole stability. For this application, use a concentration of 0.5 – 1.5 quarts/100 gal.

    Alcomer 120L OS may be used to formulate a clay-free low solids mud to stabilize water sensitive formations, reduce torque and pump pressure, and increase hole stability. For this application, use a concentration of 1.0-2.0 quarts/100 gal.

  • Section 1 Body: 

    Alcomer 755 / Zetag 7557 should be added through a chemical barrel at the flow line or injected directly into a centrifuge from a premixed polymer tank, usually in a 0.5% stock solution.

    Add an appropriate organic or inorganic coagulant before adding Alcomer 755 / Zetag 7557. It can also be used for fluid clarification when added at the centrifuge in sumpless drilling operations.

  • Section 1 Body: 

    Alcomer 758 / Zetag 7587 should be added through a chemical barrel at the flow line or injected directly into a centrifuge from a premixed polymer tank, usually in a 0.5% stock solution.

    Add an appropriate organic or inorganic coagulant before adding Alcomer 758 / Zetag 7587. It can also be used for fluid clarification when added at the centrifuge in sumpless drilling operations.

  • Section 1 Body: 

    Mix directly into the hopper at 30 minutes per sack or add (with agitation) to a chemical barrel or polymer-mixing tank. Avoid mixing too rapidly. A mask and goggles should be worn to prevent inhalation of dust and contact with eyes.

    Alkapam A-1103D becomes very slippery when coming in contact with water. A spill should be cleaned up with an absorbent material.

  • Section 1 Body: 
    • Highly effective defoamer for all types of water based mud systems
    • Decreases surface and internal foam
    • Effective in low concentrations
    • Stabilizes rheological measurements
    • Easily prepared and used
  • Section 1 Body: 

    Aquabloc HT mixes readily and may be added to a mud system through the hopper at 10-15 minutes per sack. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 

    Wet Screen Analysis

    • 3% residue (max) on US Sieve #200 (74 microns)
    • 5% residue (max) on US Sieve #325 (44 microns)
    • Soluble Alkaline Earths as Calcium: 250 mg/L (max)
  • Section 1 Body: 

    Weight formula for Cal Carb 0:

    Cal Carb 0 (lb/bbl) equals 945(W2 - W1) divided by 22.5 - W2

    Where:

    • W1 = initial mud weight in ppg
    • W2 = desired mud weight in ppg
  • Section 1 Body: 

    Weight formula for Cal Carb Poultry Grit

    Cal Carb Poultry Grit (lb/bbl) equals 945 (W2-W2) divided by 22.5-W2

    Where: 

    W1 = initial mud weight in ppg

    W2 = desired mud weight in ppg

  • Section 1 Body: 

    Weight formula for Cal Carb Supercal

    Cal Carb Supercal (lb/bbl) equals 945 (W2 - W1) divided by 22.5 - W2

    Where: 

    W1 = initial mud weight in ppg

    W2 = desired mud weight in ppg

  • Section 1 Body: 

    Calcium Chloride Powder is extremely corrosive. Utilize normal precautions for employee protection when handling chemical products. Use of appropriate respirator, gloves, goggles, and apron is recommended for employee comfort and protection.

  • Section 1 Body: 

    Calcium Nitrate can be added through the hopper or pre-dissolved in water in the chemical barrel prior to being added. Note that in the presence of excess hydroxide concentration, ammonia gas will be liberated.

    Ammonia gas will irritate the nose, throat and respiratory system and can cause eye injury. It is advisable to use a dust mask and eye protection while mixing all powdered products. Store securely away from combustible materials and reducing agents.

  • Section 1 Body: 
    • Economical resource of hydroxyl ions to control pH levels
    • Concentrated chemical that is effective at small treatment levels
    • Can be used in most water based drilling fluids
    • Reduces corrosion of steel exposed to drilling fluids
  • Section 1 Body: 
    • Helps to solubilize acidic compounds
    • Assists in reducing the corrosivity of water based drilling fluids
    • Increases the hydration rate of dispersed clays
    • Restrict the solubility of lime, in lime based muds
  • Section 1 Body: 

    Cellophane is used to provide a sealing agent supplement to other lost circulation material in water based drilling muds. It is also a basic additive in cement slurries, providing a matting effect in the control of losses. Typical rates of addition up to 2% by wt. cement are used as a preventative measure.

  • Section 1 Body: 
    • Environmentally compatible
    • Temperature tolerance in excess of 149°C
    • Soluble in systems of high salinity, high hardness and at any pH level
    • Maximum deflocculation at low concentrations
    • Works in most water-based mud formulations
  • Section 1 Body: 

    Chemul RHM is used to help increase low shear rheological properties. It helps in the suspension and transport of cuttings in highly deviated and horizontal wellbores. Chemul RHM helps reduce barite sag or settling in directional wells.

    Although the use range may vary with well conditions the general recommended treatment is (0.7 – 4.2 L/m³) of Chemul RHM.

  • Section 1 Body: 
    Citric Acid 99.5% min Water 1.0% max
    Sulphated Ash 0.1% max Calcium  200 mg/L max
    Chloride  50 mg/L max Iron  50 mg/L max
    Oxalate  350 mg/L max Sulphate  150 mg/L max
    Arsenic  3 mg/L max Heavy Metals  10 mg/L max
  • Section 1 Body: 
    • Helps increase mud density
    • Helps control formation pressure
    • Helps stabilize the borehole
    • Cost-effective weighting agent
  • Section 1 Body: 

    Drilstar HT mixes readily. It may be added through the hopper at rates of 5-10 minutes per sack when required. It is advisable to use a dust mask while it is being mixed.

  • Section 1 Body: 
    • Controls fluid loss
    • Eliminates fisheyes in mud systems
    • Promotes fragile gels
    • Works well at any salinity
    • Produces thin, slick, tough filter cake
    • Increases resistance of clay mud to contamination
    • Retards drilled solids build-up by inhibiting cuttings disintegration
    • Reduces friction and can reduce ECD
    • Environmentally compatible
  • Section 1 Body: 

    Emul-Break can be added directly to the mud on surface or through the mixing system. Avoid inhalation of vapors. Do not get on skin, in eyes or on clothing. Keep container closed when not in use. Wear suitable protection for eyes and skin when handling. Use with adequate ventilation. Avoid contact with incompatible materials.

    Store in cool, dry, well-ventilated area away from sources of heat, ignition and sparks. Use proper grounding techniques if product is classed as flammable or combustible. Avoid using natural rubber, use neoprene.

    *Caution*: Emul-Break is a surface-active demulsifier. It is a respiratory and digestive tract irritant that should be handled with care.

  • Section 1 Body: 

    Add directly down the annulus. Avoid breathing dust. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 
    Application Concentration (lb/100 gal)
    Make up fluid (with polymer addition) 10-15
    Normal drilling 15-25
    Unconsolidated formations 25-40
    Lost circulation 35-50
  • Section 1 Body: 

    FiberFluid can be mixed through the hopper or at any point of agitation in the mud system. Wear a mask and goggles when mixing to prevent dust inhalation and contact with eyes.

  • Section 1 Body: 

    Gilsonite is relatively stable and of low hazard. However it should not be stored or used near strong oxidizing agents such as chlorates, nitrates or peroxides. Excessive dust is subject to combustion or explosion upon contact with spark or open flame. Use good industrial hygiene practice to avoid eye and excess skin contact. Wear a protective dust mask and goggles when handling and mixing.

  • Section 1 Body: 

    Glass Beads should be added directly through the mixing hopper. It is advisable to use a dust mask and eye protection while mixing all powdered products.

    Note: Glass Beads will have the same effect as ball bearings on any hard surface. Post warning signs if spilled and sweep up immediately.

  • Section 1 Body: 

    Glide Graph is added to the mud system through the mud-mixing hopper. Because it is extremely fine, it is recommended that a dust mask and goggles be worn while the graphite is being mixed.

    Note: Glide Graph will have the same effect as ball bearings on any hard surface. Post warning signs if spilled and sweep up immediately.

  • Section 1 Body: 

    HSO 0600G can be added directly to the mud system or metered into the system with a positive displacement pump. HSO 0600G is a combustible liquid, avoid heat, sparks and open flames. Avoid breathing vapor and contact with eyes, skin or clothing. Keep container closed when not in use. Use this product in a well-ventilated area.

  • Section 1 Body: 

    Mix directly through the mud hopper. Addition of Caustic Soda (or equivalent) will be required to maintain the pH at 9.0 or higher. It is advisable to use a dust mask and other approved protection apparel while mixing all powdered products.

  • Section 1 Body: 

    Premix in water in the chemical barrel and add slowly to the system. Excess lime treatment will cause thickening of a bentonite based mud system.

    Hydrated Lime gives off heat when mixed with water. Strong solutions have a high pH and may cause skin burns. Avoid contact with skin and eyes and wear protective clothing and goggles when handling and mixing. Store in a dry place.

  • Section 1 Body: 

    Mix directly into the hopper at 30 minutes per sack or add (with agitation) to a chemical barrel or polymer-mixing tank. Avoid mixing too rapidly. A mask and goggles should be worn to prevent inhalation of dust and contact with eyes.

    Hyperdrill AF 204RD becomes very slippery when wet. A spill should be cleaned up with an absorbent material.

  • Section 1 Body: 

    Hyperdrill AF 207RD is added either at the flow line to promote solids settling in the sump or at a point prior to mechanical separation equipment.

    A 0.5% stock solution is most commonly prepared using (1) one viscosity cup of polymer per 50 gallons of fresh water. It must be mixed slowly to prevent “humping” and the subsequent loss of polymer at the shaker screen.

    Hyperdrill AF 207RD becomes very slippery when it comes in contact with water. A spill should be cleaned up with an absorbent material. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 
    • Shale stabilization/inhibition
    • Minimized viscosity increases
    • Added lubricity and lower fluid loss
    • Improved filter cake quality
    • Readily dispersible with no formation of fisheyes.
    • The solid grade form is more cost effective than liquids
    • Environmentally friendly
  • Section 1 Body: 

    Mix Hyperdrill CP 905H slowly into a chemical barrel or polymer mixing tank and allow product to hydrate (approximately 1 hour). Avoid mixing too rapidly. Wear a mask and goggles to prevent dust inhalation and contact with eyes.

    Hyperdrill CP 905H becomes very slippery when it comes in contact with water, therefore spills should be cleaned up with an absorbent material instead of water.

  • Section 1 Body: 

    Mix Hyperdrill CP 911 slowly into a chemical barrel or polymer mixing tank and allow product to hydrate (approximately 1 hour). Avoid mixing too rapidly. Wear a mask and goggles to prevent dust inhalation and contact with eyes.

    Hyperdrill CP 911 becomes very slippery when it comes in contact with water, therefore spills should be cleaned up with an absorbent material instead of water.

  • Section 1 Body: 

    Mix Hyperdrill CP 944 slowly into a chemical barrel or polymer mixing tank and allow product to hydrate (approximately 1 hour). Avoid mixing too rapidly. Wear a mask and goggles to prevent dust inhalation and contact with eyes.

    Hyperdrill CP 944 becomes very slippery when it comes in contact with water, therefore spills should be cleaned up with an absorbent material instead of water.

  • Section 1 Body: 

    Mix Hyperdrill NF 301H slowly into a chemical barrel or polymer mixing tank and allow product to hydrate (approximately 1 hour). Avoid mixing too rapidly. Wear a mask and goggles to prevent dust inhalation and contact with eyes.

    Hyperdrill NF 301H becomes very slippery when it comes in contact with water, therefore spills should be cleaned up with an absorbent material instead of water.

  • Section 1 Body: 

    Kelzan XCD disperses in water with moderate agitation. Continued mixing provides a smooth viscous fluid. Kelzan XCD should be added slowly to the active system to avoid lumping or fish-eyes, which may occur if the polymer is not allowed to properly disperse.

  • Section 1 Body: 
    • Acid soluble, non-fermenting and non-corrosive
    • Temperature stable, inert & non-damaging
    • Compatible with all drilling and completion fluids
    • Nodulized structure and surfactant coated for easy mixing
  • Section 1 Body: 

    Mix Magnafloc 430 / Zetag 7692 slowly into a chemical barrel or polymer mixing tank and allow product to hydrate. Avoid mixing too rapidly. Wear a mask and goggles to prevent dust inhalation and contact with eyes.

  • Section 1 Body: 
    • Readily available, economical and requires low treatment levels
    • Increases temperature range of polymers
    • Provides effective buffering action in high hardness and saturated salt brines
  • Section 1 Body: 

    Mix directly in the active system or pumped as part of a slurry or pill. Utilize normal precautions and protection when handling chemical products. Utilize appropriate respirator, gloves, goggles and apron.

  • Section 1 Body: 

    Solution preparation in pH neutral waters is rapid; however, attention to water temperature is necessary as cold waters require a much longer hydration time.

    In high pH waters Natrosol Hi-Vis will dissolve much faster regardless of water temperature, however this is not recommended. Laboratory testing is recommended for loading confirmation and application. This HEC is compatible in fresh water, sea water, and salt solutions up to
    saturation.

    Store in a cool, dry place away from incompatible materials. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 

    Bentonite can be added up to 20% by volume by weight of cement. Above 6%, the addition of a dispersant is usually necessary to reduce the slurry viscosity and gel strength.

    As shown in the table below, the slurry density decreases and the yield increases quickly with bentonite concentrations. High bentonite concentrations tend to improve fluid loss control; however the compromise is higher cement permeability and lower compressive strength. Naturalgel can also be used as an extender at elevated temperatures.

    Bentonite

    %

    Slurry Weight

    kg/m³

    Mix Water

    m³/ton

    Slurry Yield

    m³/ton

    0 1893.3 0.440 0.757
    2 1785.4 0.547 0.870
    4 1713.5 0.653 0.984
    6 1665.6 0.759 1.097
    8 1593.7 0.867 1.218
    10 1569.7 0.971 1.323
    12 1521.8 1.078 1.440
    16 1461.9 1.291 1.880
  • Section 1 Body: 

    Mix directly into mud hopper. Avoid mixing too rapidly. A mask and goggles should be worn to prevent inhalation of dust and contact with the eyes. Fresh air ventilation should be provided in the mixing area.

  • Section 1 Body: 
    • Temperature stability exceeding 200°C
    • Calcium tolerance to 75,000 ppm
    • Magnesium tolerance to 100,000 ppm
    • Complete tolerance to sodium and potassium chloride
    • Stabilization of rheological properties
    • Minimal effect on viscosity
    • Improved filter cake quality
    • Thermal stabilization of PAC and CMC to at least 154°C
    • Non-damaging to the formation
    • Low replacement levels
    • Environmentally safe
  • Section 1 Body: 
    • Temperature stability exceeding 200°C
    • Calcium tolerance to 50,000 ppm
    • Stabilization of rheological properties
    • Improved filter cake quality
    • Works at any pH above 7.0
    • Non-damaging to the formation
    • Low replacement levels
    • Environmentally safe
  • Section 1 Body: 

    Potash mixes readily in water and can be mixed directly through the hopper. Avoid breathing dust while mixing. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 

    Prima-Seal is a lost circulation material, which may be used by itself or in conjunction with other lost circulation additives.

    Generally, its use may be based on the following criteria:

    • Prima-Seal Coarse - seals large fractures, requires large jets (16 mm or larger) or an open watercourse.
    • Prima-Seal Medium - seals fine fractures and porous zones, should be used with jets larger than 10.3 mm.

    Depending on the severity, the total lost circulation material concentration may be as high as 75.0 kg/m³ of whole mud.

  • Section 1 Body: 

    Storage Precaution: Calcium oxide on its own will not burn. However, bulk powder may heat spontaneously when it comes into contact with water. Humidity or contact with water may generate sufficient heat to ignite flammable and combustible materials. In addition, the reaction of calcium oxide with a number of commonly encountered materials can generate sufficient heat to ignite nearby combustible materials. Store in a dry place.

    Handling Precaution: Lime gives off heat when mixed with water. Due to its reactivity with water, all precautions should be taken to avoid skin or eye contact. It will cause severe burns to the eyes and skin. Wear goggles and protective clothing when handling this product.

  • Section 1 Body: 

    It is advisable to use a dust mask and eye protection while mixing all ground and powdered products.

  • Section 1 Body: 

    Avoid inhalation of vapors. Do not get on skin, in eyes or on clothing. Keep container closed when not in use. Wear suitable protection for eyes and skin when handling. Use with adequate ventilation. Avoid contact with incompatible materials. Store in a cool, dry, well-ventilated area.

  • Section 1 Body: 

    It is advisable to use a dust mask and eye protection while mixing all powdered products Avoid skin contact and do not inhale dust or allow contact with eyes. Do not ingest.

  • Section 1 Body: 

    Sea Mud is mixed through the mud hopper and requires more shear (than bentonite) in order to attain its maximum yield. This product contains crystalline silica known to be carcinogenic to humans.

    It is not uncommon to observe an increase in viscosity as a result of the high shear rate experienced by the drilling mud as it passes through the bit nozzles.

    Consequently, although Sea Mud may be mixed as rapidly as 5 minutes per sack, allowance must be made for the increased viscosity arising from circulation through the bit.

    It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 

    Remove Soap Stick FS-16 from paper tube before dropping in well. Practice reasonable caution and personal cleanliness. Avoid skin and eye contact. Avoid ingestion. Store in sealed containers in a cool, dry area away from oxidizers. Keep away from heat and open flame. Material is slippery when wet.

  • Section 1 Body: 

    Soda Ash is added directly through the mud-mixing hopper. It should be stored in a cool, dry place. Avoid contact with strong acids in confined areas. Avoid inhalation of dust or contact with the eyes. If contact is made, rinse thoroughly with water for 15 minutes and seek medical attention if necessary. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 
    • Non-hazardous and widely available
    • An effective, economic treatment for calcium removal
    • Quickly reduces soluble calcium levels and fluid pH
    • Easy to mix and use - soluble in water
    • Safe to use - noncombustible
  • Section 1 Body: 

    Appearance: Green-yellow liquid

    Specific Gravity: 1.17 @ 20°C

  • Section 1 Body: 

    Sodium Sulfite - Catalyzed readily decomposes. It is usually added at a concentration of one to two sacks to a barrel of water. After mixing, the mixture is covered with a 10.0-15.0 cm blanket of mineral oil to minimize absorption of oxygen from the air. It is then slowly pumped into the central stream of the mud pump suction with an injection pump. Wear suitable protection for eyes and skin when handling. Use in areas with adequate ventilation.

  • Section 1 Body: 

    Staflo (Regular and Exlo Supreme) should be stored in a dry location. In order to avoid lumping, it is added to the mud system through the hopper at 30-40 minutes per sack. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 
    • Microtox threshold that exceeds normal use concentrations
    • More efficient than regular starches
    • Nearly as efficient as cellulosics at controlling fluid loss
    • Non-fermenting and requires no biocide under normal conditions
    • Stable against drilling fluid enzyme contamination that could result in viscosity breakdown
    • Enhances shear thinning
  • Section 1 Body: 

    As with most highly reactive products dry Sulphamic Acid should always be added to water, rather than the opposite, to prevent a violent reaction from occurring.

    At room temperature, diluted aqueous Sulphamic Acid is stable for a long period of time but hydrolysis occurs at elevated temperatures.

    Rubber gloves, full clothing, rubber apron and eye and face protection are recommended when mixing to avoid contact with unprotected skin. Contaminated clothing should be laundered before reuse.

  • Section 1 Body: 

    T-352 Biocide is corrosive and will cause irreversible eye damage. Wear suitable protection for eyes and skin and ensure there is adequate ventilation in the mixing area.

  • Section 1 Body: 

    It is advisable to use a dust mask and eye protection while mixing all powdered products. Avoid skin contact and do not inhale dust or allow contact with eyes. Do not ingest.

  • Section 1 Body: 

    Torq-Trol W can be added directly to the active mud system at any point of agitation.

  • Section 1 Body: 

    For applications such as sweeps or pills, concentrations as high as 85 kg/m³ may be required.

    Ultra Seal-C is a coarser grind material effective in situations where whole mud losses are prevalent. Recommended usages are the same as Ultra Seal-XP and a combination of Ultra Seal-XP and Ultra Seal-C may be necessary to provide a broader particle size distribution.

    Ultra Seal-Plus is a combination of Ultra Seal-XP and Ultra Seal-C in addition to a larger proprietary sealing agent for total loss circulation. Concentrations of 55.0-170.0 kg/m³ mixed in 15 m³ pills are recommended for spotting across the loss zone.

  • Section 1 Body: 

    As a cure for lost circulation, mix Walnut into the mud or in a lost circulation pill in concentrations of 10.0-30.0 kg/m³. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 

    Xanvis can be easily mixed through the mud hopper. Care should be taken, as with most polymers, to avoid mixing too quickly to prevent any potential for lumping. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 

    Zinc Carbonate can be added directly to the mud hopper. It is advisable to use a dust mask and eye protection while mixing all powdered products.

  • Section 1 Body: 

    Typical use on a small scale is for dump-bail treatments. The product is batched in small volumes according to the following blend table, and “dumped” down the wellbore using conventional rig equipment. After a period of time the cement sets, providing a small, hard plug in the problem area.

     

    Approximate Working Time (Hrs:min at BHT)

    Bag Size (kg) Water Req. (liters) Slurry Yield (liters) Density (kg/m³) 20°C 30°C
    20 8.8 15.2 1900 > 6:00 5:00
    Comprehensive Strength, MPa (18, 16, 24 hrs)* 0.1, 2.5, 10.0 0.7, 4.5, 11.0

    *Note: Strengths are for reference only. Actual values may vary due to changing wellbore conditions, variations in density, and water quality. Samples should be taken at the time of treatment and observed at estimated wellbore temperature for strength development.

    At temperatures below 30°C, calcium chloride can be added in a small amount, to accelerate the set time. Typical dosage is 0.5-1% w/w, depending on well depth, and wellbore temperature. Slurry viscosity and working time will be reduced proportionately.

    Exercise extreme care in the addition of calcium chloride. In itself calcium chloride is a corrosive material, and will cause skin burns. If poorly mixed, it can cause excessive heat of hydration, potentially leading to a flash set of the cement.

  • Section 1 Body: 

    Earth Pro Red Dye comes in two water-soluble packets (1 Kg each) sealed in a ziplock plastic bag. After removing from the outer ziplock bag, the pigments can be added directly to the displacement fluid. A small amount of agitation will keep the colorant suspended. Normal safety precautions should be used for handling dusty materials to prevent ingestion or eye irritation. Care should be taken to avoid contact with skin and clothing, as pigment tends to color everything it touches.

  • Section 1 Body: 

    Earth Pro Slurry Master is a toxic material. Store in a cool dry place, away from incompatible materials. It contains alcohol ethoxylates and mineral oil, which may cause irritation to sensitive skin areas. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 
    • Overcomes high temperature degradation (when wellbore temperatures exceed 115°C)
    • Best suited for temperatures ranging from 10-35°C for placing plugs
    • Meets ERCB Directive
    • Typically used on a small scale for dump-bail treatment
  • Section 1 Body: 

    Always store Earth Pro FLA-6 in a dry location. It will be stable at elevated temperatures, although such conditions are not recommended under any circumstances. Use good industrial hygiene to avoid eye contact or inhalation. Wear appropriate safety equipment when handling and mixing.

  • Section 1 Body: 
    • Stabilizes the cement slurry
    • Helps set deep plugs at extreme temps.
    • Used in wireline drilling
    • Can be used for dump-bail treatments
  • Section 1 Body: 

    RB Catalyst must always be added to the mixing water FIRST. Failure to do so may result in shortened working time leading to potential plug failure. Always keep Earth Pro ResinBond pail and RB Catalyst containers closed until use. Avoid contact with water or excessive moisture. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 
    Temp Density Working Time Setting Time Time to 500 psi 24 Hr Strength
    °C kg/m³ Hr Est. Hrs Hr:min psi
    60 1830 2.5-3.0 4.75 10:30 1000
    70 1830 2.5-3.0 4.25 10:00 1050
    80 1830 2.5-3.0 4.00 9:00 1100
    90 1830 2.5-3.0 4.00 8:30 1150
  • Section 1 Body: 

    Typical application is in the range of 0.05% to 1.0% wt. See table below for expansive effect:

    % Expansion Volume at 27°C
    Aluminum Curing Pressure
    % 0 kpa 20685 kpa
    0 - -
    0.05 12 0.7
    0.10 18 0.9
    0.25 24 1.6
    0.50 57 2.6
    1.00 57 5.2

    Expanding cements prepared by the use of aluminum powder have found use in shallow well applications, especially where the problem of gas migration occurs.

  • Section 1 Body: 

    Barite (20.4μ) has two major functions in cementing operations:

    Weighting Agent - Used where high pore pressures, unstable wellbores and deformable plastic formations are controlled by high hydrostatic pressures. Slurries with densities of up to 2280 kg/m³ (19.0 lbs/gal) can be prepared with Barite to control such wells.

    Plugs - A Barite plug will seal the wellbore due to the high hydrostatic head pressure of the slurry. In addition the Barite slurry has a high filtrate loss causing it to dehydrate rapidly forming a plug. The viscosity and yield point of the Barite slurry must be kept low if the Barite is to settle and form a plug.

  • Section 1 Body: 

    Follow good housekeeping procedures, avoid creating dust, store in a cool dry place. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 

    A table outlining the general effect of calcium chloride upon the thickening time and compressive strength is presented below. Results are based on an 1872 kg/m³ API Class A cement slurry. 

    Thickening Time

    API for Casing Cement Test (Hr:min) API for Squeeze Cementing Test (Hr:min)
    Calcium Chloride (%) 300M Well 600M Well 1200M Well 300M Well 600M Well 1200M Well
    0.0 4:40 3:63 2:25 3:30 2:49 1:52
    1.0 1:55 1:30 1:04 1:30 1:20 0:54
    3.0 0:50 0:47 0:41 0:48 0:43 0:37

    Compressive Strengths (KPA)

    Pressure Atmospheric Atmospheric Atmospheric
    Temp 15°C 27°C 35°C
    CaCl2 (%) 6 Hrs 12 Hrs 24 Hrs 6 Hrs 12 Hrs 24 Hrs 6 Hrs 12 Hrs 24 Hrs
    0 138 483 6,481 517 2,793 13,307 1,620 7,343 18,685
    1 3,172 5,413 15,790 5,861 10,618 27,442 8,067 16,272 30,717
    3 5,206 6,585 16,686 7,550 11,549 27,442 8,446 16,030 31,372
  • Section 1 Body: 

    Storage Precautions: COILSav is flammable. Avoid any exposure to excessive heat, sparks or open flame. Avoid excessively humid conditions. Store in a cool dry place away from incompatibles. Handling Precautions: Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 

    Oilfield Cementing: Typical concentration can vary from 0.5% to 2% BWOC. CRM-22B has a synergistic effect on slurry fluid loss control. It can be used to disperse weighted slurries up to 2250 kg/m³, but addition of this product to low-density slurries may result in a large excess of free water and particle segregation.

    Excessive dispersant loading can lead to slurry disintegration, severely retarded set and possible bridging off mid-job. This is typical of cement
    dispersants, and laboratory testing should be carried out before recommending for field use. CRM-22B is not recommended at temperatures exceeding 60°C.

  • Section 1 Body: 

    Daxad 19 is a highly effective dispersing and thinning agent for high solids, aqueous dispersions and slurries. Reduced viscosity and/or lower water requirements are some of the benefits of using Daxad 19 in cement formulations.

    By reducing the cement slurry viscosity, much lower pump rates and friction pressures result. Or, with reduced water, higher compressive strength cements can be pumped without affecting the cement viscosity.

    Typical addition rates vary from 0.2 to 0.5% by weight of cement, but can run as high as 1.5-2% for high density (or whipstock type) slurries.

  • Section 1 Body: 

    Earth Pro Defoamer Powder is non-hazardous. Store in a cool dry place and away from incompatible materials. Earth Pro Defoamer Powder components may cause irritation to sensitive skin areas. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 

    DFR-5 can be prehydrated or dry blended in cement. It contains no hazardous ingredients. Normal safety precautions should be used for handling dusty materials to prevent ingestion or eye irritation.

  • Section 1 Body: 

    Wear a mask and goggles while mixing Guar Gum HP 4501P to prevent dust inhalation and contact with eyes. Guar Gum HP 4501P becomes very slippery when it comes in contact with water, therefore spills should be cleaned up with an absorbent material instead of water.

  • Section 1 Body: 

    Appearance: Tan colored viscous liquid

    Specific Gravity: 1.07-1.08

    Flash Point: >93°C (closed cup)

    Pour Point: -30°C

  • Section 1 Body: 

    Industrial Moulding Plaster is typically dry blended in the cement. For further handling and safety instructions consult Material Safety Data Sheet.

  • Section 1 Body: 

    LTR is most often dry blended in cement. LTR should be stored in a dry place to prevent caking as a result of absorption of moisture. As with all organic materials, caution is advised when storing or handling near strong oxidizing agents such as chlorates, nitrates or peroxides. Avoid excess dust build up as contact with a spark or open flame could result in combustion or explosion. Use good industrial practice to avoid eye and excess skin contact. Wear a protective dust mask and goggles when handling and mixing.

  • Section 1 Body: 

    Metso 66’s unique formulation reduces or eliminates the need for transport or handling of any flammable or hazardous fluids on the rig site (diesel fuel, solvents, and other related components).

    By using Metso 66, disposal costs are further reduced. The recommended loading is 5-6 bags of Metso 66 per m³ of water (fresh or sea water). Laboratory testing is recommended to determine the precise loading for general use or specific well situations. Fluid contact time within the wellbore is most important.

    Sufficient fluid volume with the recommended Metso 66 loading is necessary for complete removal of oil-based materials and reversal to a water-wet condition. This volume will vary depending on depth, and hole-pipe configuration. Metso 66 can also be used as a spacer for water- based mud removal to improve cement-to-pipe and cement-to-formation bonding.

  • Section 1 Body: 

    Sodium Metasilicate

    (%BWOC)

    Slurry Density

    (kg/m³)

    Slurry Yield

    (m³/ton)

    Water

    Compressive Strength,

    24hr (kpa)

    Thickening Time
    (Hr:min)
    (m³/ton) % 50 60
    0.0 1893 0.929 0.537 44 32889 36613 +4:05 3:10 2:35 ---
    0.15 1737 1.116 0.732 60 12039 15500 3:20 2:37 2:10 ---
    1.0 1737 1.116 0.732 60 13073 14997 2:40 1:34 --- ---

    0.25

    1678 1.221 0.830 68 9791 10411 --- --- --- ---
    1.0 1678 1.221 0.830 68 11308 11880 --- --- --- ---
    0.5 1618 1.342 0.952 78 6523 8812 --- 3:30 2:10 ---
    2.0 1618 1.342 0.952 78 9150 9791 1:53 1:28 --- ---
    0.5 1558 1.488 1.100 90 5171 6392 --- --- --- ---
    2.0 1558 1.488 1.100 90 827 7447 --- --- --- ---
    0.75 1498 1.658 1.270 104 2634 4309 +5:00 +5:00 +5:00 +5:00
    2.0 1498 1.658 1.270 104 4365 4502 +5:00 1:43 --- ---
    1.0 1438 1.876 1.490 122 1827 2620 --- --- --- ---
    2.0 1438 1.876 1.490 122 2896 3517 --- --- --- ---
    1.5 1378 2.175 1.795 147 1014 1586 +5:00 +5:00 +5:00 +5:00
    3.0 1378 2.175 1.795 147 1869 1993 +5:00 1:27 --- ---
    2.0 1318 2.588 2.199 180 703 1207 --- --- --- ---
    3.0 1318 2.588 2.199 180 1000 1414 --- --- --- ---
  • Section 1 Body: 

    Store in a cool, dry place away from incompatible materials. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 

    Microspheres are compatible with all classes of cement but must be dry blended and not premixed in the water. Use good industrial hygiene practice and wear goggles and a dust mask when handling the material.

  • Section 1 Body: 

    OGC-60 is not known to be toxic. Normal precautions for handling dusty products should be used for handling this product.

  • Section 1 Body: 

    Store in a cool dry place, away from incompatible materials. Sweep any spilled material into disposal container. Do not wet area, as material becomes slippery when moistened. Avoid inhaling or ingesting dust. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 

    The table below details the approximate amount of Plug Sand required to fill one (1) vertical meter of casing or drill pipe:

    Casing O.D. (mm) Plug Sand (kg required to fill 1 meter vertical)
    139.7 19
    177.8 32
    219.1 52
    222.3 49
    244.5 64

    Note: The weight of Plug Sand indicated in the above table is provided only as a guideline. Average casing weight was selected from typical oilfield tables for casing capacities, and may vary from your particular situation. To calculate the amount of Plug Sand required, the following formula can be used:

    Amount of Sand Req (kg)= Casing Capacity (m³/meter) X 1650 kg/m³ (Bulk density of Plug Sand)

  • Section 1 Body: 

    Potash mixes readily with water and can be mixed directly into the water. The presence of salt depresses the ability of bentonite to extend a cement slurry. For this reason pre-hydration of the bentonite is necessary when combining salt in a bentonite/cement blend. Avoid breathing dust while mixing.

  • Section 1 Body: 

    Salt mixes readily with water and can be mixed directly into the water.

  • Section 1 Body: 

    Silica Fume (Densified) is very stable and is not susceptible to fire, explosion or decomposition. The finely divided dust may cause eye and respiratory irritation. Use good industrial hygiene practice and wear goggles and a dust mask when handling the material.

  • Section 1 Body: 

    Silica Fume (Undensified) is very stable and is not susceptible to fire, explosion or decomposition. The finely divided dust may cause eye and respiratory irritation. Use good industrial hygiene practice and wear goggles and a dust mask when handling the material.

  • Section 1 Body: 

    Avoid inhalation of dust or contact with the eyes.

  • Section 1 Body: 

    Sodium Glucoheptonate is not hazardous. Avoid excessively humid conditions. Store in a cool dry place. Avoid inhalation or ingestion of product.

  • Section 1 Body: 

    Use good industrial hygiene practice and wear goggles and a dust mask to minimize irritation from dust. Avoid contact with aluminum, magnesium or strong acids.

  • Section 1 Body: 

    Stimpro 763 is a flammable liquid. Use good industrial safety procedures when handling this material.

  • Section 1 Body: 

    The product is toxic and corrosive and requires special handling procedures. Refer to the Material Safety Data Sheet for handling instructions.

  • Section 1 Body: 

    The product is corrosive and requires special handling procedures. Refer to Material Safety Data Sheets for handling instructions.

  • Section 1 Body: 

    The product is toxic and requires special handling procedures. Refer to the Material Safety Data Sheet for handling instructions.

  • Section 1 Body: 
    • High viscosity for bit face evacuation and cuttings transport
    • Creates filter cake for wellbore stability
    • Exhibits gel strength for static cuttingsuspension
    • Increased lubrication to bit and tubulars over water alone
    • Inexpensive viscosifier for lost circulation situations
    • Easily clarified by flocculation andcoagulation with appropriate additives
  • Section 1 Body: 

    Quantities of Barite to be used and the volume increase may be quickly determined by dividing the desired weight by 2 to give the number of sacks required per 100 barrels of mud for each 0.1 ppg increase. For each 15 sacks added there will be one barrel volume increase. 

  • Section 1 Body: 

    Weight formula for Cal Carb 325:

    Cal Carb 325 (lb/bbl) equals 945 (W2 - W1) divided by 22.5 - W2

    Where:

    • W1 = initial mud weight in ppg
    • W2 = desired mud weight in ppg
  • Section 1 Body: 
    • High viscosity for bit face evacuation and cuttings transport
    • Creates filter cake for wellbore stability
    • Exhibits gel strength for static cutting suspension
    • Increased lubrication to bit and tubulars over water alone
    • Inexpensive viscosifier for lost circulation situations
    • Easily clarified by flocculation and coagulation with appropriate additives
  • Section 1 Body: 
    • Viscosifier for fresh water based muds
    • Reduces fluid loss by the formation of a tight filter cake on the wellbore surface
    • Mixes and hydrates easily and quickly
    • Lubricates the bit and drilling assembly
    • Impermeable membrane applications
  • Section 1 Body: 

    Placement of the Grout-Well products is best done using a positive displacement or progressive cavity pump. When pumping must be done with gear or diaphragm pumps, you may have to use additional make-up water to insure pumpability due to the limited pressure generated by these types of pumps.

    When adding the grouts to make-up water, the slurry will resemble pancake batter, a creamy consistency with lumps. This is the ideal time to pump the fluid since all the bentonite has not fully hydrated. Once in place, the particles continue to swell, sealing off cracks and crevices while gelling to form its caulk-like consistency.

    Provided local regulations allow, it is always recommended that the tremie line be withdrawn as the grout is being pumped. This permits the grout to continue its set undisturbed, reduces pump pressure, and minimizes unnecessary migration into surrounding formations.

  • Section 1 Body: 
    • Chemically stable, results from EP Toxicity Metals Analysis are below RCRA limits for hazardous constituents
    • Provides a high solids clay seal
    • Prevents infiltration of surface contamination
    • Provides a permanent flexible seal
    • Can be used to seal abandoned holes, conductor pipes and seismic shot holes
  • Section 1 Body: 

    Earth Pro Bio Bear Rod Grease can be applied like normal rod grease by hand swabbing it on. It is firmer in texture than traditional rod grease
    products and requires a bit of technique change for application but field trials have shown that when applied properly this product has superior performance to its competitors.

  • Section 1 Body: 

    Earth Pro Big Bear Rod Grease is recommended for grease lubrication on diamond drill rods whether operating on the surface or underground.

  • Section 1 Body: 
    • Less friction for reduced galling
    • Lowers torque requirements — proper makeup is achieved quickly with minimum torque
    • Performs as an excellent sealant at pressures up to 20,000 psi
    • Environmentally friendly
    • Corrosion and rust inhibitor
  • Section 1 Body: 

    Kopr-Kote Drill Collar and Tool Joint Compound is recommended for use on rotary shouldered connections where downhole conditions are severe and the probability of makeup while drilling is anticipated. Typical applications would be steamed injection wells, geothermal applications, high angle holes, problem holes involving whip stocks, horizontal drilling applications, and on rigs powered by top-drive systems. Kopr-Kote prevents high stress levels which shorten the useful life of drill string connections.

  • Section 1 Body: 
    • Phosphate free and biodegradable
    • Rinses easily from samples
    • Minimize wear on the inner tube
    • Lubricates the core lifter
    • Facilitates the core sliding into the inner tube
  • Section 1 Body: 
    Thermal Conductivity .93 Btu/hr-ft-OF 1.05 Btu/hr-ft-OF 1.13 Btu/hr-ft-OF 1.2 Btu/hr-ft-OF
    Permeability <2 x 10-8  6 x 10-8 6 x 10-8; 6 x 10-8
    Solids Content  64% 67% 69%  71%
    Slurry Weight  13.6 lb/gal 14.4 lb/gal 15.1 lb/gal 15.2 lb/gal
    Slurry Volume/Batch  29 gals 36 gals 41 gals 41.5 gals

     

    Approximate Volumes for Grout
    Drilled Hole Diameter Loop Inside Diameter Anlr. Volume (ft³/ft) Anlr. Volume (gal/ft)
    4 3/4" 0.08 0.57
    4.5 1" 0.09 0.70
    5 1" 0.12 0.89
    5.5 1" 0.15 1.10
    6 1" 0.18 1.33
    5 1-1/4" 0.11 0.84
    5.5 1-1/4" 0.14 1.05
    6 1-1/4" 0.17 1.29
  • Section 1 Body: 

    Make up fluid (w/ polymer addition): 15 lb/100 gal 

    Unconsolidated formations: 20-30 lb/100 gal. 

    Tru-Bore loses effectiveness in hard, low pH or salt water. To achieve the maximum yield of 240-260 bbl, the make up water should be treated with soda ash (sodium carbonate) to a pH of 8.0-9.0. Do not use salt water since it cannot be treated.

  • Section 1 Body: 
    • Used in air rotary drilling (all disciplines) and underground tunneling
    • Non-flammable, non-toxic
    • Highly dispersible in water
    • Biodegradable
  • Section 1 Body: 
    • Reduces viscosity in drilling fluid
    • Can be utilized for wellbore cleanup prior to production
    • Used to treat some contaminants in bentonite slurries
    • Aids in well cleanup for water well or environmental reasons
  • Section 1 Body: 
    • Full spectrum viscosifier
    • Optimal performance
    • Simple mixing and instructions
  • Section 1 Body: 
    • Lowers fluid loss
    • Promotes a very thin slick filter cake
    • Minimizes screen blinding due to short polymer length in comparison to synthetics
    • High shear mixing capability
  • Section 1 Body: 
    • Viscosifier for all water based systems
    • Readily biodegradable product for use in environmentally sensitive situations
    • Not affected by ionic contaminants
    • Organic, non-toxic
    • Cools and lubricates bits
  • Section 1 Body: 
    • High “low shear rate” viscosity for hole cleaning
    • Lubricates the drilling assembly
    • Exceptional rheology profile and inhibition on sensitive formations
    • Maximizes viscosity yield
    • Minimizes hydration times
    • Does not have a negative flocculating effect on bentonite systems
    • Less susceptible to salt or brackish water contamination
    • Easy, quick and even mixing
  • Section 1 Body: 
    • Reduce weight and volume by as much as 20%
    • Immediately converts drill fluids to a solid (<30)
    • Creates a dry, stack-able solid for easy handling
    • Helps waste pass paint filter criteria
    • Minimal humidity effects
    • Landfill friendly
    • Manually mix small or large batches
  • Section 1 Body: 
    • Maximize stability and usability
    • Hydrates in the formation not only in the wellbore
    • Complete solution for broken ground or loose over burden drilling
  • Section 1 Body: 
    • Easy mixing - low dust alternative to sulfonated asphalt
    • Low dust component
    • High deformability at low temperatures so it is ideal as a bridge
    • Inert solid - not soluble in water
    • Seal micro-fractures in rock to prevent water infiltration and eventual breakdown
    • Reduced torque and drag on rotating assemblies
    • High temperature seepage loss material applications
  • Section 1 Body: 
    • Stops lost circulation to formation by plugging fissures in rocks
    • Bonds loose rock together and prevents sloughing
    • Provides lubrication in loose, abrasive broken ground conditions
    • Resists alcohol bases and acids
  • Section 1 Body: 
    • Highly dispersible and non-toxic
    • Superior dispersion in poor mixing environments (low shear mixing)
    • Reduces torque and tubular wear
    • Increased rate of penetration in Horizontal Directional Drilling wells
    • Reduces swelling and increases wellbore stability
  • Section 1 Body: 
    • Increases viscosity to provide hole cleaning and cutting transport
    • Shear thinning polymer to reduce pumping pressure demands
    • Maintains hole conditions in friable zones such as overburden, silts, sands and clays
    • Superior lubricating qualities eliminating vibration while increasing core recovery
    • Encapsulating structure reduces swelling of clays and caving shales
  • Section 1 Body: 
    • Decreased torque and drag on rotating down hole tooling
    • Decreased tool wear in abrasive formations
    • Enhanced bit cooling
    • Increased rate of penetration
    • Environmentally safe, non-polluting and non-toxic
  • Section 1 Body: 
    • Increase viscosity to provide hole cleaning and cuttings transport
    • Shear thinning polymer to reduce pumping pressure demands
    • Maintains hole conditions in friable zones such as overburden, silts, sands and clay
    • Superior lubricating qualities eliminate vibration while increasing core recovery
    • Encapsulating structure reduces swelling of clays and caving shales
    • Environmentally acceptable, non-toxic and does not ferment.
  • Section 1 Body: 
    • Viscosifier for all water based systems
    • Readily biodegradable product for use in environmentally sensitive situations
    • Not affected by ionic contaminants
    • Organic, non-toxic
    • Cools and lubricates bit
    • Non-toxic
  • Section 1 Body: 
    • Seal micro-fractures in rock to prevent water infiltration and eventual breakdown
    • Reduced torque and drag on rotating assemblies
    • High temperature seepage loss material applications
  • Section 1 Body: 
    • Increase viscosity to provide hole cleaning and cuttings transport
    • Shear thinning polymer to reduce pumping pressure demands
    • Maintains hole conditions in friable zones such as overburden, silts, sands and clay
    • Superior lubricating qualities eliminate vibration while increasing core recovery
    • Encapsulating structure reduces swelling of clays and caving shales
    • Environmentally acceptable, non-toxic and does not ferment.
  • Section 1 Body: 
    • Stop lost circulation to formation by plugging fissures in rock
    • Bond loose rock together end prevent sloughing
    • Provide lubrication in loose, abrasive broken ground conditions
  • Section 1 Body: 

    WDS 120X added to plain water stabilizes swelling, caving and easily disintegrated formations, provides drill string lubrication reducing torque, rod chatter and pump pressure.

    WDS 120X, when added to a pre-mixed X-TRA Gel drilling fluid, greatly improves the properties which affect hole cleaning and formation stabilization.

    WDS 120X, when used in foam drilling fluids, provides greater foam stability which results in larger chip samples (cuttings), faster penetration, reduced air and water requirements and prevents clay/shale from swelling and sticking. WDS 120X can be broken down with sodium hypochlorite (bleach).

  • Section 1 Body: 
    • 100% soluble in fresh or brackish water drilling fluids
    • Concentrated organic amine solution
    • Inhibit infiltration and hydration of reactive clay and shale
    • Can be added in batch form and discontinued to save costs
    • Does not adversely affect viscosity nor does it require shear to mix properly
  • Section 1 Body: 
    • Viscosifier for fresh and salt or brackish water sources
    • High “low shear rate” viscosity for hole cleaning
    • Functions as a 2 part system with DR-133 to offer exceptional rheology profile and inhibition on sensitive formations
    • Lubricates the drilling assembly
  • Section 1 Body: 
    • Broad spectrum viscosity for hole cleaning and cutting suspension
    • Very fast dispersion and hydration in low shear environments
    • Lubrication from oil component of liquid emulsion to reduce wear on tubulars and tools
    • Shale encapsulation from PHPA polymers within the blend
    • Saline water compatible for mixing in sea or brackish water
  • Section 1 Body: 

    Fill available tanks with fresh water and apply maximum agitation to allow for quicker dispersion and hydration of initial application. Slowly add 1 kg Sand Stabilizer to 1000 L of water and allow to hydrate at maximum shear in the tank for 5 mins.

    While pumping mixture down, add an additional 2 kg/m³ as close to the suction point as possible to allow for semi hydrated polymers to reach formation. As the semi hydrated polymers are hydrated in or on the surface of the formation, they will form a securing polymer matrix that will halt further sloughing and collapse.

    Regular drilling applications in potential sloughing sand and loose overburden should be met with 2 kg/1000 L of water of Sand Stabilizer mixed and hydrated in the surface tanks like normal drilling polymers.

    Regular semi hydrated sweeps of Sand Stabilizer may also benefit broken ground conditions. Sweep by adding .5 kg of drill Sand Stabilizer at a point close to the suction in the mud tanks while pumping

  • Section 1 Body: 
    • Allows for the dispersion of reactive solids in a drilling fluid to prevent them from sticking to the tools, wellbore and each other
    • Promotes a thin firm filter cake
    • Reduces apparent viscosity in drilling fluid
    • Can be utilized for well bore cleanup prior to production
    • Non-toxic in prescribed concentrations
  • Section 1 Body: 

    Poly-Pro should be mixed slowly through the hopper and allowed to hydrate for 10-15 minutes prior to use. Poly-Pro is sensitive to high calcium levels, so the make up water should be treated with soda ash. Use a concentration of 0.3-1.0 lb of Poly-Pro per 100 gal of drilling fluid.

    Poly-Pro can be chemically broken down with household bleach (5% sodium hypochlorite) using a concentration of one gal of bleach per 100 gal of Poly-Pro fluid. Do not use solid calcium hypochlorite or perfumed bleach.

  • Section 1 Body: 

    Pro-Yield is a dry polymer and should be added slowly through a high shear mixer to prevent lumps or fisheyes. Pro-Yield should not be added before bentonite, as the yielded Pro-Yield will prevent the bentonite from hydrating. It may be used in fresh, salt or hard water.

  • Section 1 Body: 
    • Excellent performance on high-chrome or nickel alloys
    • Contains no metals
    • NSF H2 Registered
    • Extreme pressure additives protect against seizure and galling
    • Completely biodegradable
    • High film strength
    • High frictional properties ideal for casing drilling applications
    • Nontoxic
  • Section 1 Body: 

    Product contains Methanol and as such is toxic and flammable. Avoid sparks and any sources of ignition.

  • Section 1 Body: 

    Feedback received from mud engineers that have used this product include:

    • Easy to work as it dissolves easily
    • High performing fluid loss product
    • Exceeds performance of top brand products at lower concentrations
    • This product makes a night and day difference
  • Section 1 Body: 

    Hyperdrill AE 853 is a very versatile polymer which can be used for oil, gas, water and mineral drilling. It can be added to fresh, KCL or sea water based drilling fluid systems. Hyperdrill AE 853 functions primarily as a:

    • Shale inhibitor
    • Viscosifier
    • Flow line flocculant
    • Friction Reducer/Lubricant
    • Foam Stabilizer
  • Section 1 Body: 

    As a flocculant Hyperdrill AD 855 can be added directly to the flow line, or it may be dispersed in water in the chemical barrel prior to adding to the flow line. Hyperdrill AD 855 is very slippery if spilled. A spill should be cleaned up with an absorbent material. (Do not add water to a spill).

  • Section 1 Body: 

    Handling: Minimize skin contact. Wash with soap and water before eating, drinking, smoking, or using toilet facilities. Bags and containers of this material may be hazardous when emptied. Empty containers retain product residues.

    Storage: prevent absorption of moisture and possible caking. Store in a cool, dry place. Do not store with cyanides, sulfides, chlorine, hypochlorous acid, hypochlorites or alkalis.

  • Section 1 Body: 

    Handling: Minimize skin contact. Wash with soap and water before eating, drinking, smoking, or using toilet facilities. Bags and containers of this material may be hazardous when emptied. Empty containers retain product residues.

    Storage: prevent absorption of moisture and possible caking. Store in a cool, dry place. Do not store with cyanides, sulfides, chlorine, hypochlorous acid, hypochlorites or alkalis.

    General Comments: Treat as a strong acid

  • Section 1 Body: 

    Handling: For industrial use only. Heat is generated upon dilution with water. When diluting, add product slowly to water with agitation. Never add water to the acid as severe splashing and reactivity will result. Always add acid to water. ATTENTION: This container hazardous when emptied. Since emptied container contains product residues (vapor or liquid), all labeled hazard precautions must be observed.

    Storage: Keep container closed when not in use. Keep out of reach of children.

    General Comments: Wear protective equipment when handling. Use only with adequate ventilation. Wash thoroughly after handling. Do not breathe vapor, mist, or dust. Do not get in eyes, on skin, or clothing. Do not swallow.

  • Section 1 Body: 

    Handling: The product is not considered dangerous and requires no special handling

    Storage: Avoid contact with strong acids or alkaline-based products

  • Section 1 Body: 

    Handling: Minimize skin contact. Wash with soap and water before eating, drinking, smoking, or using toilet facilities.

    Storage: Keep in well ventilated area. Keep package tightly closed. Store above 32°F. (0°C.) Product should not be stored with or near strong caustic or oxidizing agents.

  • Section 1 Body: 

    Handling: Minimize skin contact. Wash with soap and water before eating, drinking, smoking, or using toilet facilities.

    Storage: Keep in well ventilated area. Keep package tightly closed. Store above 32°F (0°C). Product should not be stored with or near strong caustic or oxidizing agents.

  • Section 1 Body: 

    Handling: Keep heat, lights, fire, and sparks away. Keep away from water or acid. For industrial use only. When diluting, add product slowly to water with agitation. Heat is generated upon dilution with water. Addition of water can cause violent splashing. ATTENTION: Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

    Storage: Keep container closed when not in use. Store in a cool dry place. Store away from oxidizers. Keep out of reach of children.

  • Section 1 Body: 
    • Contains no lead, copper or graphite
    • Prevents seizure up to 1427°C
    • Protects against rust and corrosion
    • Chemically inert
    • Acid resistant
    • Strong resistance to water wash off
  • Section 1 Body: 
    • Non-plating, non-reactive and no gassing
    • Low sulfur content
    • Brushable over a wide temperature range
    • Sticks to wet joints
    • Consistent rig floor make-up
    • Resistant to further downhole make-up
  • Section 1 Body: 

    Earth Pro pH Up Soda Ash is only partially soluble in water so prehydrating or attempting to dissolve it in water and then add it to a system will result in minimal benefit. Earth Pro pH Up Soda Ash is best added dry either through a mixing hopper or mechanically dispersed (sprinkled) over the top of the fluid surface or added at a point of agitation. 

    In make up water or to treat contamination from cement, anhydrite or to treat out Ca+ from floc water the flowing guideline is used if hardness can be measured. 

    • 350 mg/L calcium ions requires 1.0 kg/m³ of Earth Pro pH Up Soda Ash

    If total hardness or calcium can not be measured at the time of treatment or if blindly pretreating make up water for premixing, add Earth Pro pH Up Soda Ash in 0.5 kg/m³ increments until pH is 8.5 - 9.0. Do not exceed 3 kg/m³ without being able to physically determine the effectiveness of the addition either through chemical tests or general analysis of the mud. Over-treatment of Earth Pro pH Up Soda Ash can result in carbonate alkalinity and consequent excessive gel strengths and problems due to increased fluid loss. 

  • Section 1 Body: 

    Although Earth Pro pH Down Citric is of low hazard and toxicity, excess exposure to dust should be avoided to prevent irritation to the eyes, skin and respiratory tract.

    As with all organic material, caution is advised when storing or handling near strong oxidizing agents, alkali metals or strong bases.

  • Section 1 Body: 

    The product is corrosive and requires special handling procedures. Refer to Material Safety Data Sheet for handling instructions.

  • Section 1 Body: 

    Recommended monovalent brine concentration is <20,000 mg/L TDS and multivalent ion concentration <2,000 mg/L TDS.

    Earth Pro FR 100 has been formulated with an environmentally friendly surfactant package that ensures polymer hydration occurs almost instantaneously providing optimal performance. As a result, the product may be added as supplied on the fly by direct addition to the fracturing fluid.

    Typical dosage is the range 0.25 – 2.0 L/m³.

  • Section 1 Body: 

    Recommended monovalent brine concentration is <20,000 mg/L TDS and multivalent ion concentration <2,000 mg/L TDS.

    Earth Pro FR 200 has been formulated with an environmentally friendly surfactant package that ensures polymer hydration occurs almost instantaneously providing optimal performance. As a result, the product may be added as supplied on the fly by direct addition to the fracturing fluid.

    Typical dosage is the range 0.25 – 2.0 L/m³.

  • Section 1 Body: 

    Recommended monovalent brine concentration is <110,000 mg/L TDS and multivalent ion concentration >15,000 mg/L TDS.

    Earth Pro FR 300 has been formulated with an environmentally friendly surfactant package that ensures polymer hydration occurs almost instantaneously providing optimal performance. As a result, the product may be added as supplied on the fly by direct addition to the fracturing fluid.

    Typical dosage is the range 0.5 – 1.0 L/m³.

  • Section 1 Body: 

    Recommended monovalent brine concentration is <110,000 mg/L TDS and multivalent ion concentration >15,000 mg/L TDS.

    Earth Pro FR 400 has been formulated with an environmentally friendly surfactant package that ensures polymer hydration occurs almost instantaneously providing optimal performance. As a result, the product may be added as supplied on the fly by direct addition to the fracturing fluid.

    Typical dosage is the range 0.25 – 2.0 L/m³.

  • Section 1 Body: 
    Product Number Product Name
    27013 Mud Pump Liner 5.5” x 8”
    46585 Mud Pump Liner 4.5” x 5” GD
    46641 Mud Pump Liner 4” x 5”
    42003 Liner Packaging 5.5” x 8”
    42004 Liner Packaging 5” x 6”
    42006 Liner 5” x 6” 5” Bore PPGD FG45650
    42007 Liner 5.5” x 8” 5.5” Bore PPGD FD45655
    44319 Gasket Liner 5” x 6” PPGD25G27
    47338 Gasket Liner for D-300 AJ1125
    47339 Gasket Liner for D-300 AJ1115
    47225 Chrome Liner 5.5” x 8” and 5.5” x 10” PPGD FD45655C

     

  • Section 1 Body: 
    Product Number Size
    38449 3” x 6”
    49561 4” x 6”
    30651 4” x 7”
    38450 4” x 7”
    46446 4” x 7”
    46135 4.5” x 6”           
    30650 4.5” x 8”
    38451 5” x 8”
    49172 5.75” x 8”
    31036 6” x 9”
    38452 6” x 10”
    46341 8”
    38442 8” x 14”
  • Section 1 Body: 
    Product Number Product Description
    27072 Pitless Adapter 5 9/16” OD CI 5JCI
    44285 Pitless Adapter CI 6OD JC 2
  • Section 1 Body: 
    Product Number Description
    49011 4.5" 5TPI Female X 3" NPT Female
    49010 4.5" 5TPI Female X 4" NPT Female
    49006 4.94" Female Slip X 4" NPT Female
    48962 4.94" 5TPI Female X 3" NPT Female
    49005 4.94" 5TPI Female X 4" NPT Female
    49167 5" LH 5TPI Female X 3" NPT Female
    49166 5" LH 5TPI Female X 4" NPT Female
    49165 5" LH 5TPI Female X 5" NPT Female
    49164 6" LH 5TPI Female X 4" NPT Female
    49009 6" LH 5TPI Female X 5" NPT Female
    49007 6" RH 5TPI Female X 4" NPT Female
    49008 6" RH 5TPI Female X 5" NPT Female
  • Section 1 Body: 
    Product Number Size
    48846 4-1/2” x 3-3/4” Long
    43758 5-9/16”
    42404 6-5/8” x Long
    43496 6-5/8” x Short
    42407 7”
  • Section 1 Body: 
    Product Number TEL x Length Slot Size
    49523V 4” x 5’ .008”
    41195V 4” x 5’ .010”
    41196V 4” x 5’ .012”
    41198V 4” x 5’ .020”
    41268V 4” x 5’ .030”
    41236V 5” x 10’ .007”
    41238V 5” x 10’ .015”
    46091V 5” x 5’ .008”
    41199V 5” x 5’ .010”
    41201V 5” x 5’ .015”
    41202V 5” x 5’ .020”
    41203V 5” x 5’ .025”
    41204V 6” x 5’ .010”
    41205V 6” x 5’ .012”
    41206V 6” x 5’ .015”
    41207V 6” x 5’ .020”
    42320V 6” x 5’ .025”
    41386V 6” x 5’ .030”
    41383V 6” x 5’ .040”
    41395V 6” x 5’ .050”
  • Section 1 Body: 
    Product Number Size Product Name
    41323 4.5” x 3” Figure K
    42113 5-1/8” x 4” Figure K
    49318 7” x 8” Casing Female x Male

     

  • Section 1 Body: 
    Product Number Product Name Packaging
    47252 Silica Sand 10/20 50lb
    47255 Silica Sand 20/40 50lb
    19460/28111 Silica Sand 50/100 40kg/88lb
    28113 Silica Abras. Sand 30/50 88lb
    30122 Silica Sand #16 80lb
    99900466 Silica Sand, LM #50 50lb
    99900467 Silica Sand, LM #20/30 50lb
  • Section 1 Body: 
    Product Number Product Name Packaging
    11256 / 28112 Filter Sand 10/20 50lb
    11255 Filter Sand 20/40 100lb
    18600 Lane Mtn Sand #50 80lb
    28110 Mesh Sand 50/80 1kg
    47402 Pea Gravel 3/8” X 55lb
    24525 Sand 3 mm 1kg
    27080 Sand 20/30 99% Silica Quartz 100lb
    49266 Pea  Gravel  14 mm washed x 1 cubic yard Tote
    49603 Filter Gravel  4/10 50lb
    49568 Silica Sand 40/70 Geothermal 50lb
  • Section 1 Body: 
    Product Number Size Schedule Description
    46429 1" x 20' 120 SHUR-ALIGN MPT x FPT
    49107 1-1/2” x 20’ 120 SHUR-ALIGN MPT x FPT
    47021 1-1/4” x 20’ 120 SHUR-ALIGN MPT x FPT
    46858 2” x 20’ 120 SHUR-ALIGN MPT x FPT
  • Section 1 Body: 
    Product Number Description
    48837 4" X 20' X SDR 21 5 TPI
    48896 4.94" X 20' X .248" 5 TPI
    48947 4.94" X 20' X .291" 5 TPI
    49242 5" X 20' X SCH80 5 TPI LH
    49241 5" X 20' X SCH80 5 TPI RH
    49636 6" X 10' X .390" 5 TPI LH
    48864 6" X 20' X .390" 5 TPI LH
    48863 6" X 20' X .390" 5 TPI RH
  • Section 1 Body: 
    Product Number Size Wall Thickness End Type
    41724 4-1/2" x 21' .237" Thread & Coupled
    41735 5-9/16" x 20' .188" Inserted Joint
    41736 5-9/16" x 20' .258" Inserted Joint
    41165 6-5/8" x 5' .188" Plain End
    47139 6-5/8" x 20' .188" Bevelled
    41746 6-5/8" x 20' .188" Inserted Joint
    41751 7" x 20' .231" Inserted Joint
    41759 8-5/8" x 21' .322" Thread & Coupled
    46778 10-3/4" x 21' .365" Thread & Coupled
  • Section 1 Body: 
    Product Number Size Style
    41850 2" x 2-7/8" OD Weld On
    44101 4-1/2" x 4" ID x 4" Long Weld On
    46684 4-1/2" x 4" ID x 4" Long Threaded
    41853 4-1/2" x 4-1/8" ID x 4" Long Weld On
    41851 4-1/2" x 4-2/25" ID x 4" Long Threaded
    43949 5-9/16" x 5-1/4" ID x 4" Long Threaded
    43457 5-9/16" x 5-1/4" ID x 4" Long Weld On
    41872 5-9/16" x 5-1/4" ID x 4-1/2" Long Weld On
    41903 6-5/8" x 6-1/8" ID x 4" Long Weld On
    41900 6-5/8" x 6-1/8" ID x 4" Long Threaded
    41890 6-5/8" x 6-1/8" ID x 4-1/2" Long Threaded
    41899 6-5/8" x 6-1/8" ID x 5-3/8" Long Threaded
    41878 6-5/8" x 6-1/8" ID x 5-3/8" Long Weld On
    41916 6-5/8" x 6-1/4" ID x 3-1/2" Long Weld On
    41918 6-5/8" x 6-1/4" ID x 4-1/2" Long Threaded
    41920 6-5/8" x 6-1/4" ID x 4-1/2" Long Weld On
    43479 6-5/8" x 6-1/4" ID x 5-1/2" Long Weld On
    43458 6-5/8" x 6-1/4" ID x 5-3/8" Long Weld On
    41896 6-5/8" x 6-1/4" ID x 5-3/8" Long Threaded
    41893 6-5/8" x 6-1/4" ID x 5-3/8" Long Threaded
    41923 7" x 6-1/2" ID x 5-3/4" Long Weld On
    43468 8-5/8" x 8-1/8" ID x 7-3/4" Long Weld On
    44569 8-5/8" x 8-1/8" ID x 7-3/4" Long Threaded
    41928 8-5/8" x 8-1/4" ID x 7-3/4" Long Weld On
    43469 10-3/4" x 10-1/4" ID x 9-1/2" Long Weld On
  • Section 1 Body: 
    Product Number Product Name SDR
    47168 3/4" X 150' 11.0
    47270 3/4" X 185' 11.0
    49221 3/4" X 200' 11.0
    49223 3/4" X 300' 11.0
    46873 1" X 315' 9.0
    49205 1" X 350' 11.0
    46743 1" X 375' 11.0
    49131 1" X 400' 11.0
    49204 1" X 500' 11.0
    49641 1-1/4" X 155' 11.0
    48968 1-1/4" X 200' 11.0
    48748 1-1/4" X 205'  11.0
    46811 1-1/4" X 250' 11.0
    47030 1-1/4" X 270' 11.0
    46980 1-1/4" X 275' 11.0
    46984 1-1/4" X 285' 11.0
    46977 1-1/4" X 305' 11.0
    46612 1-1/4" X 310'  11.0
    46976 1-1/4" X 325' 11.0
    47417 1-1/4" X 330' 11.0
    49198 1-1/4" X 350' 11.0
    46978 1-1/4" X 380' 11.0
    49102 1-1/4" X 406' 11.0
    47105 1-1/4" X 420' 11.0
    49103 1-1/4" X 425' 11.0
    47269 1-1/4" X 460' 11.0
    47470 1-1/4" X 470' 11.0
    47131 1-1/4" X 475' 11.0
    49203 1-1/4" X 492' 11.0
    48741 1-1/4" X 500' 11.0
    47473 1-1/4" X 505' 11.0
    46897 1-1/4" X 510'  11.0
    48803 1-1/4" X 515' 11.0
    47141 1-1/4" X 600' 11.0
    47368 1-1/4" X 605' 11.0
    49551 1-1/4" X 644' 11.0
    47253 1-1/4" X 650'  11.0
  • Section 1 Body: 
    Product Number Size Description
    44010 2” x 9” Split Rod Wiper
    49031 2” x 12” Rod Wiper
    46511 2-1/8” x 9” Rod Wiper
    46219 2-3/8” x 9" Rod Wiper
    44312 2-1/2” x 9” Rod Wiper
    33158 2-3/4” x 9” Rod Wiper
    46706 2-3/4” x 14” Dual Split Rod Wiper
    41949 2-7/8” x 12” Rod Wiper
    49073 2-7/8” x 14” Rod Wiper
    47414 3” x 6-1/2” Flat for 3-1/2” OD Pipe
    38458 3” x 9” Flat for 3-1/2” OD Pipe
    46514 3-1/4” x 14” Dual Split Rod Wiper
    33170 3-1/2” x 9” Rod Wiper
    46053 3-1/2” x 12” Flat for 3-1/2” Drill Rod
    49311 4-1/4” x 12” Flat for 4-1/2” Drill Rod
    43811 4-3/8” x 12” Rod Wiper
    43810 4-1/2” x 9” Rod Wiper
    44289 4-1/2” x 9” OD Thin Rod Wiper
    46422 4-1/2” x 12” Flat for 4-1/2” Drill Rod
    46385 7-5/8” x 12" Rod Wiper
    46515 9” x 2-3/4” Rod Wiper
  • Section 1 Body: 
    Product Number Bolts Size
    46358 3 2-3/8"
    46783 4 3-1/2"
    41815 4 4-1/2"
    44510 3 4-1/2"
    44585 4 5-9/16"
    46190 3 6-5/8"
    41817 4 6-5/8"
    46063 4 8-5/8"
    48955 3 10-3/4"
    41802 4 10-3/4"
    49701 4 12"
    41804 4 12-3/4""
    49209 4 14"
    48788 4 16"
  • Section 1 Body: 
    Size Schedule Length Finish
    4" 40 10.5" galvanized or black
    6" 40 10.5" galvanized or black
    8" 40 10.5" galvanized or black
    10" 40 10.5" galvanized or black
    12" 40 10.5" galvanized or black
  • Section 1 Body: 
    Product Number Product Description
    47098 QC Slope Indicator Casing 70 mm x 3 m (2.75” x 10’)
    48901 QC Slope Indicator Casing 85 mm x 3 m (3.34” x 10’)
    48908 QC Slope Indicator Casing 85 mm x 1.5 m (3.34” x 5’)
    49020 QC Slope Indicator Casing 70 mm x 1.5 m (2.75” x 5’)
  • Section 1 Body: 
    Product Number Size Product Description
    30453 2” x 18” Steel Shelby Tube
    39589 2” x 24” Galvanized Shelby Tube
    44517 2” x 26.5” Shelby Tube
    37100 2” x 30” Steel Shelby Tube #120021-4
    30527 2.5” x 30” Steel Shelby Tube #120086-4
    30558 2.5” x 30” Stainless Steel Shelby Tube #120246-4
    46386 2.875” x 26.5” Shelby Tube
    30457 3” x 18” Steel Shelby Tube #120037-32
    41261 3” x 24” 4 Hole Steel Shelby Tube
    30456 3” x 30” Stainless Steel Shelby Tube #120230-01
    30483 3” x 30” Galvanized Shelby Tube #120037-19
    30484 3” x 30” Steel Shelby Tube #120037-4
    47222 3” x 30” 4 Hole Steel Shelby Tube
    49498 3” x 36” 4 Hole Stainless Steel Shelby Tube #120230-5
    30494 3.5” x 30” Steel Shelby Tube #120093-11
  • Section 1 Body: 
    Product Number Size TPI Description
    41081 2” x 5’ 2 .020” Slotted
    41102 2” x 5’ 2 .010” Slotted
    41183 2” x 5’ 4  
    41184 2” x 5’ 4 .020” Slotted
    41082 2” x 10’ 2 .010” Slotted
    41083 2” x 10’ 2 .020” Slotted
    41103 2” x 10’ 2  
    41182 2” x 10’ 4 .020” Slotted
    46154 4” x 10’ 8  
    46155 4” x 10’ 8 .020” Slotted
    41343 5” x 20’ 8  
  • Section 1 Body: 
    Product Number Description
    48844 1" Stainless Steel Centralizer
    36607 2" Stainless Steel Centralizer
    47046 3.78" Stainless Steel Centralizer
    36608 4" Stainless Steel Centralizer
    47001 4.5" Stainless Steel Centralizer
    36609 6" Stainless Steel Centralizer
    36615 7" Stainless Steel Centralizer
    49121 8" Stainless Steel Centralizer
  • Section 1 Body: 
    Product Number Size Description
    37814 3.5” x 10” Manhole Cover CI Water Tight
    46420 4” x 7” Manhole Cover Cast Iron
    41385 6” Manhole Heavy Skirt
    47103 6” Monitoring Well Manhole Lid and Ring Only #6SLW
    37815 6” x 6” Manhole Cover Aluminum
    41224 6” x 10” Manhole
    36601 7” x 10” Manhole EMI Painted
    41217 7” x 10” Manhole EMI
    37807 7” x 10” Manhole Cover
    36602 8” x 8” Manhole EMI Painted
    46561 8” x 8” Manhole Cover
    37808 8” x 12” Manhole Cover
    41961 8” x 12” Manhole
    37812 9” Manhole Cover MI 519 Load 39000 Heavy Duty Water Tight
    37809 9” x 12” Manhole Cover
    37810 12” x 12” Manhole Cover
    39739 18” Manhole Lid
    37811 18” x 12” Manhole Cover
    39740 18” x 18” Manhole Cover
    46519 18” x 18” Manhole Lid Only
  • Section 1 Body: 
    Product Number Size Description
    46569 3.5" x 4' Round Well Cover
    37932 4" x 5' Hinged Cap Well Cover
    41161 4.5” x 5’ Casing Protector with Locking Cap Well Cover
    41342 5-9/16” x 5’ Casing Protector with Locking Cap Well Cover
    41169 5-9/16" x 5' Casing Protector
    46439 5-9/16" x 6' Pipe Steel Well Cover
    39604 6" x 5' Hinged Cap Well Cover
    47258 6-5/8” x 5’ Casing Protector with Locking Cap Well Cover
    41165 6-5/8" x 5' Casing Protector
    36600 7" x 10' Morrison Painted Well Cover
    49175 8" x 5' Hinged Well Cover
    49457 8-5/8" x 5' Casing Protector
  • Section 1 Body: 

    Product Number

    Size

    Description

    37740

    6.25” x 1 x 2.75”

     

    37741

    4” x 1”

     

    37742

    5” x 1”

     

    38486

    4” x 1” x 2.75”

     

    38488

    5” x 1” x 1.25”

     

    38494

    6.25” x 1”

     

    38496

    6.25” x 2”

    Single Hole

    42602

    2” x 1”

    Clamp over well

    42609

    8”

    Single Hole

    42610

    8”

    Single Hole

    42611

    8”

    Single Hole

    42612

    5” x 1.5”

     

    42613

    6” x 1.25”

     

    46614

    10” x 3”

    Single Hole

    47377

    12” x 2”

    Single Hole

    47387

    4” x 1.25”

     

  • Section 1 Body: 
    Product Number Size Description
    39743 N 3 Row N Wooden Core Box
    39904 N 4 Row N Wooden Core Box
    39905 N 5 Row N Wooden Core Box
    47864 P3 Wooden Core Box
    48938 H Wooden Core Box
  • Section 1 Body: 

    The Hydrolift-2 is an electrically powered automatic actuator for use with the Standard Flow, High Flow and Low Flow Inertial pumping systems.

    The Hydrolift-2 is fully adjustable and will adapt to almost any size casing or protective well casing and can also be used with flush grade well completions. The Hydrolift-2 supports the inertial pump tubing and also anchors the discharge end of the tubing facilitating sample collection.

    The Hydrolift-2 requires either a 110 volt or 220 volt AC power supply. Using the Hydrolift-2 will result in a big boost to your field sampling program. This actuator is perfect for purging and sampling 2” diameter monitoring wells up to 150 to 200 feet deep.

    This actuator is also great for use when developing monitoring wells. The use of an automated actuator will eliminate the fatigue that can be experienced on large monitoring programs.

    • fully adjustable
    • hinged tubing clamp
    • suitable for use with Standard FlowHigh Flow and Low Flow Inertial Pumps
    • adapts to almost any size casing or protective well casing
    • anchored discharge end of tubing facilitates sample collection
    • reduces fatigue when purging large volumes from wells
  • Section 1 Body: 

    The Lever Pump is a manual lever suitable for use with the Standard Flow, High Flow and Low Flow Inertial Pumping Systems.

    The Lever Pump is fully adjustable and will adapt to almost any size casing or protective well casing. An above ground well completion is required in order to use the Lever Pump.

    Using the Lever Pump can make sample collection easier because it supports the discharge end of the pump's tubing, allowing the field technician to operate the inertial pump with one hand and hold a sample container with the other. The tubing clamp is hinged, which helps prevent pump tubing from abrading against well casing. 

    Additionally, the hand pump can reduce some of the fatigue that one may experience when required to purge large volumes from wells.

    • fully adjustable
    • hinged tubing clamp
    • suitable for use with Standard Flow, High Flow and Low Flow Inertial Pumps
    • adapts to almost any size casing or protective well casing
    • one handed operation
    • reduces fatigue when purging large volumes from wells
  • Section 1 Body: 

    The PowerPack PP1 is a gasoline powered automatic actuator for use with the Standard Flow System, High Flow System and Low Flow Inertial Pumping systems.

    The PowerPack PP1 is fully adjustable and will adapt to almost any size casing or protective well casing and can also be used with flush grade well completions. The PowerPack PP1 supports the inertial pump tubing and also anchors the discharge end of the tubing facilitating sample collection.

    The PowerPack PP1 is powered by the Honda GX25 a 25cc Mini 4-Stroke OHC gasoline engine. This lightweight motor is EPA/CARB compliant, runs on regular gas and has a quiet - pleasing "low" tone. The PowerPack PP1 includes a backpack frame making it completely portable. Using the PowerPack PP1 will result in a big boost to your field sampling program. 

    This actuator is perfect for purging and sampling 2” diameter monitoring wells up to 150-200 feet deep. This actuator is also great for use when developing monitoring wells.

    The use of an automated actuator will eliminate the fatigue that can be experienced on large monitoring programs.

    • fully adjustable
    • powered by Honda GX25 a 25cc Mini 4-Stroke OHC gasoline engine
    • includes backpack frame for complete portability
    • suitable for use with Standard Flow, High Flow & Low Flow Inertial Pumps
    • adapts to almost any size casing or protective well casing
    • anchored discharge end of tubing facilitates sample collection
    • reduces fatigue when purging large volumes from wells
  • Section 1 Body: 

    The PowerPump 2 is a gasoline powered automatic actuator for use with the Standard Flow System, High Flow System and Low Flow Inertial Pumping systems.

    The PowerPump 2 is adjustable and will adapt to almost any size casing of protective well casing and can also be used with flush grade well completions. The PowerPump 2 supports the inertial pump tubing and also anchors the discharge end of the tubing, facilitating sample collection.

    The PowerPump 2 is powered by the Honda GX100 Air-cooled, 4-Stroke, OHC gasoline engine. This 2.8 hp motor is EPA/CARB compliant, runs on regular gas. The PowerPump 2 is our most powerful actuator and can operate the High Flow inertial pump in monitoring wells to depths of up to 300 feet. Using the PowerPump 2 will result in a big boost to your field sampling program, especially at sites with very deep installations.

    This actuator is perfect for purging and sampling 2” diameter monitoring wells up to 300 feet deep. This actuator is also great for use when developing monitoring wells.

    The use of an automated actuator will eliminate the fatigue that can be experienced on large monitoring programs.

    • fully adjustable
    • powered by Honda GX100 Air-cooled, 4-Stroke, OHC gasoline engine
    • our most powerful actuator
    • suitable for use with Standard Flow, High Flow& Low Flow Inertial Pumps
    • adapts to almost any size casing or protective well casing
    • anchored discharge end of tubing facilitates sample collection
    • reduces fatigue when purging large volumes from wells
  • Section 1 Body: 

    The High Flow System is considerably heavier than the Standard Flow System and consequently is not nearly as suitable for manual operation. The High Flow System can be manually operated in monitoring wells up to a maximum depth of about 60 feet depending on the operators strength and endurance. 

    It is recommended to use an automated actuator with the High Flow System. The Hydrolift-2, PowerPack-PP1 or PowerPump-2 are all recommended for use with the High Flow System

  • Section 1 Body: 

    The Low Flow System is probably most frequently operated by hand, although the Hydrolift-2 and a Lever Pump can also be used to operate this system.

  • Section 1 Body: 

    The Micro Flow System is usually hand operated.

  • Section 1 Body: 

    The Standard Flow System can be manually operated in most wells simply by holding the tubing by hand and oscillating it up and down in the well. Sometimes performance and endurance can be improved with the addition of a Lever Pump

    The greatest performance improvements are realized with the use of the Hydrolift-2, PowerPack PP1 or PowerPump-2. The use of one of these automated actuators greatly improves the well development capacity of the inertial pump. The automated actuators are also recommended when substantial purge volumes are required.

  • Section 1 Body: 
    • Standard Flow – SBD-25
    • High Flow – SBD-32
  • Section 1 Body: 

    EcoBailers are made of clear virgin PVC with a density of 1.31 whereas most disposable bailers are made of polyethylene which has a specific gravity of 0.96 to 0.98. PVC is also transparent whereas polyethylene is translucent, because of this, when you use the EcoBailer you can inspect your sample while it's still in the bailer. 

    Clear PVC EcoBailers are easily adapted to the FHT-45 Disposable Groundwater Filter for collection of samples for metals analysis directly from the bailer. A short length of 1/4" OD or 1/2” OD LDPE tubing along with the bottom emptying spout can be used to easily connect the FHT-45 or FMT-45 inline disposable groundwater filter to the bailer. This allows the bailed sample to flow by gravity directly through the filter and into a sample container. In many cases a 1 liter sample can be filtered in under 2 minutes using this method.

  • Section 1 Body: 
    • available in 1.5" diameter X 3' length, volume 935 mL 
    • faster sinking than polyethylene bailers
    • clear tube allows sample inspection within the bailer
    • requires less material to produce, resulting in less waste and cost to the environment
    • captures only hydrocarbons, not water
  • Section 1 Body: 

    These bailers are designed with a special valve and valve seat to provide more positive sealing and less clogging when removing the bailer from the well. All bailers come with the handy bottom emptying spout. It assists in collecting non-aerated samples from the valve end of the bailer, which is ideal for VOC sample collection.

    • available in 1.5" diameter x 3' length, 1027 mL volume 
    • longer valves to prevent silt entry and leakage
    • easy pour tops to facilitate the sampling process
    • custom molded emptying devices that allow control of sample flow
  • Section 1 Body: 
    • No-purge device provides comparable, formation quality samples of ALL parameters from small-diameter (1.5" and larger) wells for both short and long-term monitoring
    • Disposable
    • Fits in 1.5 Schedule 40 and larger wells
    • Standard material = virgin 4 mil PE
    • Tensile strength 25-35 lb
    • Absolute maximum volume obtainable without spilling = 600 mLs
    • Layflat = 2.5"W x 30"L
    • Filled Diameter = 1.5"
    • Filled Volume = ~600 mL
    • Fill Stroke = 30"
  • Section 1 Body: 
    • No-purge device provides comparable, formation quality samples of ALL parameters from 3" and larger wells for both short and long-term monitoring
    • Disposable
    • Fits in 3" Schedule 40 and larger wells
    • Standard material = virgin 4 mil PE. Tensile strength 25-35 lb
    • Absolute maximum volume obtainable without spilling 1.68 liters
    • Layflat = 4"W x 30"L
    • Filled Diameter = 2.6"
    • Filled Volume = ~1600 mL
    • Fill Stroke = 30"
  • Section 1 Body: 
    • Larger diameter sleeve for maximum fill rate and maximum volume.
    • Use in conjunction with the special 2-piece top weight.
    • Compresses to approximately 24 inches from the bottom of the well.
    • Disposable
    • Standard material virgin poly
    • Made for 2-inch schedule 40 wells — will not work in 2-inch Schedule 80 or European 50 mm wells.
    • Sampler Length: 60"
    • Weight Type: 1.9" OD top weight (24 oz.)
    • Minimum Well Diameter: 2" Schedule 40
    • Pull to Fill Distance*: 2 L in 5"
    • Compressed by Top Weight**: ~24"

    *Distance the sampler needs to move upward to fill completely. The top of the sampler marks the beginning of the sample interval.

    **Average distance from the top of sampler to the bottom of the well when compressed by the top weight. Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.

  • Section 1 Body: 
    • Fits in 1.5" Schedule 40 and larger wells
    • Standard material = stainless steel
    • Intended for use with the Standard 2-inch HydraSleeve (600 mLs) or as the bottom weight used in conjunction with any top weight.
    • Dimensions:  0.75" OD x 2.5" long
  • Section 1 Body: 
    Product Number Size Description
    37784 4.5” Aluminum Locking Well Cap
    37785 5-5/8” Aluminum Locking Well Cap
    37786 6-5/8” Aluminum Locking Well Cap
    49505 6-5/8” Aluminum Locking Vented with 1” Conduit Neck Well Cap
    47257 7" Aluminum Locking Well Cap – No Conduit Neck
  • Section 1 Body: 
    Product Number Description
    WCP4V 4V Well Cap            
    27030 5V Well Cap
    30567 5W Well Cap
    27033 6.6V Well Cap
    27032 6V Well Cap
  • Section 1 Body: 

    The CAP300X2 features 300 square centimeters of the same, high quality PES media as our other filters, providing a fast, efficient and economical option for specialized filtering requirements.

    All Inline Disposable Micron Filters are pre-rinsed with one liter of de-ionized water to ensure purity, and are now certified to rinse clean. Independent ICP/MS analysis proves it.

  • Section 1 Body: 

    The most popular patented tool used worldwide by well drillers, pump installers, well servicemen, and environmental drillers.  

    • All steel construction but light weight-only 14 lbs.
      Easy to operate, over center locking of jaws when downward pressure is applied to lever.
    • Kwik Klamp allows workers to bring pipe joint up to an easy working level.
    • Equipped with serrated and hardened replaceable jaws.
    • Excellent holding capability with load tests over 3000 lbs.
    • Designed to hold pipe sizes 1" - 2"(1.315"OD-2.375"OD) PVC, stainless, & galvanized. (not intended for bare steel drill rod)
    • Safety pin to prevent accidental unclamping.
    • Kwik Klamp is one of the safest time saving tools you will ever own.
    Product Number Description
    41191 Kwik Klamp 1 for 1" to 2" Pipe
    37195 Adjusting Screw with nylon water
    37196 Lever Linkage 2 pcs.
    37199 Jaw Set with bolts
    37203 Spring
    37206 Lock Pin
  • Section 1 Body: 
    Product Number Description
    30667 Displacement Plug HQ Grind Finish to 2-18/25” x 4-1/8”
    30668 Displacement Plug HWL
    30669 Displacement Plug NWL
    30670 Displacement Plug BWL
    30671 Displacement Plug AQ
    30672 Displacement Plug NTW
    30673 Displacement Plug PQ 4-1/2”
    30675 Displacement Plug PW 5-1/2”
    30679 Displacement Plug 7” Top
    30680 Displacement Plug 8-1/16” Top
  • Section 1 Body: 
    Product Number Description
    30209 Safety Plug EX P150
    30210 Safety Plug AQ P187
    30211 Safety Plug BQ P238
    30212 Safety Plug NQ P300
    30213 Safety Plug HQ P387
  • Section 1 Body: 
    • Left or right hand pipe thread
    • Wedges
    • Rubber seal
    • Aluminum tube
    • Plastic check ball 
  • Section 1 Body: 
    Product Number Description
    30151 CW Plug – HQ
    30152 CW Plug – NQ
    30153 CW Plug – BQ
    30154 CWBP Plug – AQ
    30155 CWBP Plug – NQ
    30156 CWBP Plug – PWT
    30158 CWBP Plug – HWT
    30170 CWBP Plug - HQ
  • Section 1 Body: 
    Product Number Plug Size Hole Size
    36837 0.94” x 72” 1”
    30171 1.125” x 36” 1.25”
    30172 1.125” x 48” 1.25”
    36999 1.125” x 12” 1.25”
    37000 1.125” x 18” 1.25”
    37001 1.125” x 24” 1.25”
    37002 1.125” x 60” 1.25”
    37003 1.125” x 72” 1.25”
    37004 1.125” x 96” 1.25”
    37005 1.125” x 120” 1.25”
    39597 1.125” x 6” 1.25”
    30173 1.25” x 48” 1.375”
    37006 1.25” x 12” 1.375”
    37007 1.25” x 18” 1.375”
    37008 1.25” x 24” 1.375”
    37009 1.25” x 36” 1.375”
    37010 1.25” x 60” 1.375”
    37011 1.25” x 72” 1.375”
    37012 1.25” x 96” 1.375”
    37013 1.25” x 120” 1.375”
    30174 1.375” x 36” 1.5”
    37014 1.375” x 12” 1.5”
    37015 1.375” x 18” 1.5”
    37016 1.375” x 24” 1.5”
    37017 1.375” x 48” 1.5”
    37018 1.375” x 60” 1.5”
    37019 1.375” x 72” 1.5”
    37020 1.375” x 96” 1.5”
    37021 1.375” x 120” 1.5”
    30175 1.625” x 18” 1.75”
    30176 1.625” x 36” 1.75”
    30177 1.625” x 48” 1.75”
    30178 1.625” x 72” 1.75”
    37022 1.625” x 12” 1.75”
    37023 1.625” x 24” 1.75”
    37024 1.625” x 60” 1.75”
    37025 1.625” x 96” 1.75”
    37026 1.625” x 120” 1.75”
    39554 1.625” x 144” 1.75”
    30179 1.75” x 36” 1.875”
    30180 1.75” x 48” 1.875”
    37027 1.75” x 12” 1.875”
    37028 1.75” x 18” 1.875”
    37029 1.75” x 24” 1.875”
    37030 1.75” x 60” 1.875”
    37031 1.75” x 72” 1.875”
    37032 1.75” x 96” 1.875”
    37033 1.75” x 120” 1.875”
    39546 1.75” x 144” 1.875”
    39547 1.75” x 120” 1.875”
    30181 1.875” x 36” 2”
    30182 1.875” x 48” 2”
    30183 1.875” x 72” 2”
    30184 1.875” x 96” 2”
    37034 1.875” x 12” 2”
    37035 1.875” x 18” 2”
    37036 1.875” x 24” 2”
    37037 1.875” x 60” 2”
    37038 1.875” x 120” 2”
    30193 2.125” x 48” 2.25”
    37040 2.125” x 18” 2.25”
    37041 2.125” x 24” 2.25”
    37042 2.125” x 36” 2.25”
    37043 2.125” x 60” 2.25”
    37044 2.125” x 72” 2.25”
    37045 2.125” x 96” 2.25”
    37046 2.125” x 120” 2.25”
    30194 2.25” x 36” 2.375”
    30195 2.25” x 48” 2.375”
    30196 2.25” x 60” 2.375”
    30197 2.25” x 72” 2.375”
    30198 2.25” x 96” 2.375”
    37047 2.25” x 12” 2.375”
    37048 2.25” x 18” 2.375”
    37049 2.25” x 24” 2.375”
    37050 2.25” x 120” 2.375”
    39135 2.25” x 240” 2.375”
    30199 2.375” x 12” 2.5”
    30201 2.375” x 36” 2.5”
    30202 2.375” x 48” 2.5”
    30203 2.375” x 72” 2.5”
    37051 2.375” x 18” 2.5”
    37052 2.375” x 24” 2.5”
    37053 2.375” x 60” 2.5”
    37054 2.375” x 96” 2.5”
    37055 2.375” x 120” 2.5”
    37039 2.625” x 12” 2.75”
    39530 2.625” x 48” 2.75”
    30204 2.875” x 36” 3”
    30205 2.875” x 48” 3”
    30206 2.875” x 72” 3”
    30207 2.875” x 96” 3”
    37056 2.875” x 12” 3”
    37057 2.875” x 18” 3”
    37058 2.875” x 24” 3”
    37059 2.875” x 60” 3”
    37060 2.875” x 120” 3”
    39099 3.375” x 36” 3.5”
    39382 3.375” x 48” 3.5”
    39221 3.875” x 72” 4”
    39369 3.875” x 60” 4”
    39456 3.875” x 48” 4”
    39639 3.875” x 36” 4”
  • Section 1 Body: 
    • Excellent biodegradability (>60% by DOC Method) essentially non-toxic
    • Non-oil wetting
    • Non-foaming
    • Multiple absorption sites
    • The normal concentration used in the field is 3-5 L/m³
  • Section 1 Body: 
    Part Number Size and Thread
    100829 / 102429 ND 3 m (10 ft)
    102428 ND 1.5 m (5 ft)
    102327 / 102432 HD 3 m (10 ft)
    102431 / 102433 HD 1.5 m (5 ft)
    102140 / 102141 PD 3 m (10 ft)
    102142 / 102143 PD 1.5 m (5 ft)
  • Section 1 Body: 
    Part Number Description
    102109 / 102117 BWL 3 m (10 ft)
    102125 / 102133 BWL 1.5 m (5 ft)
    102110 / 102118 NWL 3 m (10 ft)
    102126 / 102134 NWL 1.5 m (5 ft)
    102111 / 102119 HWL 3 m (10 ft)
    102127 / 102135 HWL 1.5 m (5 ft)
  • Section 1 Body: 
    Part Number Size and Thread Deep Hole or Standard
    102153 / 102155 ND 3 m (10 ft) Deep Hole
    102149 / 102151 NWL 3 m (10 ft) Standard
    102154 / 102156 HD 3 m (10 ft) Deep Hole
    102150 / 102152 HWL 3 m (10 ft) Standard 
  • Section 1 Body: 
    Part Number Metric Length Imperial Length
    102073 / 102072 3 m 10 ft
    102071 / 102070 1.5 m 5 ft
    103298 / 103297 0.6 m 2 ft
  • Section 1 Body: 
    Part Number Metric Length Imperial Length
    102077 / 102076 3 m 10 ft
    102075 / 102074 1.5 m 5 ft
    102786 / 103299 0.6 m 2 ft
  • Section 1 Body: 
    Part Number Size Metric Length Imperial Length
    102081 / 102080 HW 3 m 10 ft
    102079 / 102078 HW 1.5 m 5 ft
    102907 / 102372 HW 0.6 m 2 ft
    102089 / 102088 HWT 3 m 10 ft
    102087 / 102086 HWT 1.5 m 5 ft
    102963 / 102328 HWT 0.6 m 2 ft
  • Section 1 Body: 
    Part Number Size Metric Length Imperial Length
    102085 PW 3 m 10 ft
    102083 PW 1.5 m 5 ft
    102091 / 102090 PWT 1.5 m 5 ft
    102093 / 102092 PWT 0.6 m 2 ft
  • Section 1 Body: 
    Product Number Description
    44104 J Plug 1" Locking Sch 40 
    44106 J Plug 1-1/2" Locking Sch 40/80
    37939 J Plug 2" Locking Sch 40
    46567 J Plug 2" Locking Sch 80
    47369 J Plug 4" Locking Sch 40
    48812 J Plug 4" Locking Sch 80
  • Section 1 Body: 
    Product Number Size Schedule
    37971 2" X 2 TPI BOX 40
    44158 2" X 2 TPI BOX 80
  • Section 1 Body: 
    • Model 800 Viscometer - provides eight precisely regulated speeds for accurate shear rate and gel strength values. Modified with retractable legs, the viscometer fits easily within the case and is completely portable, operating from a 12 Volt battery or standard 115/230 Volt power.
    • Kit-Sized Full Area Filter Press - used for easily measuring filtrate, cake, and conducting chemical analyses.
    • Removable Retort - for measuring the percentage by volume of water, fluids lighter than water, and total solids of a 10 mL sample.
    • Sand Content Kit - consisting of a glass tube, funnel, and mesh sieve, this kit helps determine the volume percent of sand-sized particles in the drilling fluid.
    • pH Paper - used to help determine the chemical characteristics of the drilling fluid.
    • Reagents - contains reagents (many in 8 oz bottles) for chemical analysis of mud/filtrate.
  • Section 1 Body: 
    • Speeds are easily changed with a control knob
    • Shear stress values are displayed on a lighted magnified dial for ease of reading
    • Motor RPM is continuously monitored and automatically adjusted by the pulse power electronic speed regulator to maintain a constant shear rate under varying input power and drilling fluid shear conditions
    • Suitable for both field and laboratory use and uses a motor-driven electronic package to provide drilling fluid engineers with an extremely accurate and versatile tool
    • Conventional oilfield rotor, bob, and torsion springs maintains rheology history and reproducibility between instruments and laboratories (wide variety of bob and torsion springs available for a variety of fluids test)  
    • Operates anywhere in the world without flipping switches or re-wiring
    • Threaded rotor - mechanically attaches to the unit the same way every time
    • Available with retractable legs for placement in kits
  • Section 1 Body: 
    • Model 900 Viscometer is a true Couette coaxial cylinder rotational viscometer
    • Run multiple units on one computer
    • Push button calibration history and graphs available for improved analysis (with ORCADA software)
    • Single button operations on the keypad
    • Routine repairs are easily performed
    • Has the ability to operate accurately at extremely low shear rates (0.01 RPM)
    • Not necessary to stop the motor between speed changes
  • Section 1 Body: 
    • Upgraded Transducer - Provides even more accurate readings at low shear rates. Improved calibration
    • High Pressure - up to 2,500 PSI (17 MPa)
    • High Temperature - up to 500°F (260°C)
    • Low Shear Rates - as low as 0.01 s-1
    • Portable - rugged case makes for easy transport
    • Rugged - designed for use in the field or laboratory
    • Corrosion Resistant - Hastelloy-wetted parts provide extra corrosion control
    • Small Footprint - only 12 × 12 inches (30 × 30 cm). The all-in-one design includes the heating mechanism
    • Versatile - available in 115 or 230-volt models
    • Real Oilfield Geometry - uses traditional Bobs and Rotor for measurements that are easy to translate (shear stress range 0 - 4,000 dynes/cm²)
    • Computer-Control and Data Acquisition - ORCADA software connected via serial port or Ethernet
  • Section 1 Body: 
    • Ultimate in portability
    • Proven test procedures
    • Reliability
    • Small footprint if used in laboratory
    • Accurate, tamper proof temperature controller

    ** Not recommended for testing cuttings **

  • Section 1 Body: 
    • Ultimate in portability
    • Proven test procedures
    • Reliability
    • Small footprint if used in laboratory
    • Accurate, tamper proof temperature controller

    ** Not recommended for testing cuttings **

  • Section 1 Body: 
    • Available in three sizes: 50 mL (for greatest accuracy), 20 mL, and 10 mL
    • Includes all accessories necessary to run a test
    • Rugged, stainless steel carrying case
    • Electronic temperature control:
      • Available on 20 mL and 50 mL sizes
      • Improves accuracy and readability
      • Digital display
      • Provides better reproducibility
    • Power Requirements:
      • 50 mL: 115 Volts at 4.2 Amps or 230 Volts at 2.5 Amps, 50/60 Hz
      • 20 mL: 115 Volts at 4.2 Amps or 230 Volts at 2.5 Amps, 50/60 Hz
    • 10 mL: 115 Volts at 3 Amps or 230 Volts at 1.5 Amps, 50/60 Hz

    ** Not recommended for testing cuttings **

  • Section 1 Body: 
    • Rugged, stainless steel carrying case
    • Electronic temperature control
    • Improves accuracy and readability
    • Digital display
    • Provides better reproducibility
    • Ultimate in portability
    • Small footprint if used in laboratory
    • Accurate, tamper proof temperature controller
    • Includes all accessories necessary to run a test

    ** Not recommended for testing cuttings **

  • Section 1 Body: 
    • Rugged, stainless steel carrying case
    • Electronic temperature control
    • Improves accuracy and readability
    • Digital display
    • Provides better reproducibility
    • Ultimate in portability
    • Small footprint if used in laboratory
    • Accurate, tamper proof temperature controller
    • Includes all accessories necessary to run a test

    ** Recommended for testing cuttings **

  • Section 1 Body: 
    • Rugged, stainless steel carrying case
    • Electronic temperature control
    • Improves accuracy and readability
    • Digital display
    • Provides better reproducibility
    • Ultimate in portability
    • Small footprint if used in laboratory
    • Accurate, tamper proof temperature controller
    • Includes all accessories necessary to run a test

    ** Recommended for testing cuttings **

  • Section 1 Body: 
    • Extremely portable
    • May be operated by filtering upwards, which negate cutting settling on the filter meduim prior to testing
    • Easily obtainable CO2 Bulbs provide pressure
    • Proven design for over 50 years of successful usage
    • Easy to service and obtain replacement parts
  • Section 1 Body: 
    • Stainless steel test cell
    • Built-in pressure regulator
    • Suitable for field and lab use
    • Conforms to API specifications
  • Section 1 Body: 
    • Stainless steel test cell
    • Built-in pressure regulator
    • Suitable for field and lab use
    • Conforms to API specifications
  • Section 1 Body: 
    • Four independent test stations
    • Electronic temperature control
    • Drive pressure and back pressure regulators for each cell
    • Single pressure source
    • Complete with all accessories necessary to run four simultaneous tests
  • Section 1 Body: 
    • Durability: The machined stainless steel construction is stronger, less susceptible to corrosion, and more consistent from unit to unit.
    • Ease of Use: The smooth finish is easy to clean and the laseretched scales are clear and easy to read. The more consistent construction makes calibration easier.
  • Section 1 Body: 
    • Variable-speed controlled
    • Enclosure is constructed of stainless steel for longer life
    • Stainless steel rollers promote a cleaner environment inside the oven
    • Glass-impregnated Teflon® roller bearings extend the life of the rollers and allow for longer maintenance-free service
    • Digital temperature controller that can be read directly from outside the oven
    • Temperature is controlled by an electronic solid state thermostat and operates between 100°F and 450°F (38°C - 232.2°C)
    • Circulating fan greatly improves air circulation within the oven and provides more stable, consistent, and reliable heating
  • Section 1 Body: 
    • Variable-speed controlled
    • Enclosure is constructed of stainless steel for longer life
    • Stainless steel rollers promote a cleaner environment inside the oven
    • Glass-impregnated Teflon roller bearings extend the life of the rollers and allow for longer maintenance-free service
    • Digital temperature controller that can be read directly from outside the oven
    • Temperature is controlled by an electronic solid state thermostat and operates between 100°F and 450°F (38°C - 232.2°C)
    • Circulating fan greatly improves air circulation within the oven and provides more stable, consistent, and reliable heating
  • Section 1 Body: 
    • 260 Gram Capacity
    • 0.0001 Gram Readability
    • Internal Calibration
    • Stability Indicator
    • Mechanical and Software Over/Under Load Protection
    • Low Battery Indicator
    • AC Adapter
    • Auto Tare
    • User Selectable Printing Options
    • User Selectable Communication Settings
  • Section 1 Body: 

    Meter:

    • Wave form: Sine, < 5% total harmonic distortion
    • AC Frequency: 340 ± 10 Hz
    • Output Units: Peak Volts
    • Ramp Rate: 150 ± 10 Volts per second, automatic operation
    • Minimum Output Range: 3 - 2,000 Volts (Peak)
    • Trip Current: 61 ± 5 μA
    • Size: 9.5” × 6.5” × 3.5” (24.1 × 16.5 × 8.9 cm)
    • Weight: 2 lbs. 15 oz. (1.3 kg)
    • Shipping Size: 11” × 11” × 7” (28 × 28 × 18 cm)
    • Shipping Weight: 10 lbs. (4.54 kg)


    Electrode:

    • Housing: Material resistant to oil mud components up to 220°F (105°C)
    • Material: Corrosion-resistant metal
    • Diameter: 0.125” ± 0.001” (3.18 ± 0.03 mm)
    • Spacing (gap): 0.061” ± 0.001” (1.55 ± 0.03 mm) at 72°F (22°C)
  • Section 1 Body: 
    • Equipped with a digital readout for higher accuracy
    • LCD display makes measurements easy to read
    • Built-in calibration tests make calibrations simple
    • Automatic NaCl Measurements - no longer have to manually use a nomograph
    • Lucite® Cell - transparent and removable, making it easy to clean
  • Section 1 Body: 
    • Anodized finish provides better heat transfer than paint
    • Strain relief on the power cable protects wiring from damage
  • Section 1 Body: 
    • Digital Control: The digital control board provides more accurate data than older, analog methods.
    • User-Friendly Interface: The simple, intuitive interface makes testing quick and easy. Functions include pre-set speeds (60, 200, 600, and 1000 RPM), manual speed control, and torque zeroing.
    • Maximum Speed: 1,000 RPM
    • Maximum Torque: 600 inch-pounds
  • Section 1 Body: 
    • Unit may be utilized to test well cements in accordance to API Specification 10
    • Electronic timer measures elapsed time and may be programmed to terminate testFor safety, a pressure relief valve, as well as a safety head with rupture disk are provided
    • Test cell accommodates 8-16 specimens
    • Digital programmable temperature controller
    • Digitally displays temperatures
    • Coolant system quickly cools the test cell
    • Dual compression molds meet ASTM standard C109
  • Section 1 Body: 
    • Maximum Speed: 23,000 RPM
    • 115-Volt, 60 Hz, or 230-Volt, 50 Hz
    • Each can be operated via a 1.25 KVA power supply
    • Size: 45” × 32” × 12” (114 × 81 × 31 cm)
    • Weight: 75 lb (34.1 kg)
    • Crated Size: 45” × 32” × 12” (114 × 81 × 31 cm)
    • Crated Weight: Approximately 215 lb (97.6 kg
    • Two preset mixing speeds and variable speed (For Cement: 4,000 and 12,000 RPM, For Fracturing Fluids: 500 and 1,000 RPM)
    • Mixing Container (For Cement: Stainless Steel, 1 Liter - For Fracturing Fluids: Glass, 1 Liter)
  • Section 1 Body: 
    • Automatically conditions the slurry in-place (1 - 150 RPM)
    • Provides a direct mechanical measurement of static gel strength
    • Simultaneously measures static gel strength and compressive strength (dual-cell units only)
    • Intermittent or continuous measurement under high-temperature, high-pressure conditions
    • Data acquisition system with automatic temperature control included
    • Simple calibration and system check
    • Quick clean up and turn around
  • Section 1 Body: 
    • Automatically conditions the slurry in-place (1 - 150 RPM)
    • Provides a direct mechanical measurement of static gel strength
    • Simultaneously measures static gel strength and compressive strength (dual-cell units only)
    • Intermittent or continuous measurement under high-temperature, high-pressure conditions
    • Data acquisition system with automatic temperature control included
    • Simple calibration and system check
    • Quick clean up and turn around
  • Section 1 Body: 
    • Temperature is maintained via a PID controller, to increase accuracy and reproducibility
    • Unit is operated at atmospheric pressure
    • Process temperature is displayed digitally, for easy reading
    • Heat transfer fluid (oil) is continuously circulated, ensuring a consistent temperature is maintained
    • Slurry container rotational speed is 150 RPM to meet API specifications
    • Dual container design so that two slurries can be conditioned at one time
    • Cooling system included to allow cooling the slurry below room temperature
    • Stainless steel temperature bath resists corrosion, ensuring long life
    • Dead-weight calibration unit helps keeps the unit in calibration, ensuring consistent performance
  • Section 1 Body: 
    • Maximum Pressure: 16,000 PSI (110.3 MPa)
    • Maximum Temperature: 400°F (204.4°C)
    • Temperature Controller: Digital PID 1° Resolution
    • Internal Heater: 2,500 Watt (5,000 Watt Available)
    • Slurry Cup: 150 RPM Rotational Speed; 316 Stainless Steel
    • 220 Volt, 50/60 Hz, 25 Amp electrical power supply
    • Size: 25 × 16 × 20 inches (63.5 × 40.6 × 50.8 cm)
    • Weight: Approximately 215 lb (97.6 kg)
  • Section 1 Body: 
    • Computerized Data Acquisition and Control system provides detailed test information in convenient formats and can control multiple units from one computer. RS-232 and Ethernet connections available.
    • Automatic temperature and pressure control
    • Automatic, programmable variable speed motor (0 - 150 RPM) powered by a magnetic drive
    • Convenient oil reservoir features a cap with built-in funnel to help prevent spills, a removable top and bottom that make cleaning easy, and a sloping bottom that collects sediment for easy removal
    • Visual indicator provides an at-a-glance status update during testing
    • Smaller cell and more efficient cooling system provide quicker cool-down times
    • Small footprint saves valuable lab space
    • Conforms to API Specification 10A (ISO 10426-1) guidelines
  • Section 1 Body: 
    • Small footprint, our new and slim design saves valuable lab space
    • Automatic temperature and pressure control, variable speed motor (0 - 150 RPM) powered by a magnetic drive
    • Oil Reservoir, features a cap with built-in funnel to help prevent spills, a removable top and bottom that makes cleaning easy, and a sloping bottom that collects sediment for easy removal
    • Windows based, Computerized Data Acquisition and Control system, provides detailed test information in convenient formats, and can control multiple units from one computer via RS-232 or Ethernet connection
    • Safety Features, temperature, pressure, and consistency alarms
    • Status indicator, symbolizes (3) selectable ranges of consistency
    • Conforms to API Specification 10 guidelines
  • Section 1 Body: 

    A cement specimen is placed into a sleeve which is then inserted into the Modified Hassler style test cell. Nitrogen is displaced through the cement at various flow rates to determine the permeability.

  • Section 1 Body: 
    • A controlled Nitrogen pressure source (sold separately)
    • A pressure manifold with two regulators (primary and back pressure)
    • A high-pressure test cell
    • Components are fully interchangeable with those marketed by other manufacturers
    • Ideal for laboratory use
    • Safety valves protect against over pressurization
    • High performance hoses, connections, and valves
    • A temperature controlled heating jacket for heating the test cell
    • Gauges monitor nitrogen tank, primary, and back pressures
  • Section 1 Body: 
    • Windows based, Computerized Data Acquisition and Control system: provides detailed test information, precise control, and allows cylindrical and cube-shaped samples
    • Small foot-print: saves valuable lab space and increases efficiency with quick and easy clean up
    • Safety minded: clamshell head design and safety switches protect people and equipment from possible debris during operation
    • Prevents over pressure: a safety head, rupture disk, and high-pressure alarm assembly
    • Proppant Testing: can test proppant according to API Recommended Practice 19°C
    • Self-Aligning platens: easier to load samples and allows for equal force to be applied
    • Communication: operates in standalone or with computer control via RS-232 or Ethernet connections
    • Loading Rates: variable load rate and constant load testing
  • Section 1 Body: 

    The tool outputs standard survey data, such as recorded station depth, inclination, azimuth, gravity highside, magnetic toolface, temperature and more. The magnetometers have been calibrated with high precision and the tool will deliver a reading of the magnitude of the local magnetic field which can be used to detect anomalies in the local Earth magnetic field to identify survey stations of low quality.

    Local magnetic declination and start coordinates can also be set directly in the handheld unit. The OD of the fully-integrated running gear is 35 mm and the system is supplied with three aluminum extension rods to allow the operator to get the gear through and away from the drill bit.


    Power consumption: 0.2W

    Memory: 2GB

    Communication method: Infrared (lrDA)

    Temperature range: -20°C to 70°C

    Dimensions: Diameter 35 mm, length 1210 mm

    Operating time: Typically 100 hours using 7 cells type C (depending on C cell type)

    Battery type: Standard C-cells

    Running gear: 35 mm diameter, fully integrated with instrument

  • Section 1 Body: 

    The isGyro delivers accurate results at high speed: 1 hour's worth of survey data is processed in seconds while data download requires just 4 minutes. This is achieved by our unique combination of advanced sensors, microprocessor systems, efficient data collection and processing techniques.


    Power consumption: 1 W

    Memory: 2 GB

    Communication method: Built in Bluetooth 2.0

    Temperature range: 0°C - 70°C

    Dimensions: Diameter 32 mm, Length 345 mm

    Running gear: 38 mm O.D.

    Battery charge lifetime: 15 hours

    Battery type: Rechargeable NiMH Technology

    Battery dimensions: Diameter 32 mm, Length 420 mm

  • Section 1 Body: 

    Power consumption: 0.2 W

    Memory: 4 GB

    Communication method: Built in Bluetooth 2.1

    Temperature range: -20°C - 70°C

    Dimensions: Diameter 21.56 mm, Length 226 mm

    Running gear: 26 mm O.D.

    Battery charge lifetime: 75 hours

    Battery type: Rechargeable NiMH Technology

    Battery Dimensions: Diameter 21.56 mm, Length 439 mm

  • Section 1 Body: 

    Depramin C is non-hazardous material. In case of inhalation or skin contact, rinse with water. Keep in a dry place and store at room temperature.

  • Section 1 Body: 

    Depramin 96 is non-hazardous material. In case of inhalation or skin contact, rinse with water. Keep in a dry place and store at room temperature.

  • Section 1 Body: 
    • Portable - hauls easily in a pick-up truck
    • Maintenance free - hose off with water
    • Handi-hook available for moving mats around site
    • Easy to handle - holes for rope handles or hooks
    • Competitively priced
    • 100% reusable, 100% recyclable
    • A low cost alternative to fiberglass reinforced mats
    • More cost effective than plywood
  • Section 1 Body: 

    OSKOverpack Spill Kit (approx. absorption capacity = 231 liters/51 gallons): 

    • 100 - sorbent pads
    • 6 - small pillows
    • 2 - large pillows
    • 5 - large socks
    • 2 - small socks
    • 1 - 25 lb. bag granular absorbent
    • 1 - plug pattie (instant stop leak)
    • 1 - neoprene drain cover
    • 2 - disposal bags
    • 2 - pair splash goggles
    • 2 - pair reusable nitrile gloves
    • 2 - poly-coated Tyvek coverall
    • 1 - 95 gal overpack (DOT/UN rated)
  • Section 1 Body: 

    Whenever oil spills or leaks, you may be held responsible for damages. Reasonable precaution is the best security. Outdoors, Oil Sorbent Mat rapidly absorbs the oil which has escaped - both on land and water.

    It gives you the effective means to prevent costly and potentially harmful effects on the environment.

    Supplied in rolls - 3 ft. x 150 ft.

    Available in two different grades:

    • Regular Grade: For indoor shop use and moderate outdoor duty
    • Heavy Duty Grade: Stronger for more demanding outdoor use. Can also be used indoors.
  • Section 1 Body: 
    Sodium Metasilicate (%BWOC) Slurry Density (kg/m³) Slurry Yield (m³/ton) Water Compressive Strength, 24 hr (kpa) Thickening Time (hr:min)
    m³/ton % 50 60
    0 1893 0.929 0.537 44 32889 36613 +4:05 3:10 2:35 ---
    0.15 1737 1.116 0.732 60 12039 15500 3:20 2:37 2:10 ---
    1.0 1737 1.116 0.732 60 13073 14997 2:40 1:34 --- ---
    0.25 1678 1.221 0.830 68 9791 10411 --- --- --- ---
    1.0 1678 1.221 0.830 68 11308 11880 --- --- --- ---
    0.5 1618 1.342 0.952 78 6523 8812 --- 3:30 2:10 ---
    2.0 1618 1.342 0.952 78 9150 9791 1:53 1:28 --- ---
    0.5 1558 1.488 1.100 90 5171 6392 --- --- --- ---
    2.0 1558 1.488 1.100 90 827 7447 --- --- --- ---
    0.75 1498 1.658 1.270 104 2634 4309 +5:00 +5:00 +5:00 +5:00
    2.0 1498 1.658 1.270 104 4365 4502 +5:00 1:43 --- ---
    1.0 1438 1.876 1.490 122 1827 2620 --- --- --- ---
    2.0 1438 1.876 1.490 122 2896 3517 --- --- --- ---
    1.5 1378 2.175 1.795 147 1014 1586 +5:00 +5:00 +5:00 +5:00
    3.0 1378 2.175 1.795 147 1869 1993 +5:00 1:27 --- ---
    2.0 1318 2.588 2.199 180 703 1207 --- --- --- ---
    3.0 1318 2.588 2.199 180 1000 1414 --- --- --- ---
  • Section 1 Body: 

    This product mixes easily in cold water with moderate agitation. Sodium Silicate is corrosive. Wear the appropriate safety goggles and protective equipment when handling this product.

  • Section 1 Body: 

    Bentonite

    %

    Slurry Weight

    kg/m³

    Mix Water

    m³/ton

    Slurry Yield

    m³/ton

    0 1893.3 0.440 0.757
    2 1785.4 0.547 0.870
    4 1713.5 0.653 0.984
    6 1665.6 0.759 1.097
    8 1593.7 0.867 1.218
    10 1569.7 0.971 1.323
    12 1521.8 1.078 1.440
    16 1461.9 1.291 1.880
  • Section 1 Body: 

    Silica Flour is very stable and is not susceptible to fire, explosion or decomposition. The finely divided dust may cause eye and respiratory irritation. Use good industrial hygiene practice and wear goggles and a dust mask when handling the material. 

  • Section 1 Body: 

    Calcium can be dry blended or prehydrated in water. The mixing of calcium and water generates heat. 

  • Section 1 Body: 
    Dry Grout Water Usable Slurry Solids Content
    50lb 14 gal 17 gal 30.0%
    50lb 15 gal 18 gal 28.6%
    50lb 16 gal 19 gal 27.3%
  • Section 1 Body: 

    In cable tool operations, these granular Enviroplug No.8 can be used to grout the casing as it is being driven. A hole should be dug at the surface 6 to 8 inches larger than casing and 12 to 14 inches deep. Once the driving has begun, fill this hole with Enviroplug No.8. The granules will follow the drive shoe downward as driving continues creating a bentonite collar around the casing.

  • Section 1 Body: 

    Dry Driven Casing: In cable tool operations, these granular Enviroplug No.16 can be used to grout the casing as it is being driven. A hole should be dug at the surface 6 to 8 inches larger than casing and 12 to 14 inches deep. Once the driving has begun, fill this hole with Enviroplug No.16. The granules will follow the drive shoe downward as driving continues creating a bentonite collar around the casing.

    Pumpable Grout Seals: Enviroplug No.16 can be used in a pumpable slurry mix to grout wells or abandon holes. Agitate until the polymer is dispersed, then add 50 pounds of Enviroplug No.16. Pump immediately.

    CAUTION: Continued agitation will result in extreme viscosity and become unpumpable.

  • Section 1 Body: 

    Dry Driven Casing: In cable tool operations, these granular Enviroplug No.20 can be used to grout the casing as it is being driven. A hole should be dug at the surface 6 to 8 inches larger than casing and 12 to 14 inches deep. Once the driving has begun, fill this hole with Enviroplug No.20. The granules will follow the drive shoe downward as driving continues creating a bentonite collar around the casing.

    Pumpable Grout Seals: Enviroplug No.20 can be used in a pumpable slurry mix to grout wells or abandon holes. Agitate until the polymer is dispersed, then add 50 pounds of Enviroplug No.20. Pump immediately.

    CAUTION: Continued agitation will result in extreme viscosity and become unpumpable. 

  • Section 1 Body: 

    Cased Holes or Uncased Holes: For decommissioning cased or uncased holes larger than 3" diameter, Enviroplug Coarse can be used. If static water is present, pour chips from the bag at a rate of 1 1/2 to 2 minutes per 50 pounds. A funneling device with a 2" opening can be used to insure a constant flow of material into the hole. Should the water level be quite low - a screen can be used to drop out "fines" from the material before entering the hole. 

    Abandoning Dug Wells: Completely filling dug wells with bentonite chips can be very expensive and unnecessary. To economically decommission and stabilize dug wells, Enviroplug Coarse should be placed from the bottom section upward to 3 feet above the water bearing zone. Alternate sections of sand, fine gravel, or clay upward with a 12" layer of Enviroplug Coarse every 5 to 6 feet. Any of the above methods should be finished off approximately 3 feet below the surface, then filled with native soil or cement depending upon local regulatory requirements.

    Seismic Shot Holes: After the hole is drilled and charge is placed, pour Enviroplug Coarse slowly into the hole (1½ - 2 minutes per bag). In wet hole conditions add enough Enviroplug Coarse to fill up to the static water level. In a dry hole, add 2 to 4 bags directly over the charge. Where auger drills are used or where water is injected, pour 2 bags per 50 feet of hole depth.

  • Section 1 Body: 
    Product Number Description
    11052 3/8" Uncoated Tablets
    11052 3/8" Coated Tablets
    11056 1/4" Uncoated Tablets
    11057 1/4" Coated Tablets
  • Section 1 Body: 

    Soda Ash is used to precipitate calcium in make up water, which softens the water and elevates the water's pH level prior to mixing mud additives. This is desirable since bentonite and some polymers provide better yield in soft, slightly alkaline water.

  • Section 1 Body: 

    Standard safety equipment should be worn when handling this product. For further handling and safety instructions consult Material Safety Data Sheet.

  • Section 1 Body: 

    Oilfield Cementing: Typical concentration can vary from 0.5% to 2% BWOC. CRM-19 can be used to disperse weighted slurries up to 2250 kg/m³, but use in low-density slurries can result in an excess of free water leading to particle segregation. This is typical of cement dispersants, and laboratory testing should be carried out before recommending for field use. Excessive dispersant loading can lead to slurry disintegration, severely retarded set and possible bridging off mid-job.

    Other: CRM-19 can be used as a dispersing mechanism for manufacture of gypsum wallboard products, and other similar industrial applications.

  • Section 1 Body: 

    Losing the fluid phase of a slurry into the soil can compromise the integrity of the formations. This can allow materials to fall in against the segments, increasing drag and elevating jacking pressures. Micro-Gel slurries protect against excessive fluid loss by laying down a thin tough filter cake that limits the water phase influence on surrounding formations. Traditionally used slurries demonstrate fluid loss values nearly twice the level of Micro-Gel.

  • Section 1 Body: 
    • Manufactured to exceed API 13A, Section 9 specifications
    • 200 mesh viscosity builder
    • Yields excellent fluid loss characteristics
    • Assists in stabilizing the borehole or trench walls
  • Section 1 Body: 

    Direct contact with wet cement should be avoided. If contact occurs, the skin should be washed with water as soon as possible. Exposure can cause serious, potentially irreversible tissue destruction in the form of chemical (caustic) burns. If cement gets into the eyes, immediately rinse thoroughly with water and seek medical attention. 

  • Section 1 Body: 
    Part Number Length Description
    30682 5' H3 Kleer-Kore Tube
    30683 5' N3 Kleer-Kore Tube
    39595 5' P3 Kleer-Kore Tube
    39163 10' N3 Kleer-Kore Tube
    39214 10' H3 Kleer-Kore Tube
    39631 10' P3 Kleer-Kore Tube
  • Section 1 Body: 
    View Description Part Number
    1. Outer Tube 3m (10ft) S637059
    2. Inner Tube 3m (10ft) S058025
      Split Inner Tube 3m (10ft) S207251
    3. Latch Head Assembly S237116
    3a.  Headbase (Top) S385105
    3b. Headbase (Bottom) S385097
    3c. Spring, Red (Top) S014906
    3d. Spring, Gold (Bottom) S014914
    3e. Pins (4 required) 0006019921
    3f. Pin 376008005
    3g. Quadlatch Fingers S356148
    4.  Landing Shoulder Nut S430125
    5. Bearing Assembly S086141 
    5a. Bearing Shaft  S642141
    5b. Thrust Bearing (2 Required)  S093139 
    5c.  Bearing Retainer  S642166 
    5d.  Bearing Housing  S161050 
    5e.  By-Pass Adapter  S232067 
    5f.  By-Pass Ball  S043202 
    5g.  O-Ring (Upper) 006887819 
    5h. O-Ring (Lower) 006230064
    6. Inner Tube Connector S637158
      Split Inner Tube Connector S637067
    7. Landing Shoulder Ring S439176
    8. Basket Catcher 3" Core 25395021
    9. Upper Inner Tube Shoe 3" Core  S637091
    10. Core Lifter Skirtless HF 3" Core 48971
    11. Lower Pilot Inner Tube Shoe 3" Core S100116
    12. Outer Tube Sub Stabilized to 5.470 3760008027
  • Section 1 Body: 
    View Description Part Number
    1. Sleeve 25549031
    2. Socket Head Cap Screw (2 Required) S029045
    3. Plunger 25270042
    4. Pawl S552035
    5. Spring S553033
    6. Retriever S270034
    7. Capscrew 006009567
    8. Overshot Cocking Tool S033740
  • Section 1 Body: 
    Part Number Description
    42007 Liners
    42003 Liner Packaging
    47224 Chrome Piston Rod
    41828 Rod Packaging
    42181 Piston API-3
    42182 Piston Repair Kit
    42392 Valve Gravel Rubber
    42390 Seat Gravel
  • Section 1 Body: 

    As a Pill: In a separate tank, mix Extra High Yield Bentonite to a Marsh Funnel Viscosity of 45 to 65 seconds. Add Plugz-It Max at a rate of 20 to 40 pounds per 100 gallons. Mix in small batches, 50 to 100 gallons at a time.

    1. Add Plugz-It Max slowly into “Pill” tank and circulate for 1 to 2 minutes. 
    2. Once the appropriate quantity is added, quickly pump from the “Pill” tank into place, pulling the drill steel back slowly as the mixture is pumped into the loss zone. 
    3. Pump pressure should remain elevated while pumping to insure Plugz-It Max is being squeezed into fractured or unconsolidated zones. 
    4. Once all the materials is in place, pullback 5 to 10 feet and continue to pump in order to purge the drill string. Once in place the Plugz-It Max pill should set for 20 to 30 minutes, allowing for complete hydration and swelling to take place. Circulation should be restored at this point. 
    5. Advance back into the hole slowly, using low pump pressure, circulating as you progress and continue the drilling operation. If mud loss is still a problem, repeat the process. 

    At this first sign of mud loss, Plugz-It Max can be added slowly at the suction to be carried by the fluid into the loss zone.

  • Section 1 Body: 
    Part Number Description
    30476 2" x 24" AWJ Lynac Sampler HT 4TPI 
    30462 2" AWJ Lynac Head Assmbly 
    30489 2" Basket Retainer - Soft
    30467 2" x 24" Lynac Split Tube HT 4TPI
    30486 2" Blunt Lynac Shoe HT 4TPI
    47306 AWJ Drill Rod - 2'
    47300 Cap Screw 3/8 - 16 for 3" Head Assembly
    47295 AWJ Head Assembly
    47222 3" x 30" x 4 Hole Steel Shelby Tube
    41261 3" x 24" x 4 Hole Steel Shelby Tube
    46260 Orange Plastic Cap Tapered - 3" 
  • Section 1 Body: 

    Super-Sweep Fiber is added to a variety of drilling fluids to increase the flow and removal of solids within a well-bore application. Super-Sweep Fiber suspends easily and uniformly in fresh water, salt water, water-based drilling muds, allowing it to effectively transport solids out of the drilling environment. Super-Sweep Fiber does not affect the chemistry nor increase the viscosity of the drilling fluid.

  • Section 1 Body: 

    Aquatreat H2S can be added directly to the mud system or metered into the system with a positive displacement pump. Aquatreat H2S is very toxic avoid breathing vapor and contact with eyes, skin or clothing. Keep container closed when not in use. Use this product in a well-ventilated area and wear protective clothing (see MSDS).

  • Section 1 Body: 

    Graphite Powder is added to the mud system through the mud-mixing hopper. Because it is extremely fine, it is recommended that a dust mask and goggles be worn while the graphite is being mixed. 

    Note: Graphite Powder will have the same effect as ball bearings on any hard surface.  Post warning signs if spilled and sweep up immediately.

  • Section 1 Body: 
    Part Number Description
    102580 BWL Rod Box to Solid Blank
    102582 BWL Rod Pin to Solid Blank
  • Section 1 Body: 
    Part Number Description
    102584 BWL Rod Box to Tubing Blank
    102586 BWL Rod Pin to Tubing Blank
  • Section 1 Body: 
    Part Number Description Hoisting Weight
    100669 AW Rod Pin to BWL Rod Pin 5,000 LB
    100671 NW Rod Pin to BWL Rod Pin 10,000/30,000 LB
    102571 NW Rod Pin to BWL Bullnose 10,000/30,000 LB
  • Section 1 Body: 
    Part Number Description
    100680 BWL Rod Box to BW Rod Pin (Rod to Casing)
    100679 BWL Rod Box to AW Rod Pin (Rod to Rod)
  • Section 1 Body: 
    Part Number Description
    102575 BWL Rod Box to BW Casing Pin
  • Section 1 Body: 
    Part Number Description
    102573 BWL Rod Box to BD Rod Pin
  • Section 1 Body: 
    Part Number Description
    102579 BWL Water Saver Sub
  • Section 1 Body: 
    Part Number Description
    100669 AW Rod Pin to BWL Rod Pin (Compact)
    100670 BW Rod Pin to BWL Rod Pin (Universal)
  • Section 1 Body: 
    Part Number Description Crown Waterway Configuration
    103246 N Carbonado W Wide Waterway
    103548 N Carbonado Tapered Wide Waterway
  • Section 1 Body: 
    Part Number Description
    103350 BW Casing Bit
    103351 NWL Casing Bit
  • Section 1 Body: 
    Part Number Description
    101016 BW Level 1 Casing Shoe
    101006 BW Level 2 Casing Shoe
    103827 BW Carbonado Casing Shoe
  • Section 1 Body: 
    Part Number Drilling Parameter Edge Series Waterway Configuration
    101045 B 2-4 Edge 2 Abrasive Standard
    101218 B 2-4 Edge 2 Abrasive Wide
    101206 B 4-6 Edge 5 Standard
    101032 B 4-6 Edge 5 Wide
    101275 B 6-7 Edge 6 Standard
    101254 B 6-7 Edge 6 Wide
    102711 B 6-8 Edge 6 Abrasive Standard
    102785 B 6-8 Edge 6 Abrasive Wide
    103054 B 7-8 Edge 7 Standard
    103987 B 7-8 Edge 7 Superflush
    101255 B 6-8 Edge 7 Endurance Standard
    101274 B 6-8 Edge 7 Endurance Wide
    101730 B 7-8 Edge 8 Standard
    103228 B 7-8 Edge 8 Wide
    103705 B 5-9 Edge 8 Abrasive Standard
    103768 B 5-9 Edge 8 Abrasive Wide
    103893 B 7-9 Edge 8 Endurance Standard
    102729 B 7-9 Edge 8 Endurance Wide
    101064 B 7-10 Edge 9 Standard
    100925 B 7-10 Edge 9 Wide
    101065 B 7-9 Edge 9 Endurance Standard
    101066 B 7-9 Edge 9 Endurance Wide
    103055 B 9-10 Edge 10 Standard
    102762 B 9-10 Edge 10 Wide
  • Section 1 Body: 
    Part Number Description
    100868 B Standard Reaming Shell
    103097 B Stabilized Reaming Shell
    101654 BTK Standard Reaming Shell
    101655 BTW Standard Reaming Shell 
  • Section 1 Body: 
    Part Number Description
    102274 NWL (T11) Rod Shoe 
    102663 NWL (T12) Rod Shoe
  • Section 1 Body: 
    Part Number Description Qty
    101938 Casing Advancer Assembly -
    102001 Inner Assembly, Casing Advancer -
    101876 Spearhead 1
    100453 Nord-Lock Washer 1
    101878 Release Shaft 1
    101879 Latch Body 1
    101881 Latch Shoe 2
    101883 Spring 2
    101884 Locating Pin 2
    101885 Stop Latch Set 1
    101887 Stop Latch Pin 1
    101889 Split Cotter Pin 2
    101890 Stop Latch Spring 1
    101891 Spacer Set 1
    101893 Bit Sub 1
    101895 Loading Sleeve 1
    101942 Driver 1
  • Section 1 Body: 
    Part Number Description Qty
    101389 Compact Plus Water Swivel Spares -
    101354 Wavy Washer 2
    101355 O-Ring, Upper 6
    101356 Swivel Packing Set 3
    101357 Wear Sleeve, Slotted 2
    101359 Ball Bearing 1
    101361 O-Ring, Lower 6
    101363 Thrust Bearing 1
    101365 Felt Seal 2
  • Section 1 Body: 
    Part Number Description Qty
    101388 Water Swivel Assembly, Compact Plus -
    101353 Swivel Cap 1
    101354 Wavy Washer 1
    101355 O-Ring, Upper 1
    101356 Swivel Packing Set 1
    101357 Wear Sleeve, Slotted 1
    101358 Packing Cage 1
    101359 Ball Bearing 1
    101360 Swivel Body, Upper 1
    101361 O-Ring, Lower 1
    101362 Spindle 1
    101363 Thrust Bearing 1
    101364 Swivel Body, Lower 1
    100461 Grease Fitting 1
    101365 Felt Seal 1
  • Section 1 Body: 
    Part Number Description Qty
    102286 OD Gauge Assembly -
    102396 OD Gauge, Drill Rod New 1
    102398 OD Gauge, Drill Rod Wear 1
    101084 Lock Nut, OD Gauge 1
    101083 Flat Washer, OD Gauge 2
    101082 Hex Bolt, OD Gauge 1
    102400 Wear Sample -
  • Section 1 Body: 
    Part Number Description Qty
    101104 Gauge Assembly, Bit & Shell -
    101112 Gauge, Max New Shell 1
    101113 Gauge, Min New Shell 1
    101114 Gauge, Max New Bit / Worn Shell 1
    101115 Gauge, Min New Bit 1
    101128 Hex Bolt, 1/4-20 UNC x 2" Long, Zinc Plated 1
    101129 Washer, 17/64" ID x 1/2" OD, Zinc Plated 2
    101130 Nylock Nit, 1/4-20 UNC, Zinc Plated 1
  • Section 1 Body: 
    Part Number Description Qty
    100738 Core Barrel Assembly, 3 m (10 ft) -
    100699 Core Barrel Assembly, 1.5 m (5 ft) -
    100768 Locking Coupling, Conventional, Tang
    100735 Adaptor Coupling
    100737 Landing Ring 1
    100726 Outer Tube, 3 m (10 ft) 1
    100758 Outer Tube, 1.5 m (5 ft) -
    100734 Inner Tube Stabilizer 1
    100700 Head Assembly 1
    100725 Inner Tube, 3 m (10 ft) 1
    100757 Inner Tube, 1.5 m (5 ft) -
    100730 Stop Ring 1
    100731 Core Lifter, Slotted 1
    100733 Core Lifter Case 1

     

    Options
    Part Number Description
    100739 Locking Coupling, Conventional, No Tang
    100736 Locking Coupling, Full Hole, Tang
    100763 Locking Coupling, Full Hole, No Tang
    100732 Core Lifter, Fluted
    101566 Core Lifter, Smooth
    101623 Core Lifter, Slotted, Diamond Coated
    101624 Core Lifter, Fluted, Diamond Coated
    100776 Outer Tube 3 m (10 ft) C/P
    100775 Outer Tube 1.5 m (5 ft) C/P
    100761 Inner Tube 3 m (10 ft) C/P
    100760 Inner Tube 1.5 m (5 ft) C/P
    100644 Core Barrel Plug
  • Section 1 Body: 
    Conversion Kit
    Part Number Description Qty
    101423 Link-Latch to Edge Latch Conversion Kit -
    100715 Latch 2
    100722 Latch Spring 1
    100701 Latch Retracting Pin 2
    100702 Latch Pivot Pin 1
    100874 Drift Pin Tool 1
    101427 Conversion Instructions 1
    101152 Parts Pouch 1

    To simplify the conversion of your current core barrel systems to the Edge Latch system, Di-Corp offers a conversion assembly which can be attached to the spindle of most systems.

    Conversion Head Assembly
    Part Number Description Qty
    101959 Core Barrel Conversion Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 1
    100712 Spearhead Base 1
    100701 Latch Retracting Pin 2
    100713 Latch Retracting Case 1
    100714 Latch Body, Upper 1
    100702 Latch Pivot Pin 1
    100722 Latch Spring 1
    100715 Latch 2
    100716 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100717 Latch Body, Lower 1
    100703 Lock Washer 1
  • Section 1 Body: 
    Part Number Description Qty
    100700 Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Spring Pin, ø7/16" x 1" Long 1
    100712 Spearhead Base 1
    100701 Latch Retracting Pin 2
    100713 Latch Retracting Case 1
    100714 Upper Latch Body 1
    100702 Latch Pivot Pin 1
    100722 Latch Spring 1
    100715 Latch  2
    100716 Landing Shoulder 1
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 1
    100717 Lower Latch Body 1
    100703 Lock Washer 1
    100704 Hex Nut 1
    100718 Spindle 1
    100705 Shut Off Valve, Hard 2
    100706 Shut Off Washer 2
    100707 Spindle Bearing 2
    100719 Spindle Bushing 1
    100709 Compression Spring 1
    100711 Self Locking Nut 1
    100721 Inner Tube Cap Assembly without Thread Protector 1
    100639 Thread Protector, Inner Tube Cap 1

     

    Options
    Part Number Description
    100551 Landing Indicator Bushing without OD Groove
    100582 Shut Off Valve, Soft
    101818 Solid Spindle Spacer
    101152 Parts Pouch
    101821 Inner Tube Cap Assembly with Thread Protector
    100611 Fluid Retention Kit
  • Section 1 Body: 
    Inner Tube Cap Assembly without Thread Protector
    Part Number Description Qty
    100721 Inner Tube Cap Assembly without Thread Protector -
    100720 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100724 Stainless Steel Ball, 3/4" 1
    100723 Check Valve Body 1

     

    Inner Tube Cap Assembly with Thread Protector
    Part Number Description Qty
    101821 Inner Tube Cap Assembly with Thread Protector -
    100720 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100724 Stainless Steel Ball, 3/4" 1
    100723 Check Valve Body 1
    100639 Thread Protector, Inner Tube Cap 1

    If drilling in ground conditions where the loss of costly drilling fluids becomes a problem, it may be necessary to replace the Landing Indication components with optional Fluid Retention parts which act like a check valve to maintain a column of fluid in the drill string.

    Fluid Retention Kit
    Part Number Description Qty
    100611 Fluid Retention Kit -
    100452 Stainless Steel Ball, ø22mm 1
    100612 Bushing, Fluid Retention 1
    101138 Bushing, Heavy Mud Fluid Retention 1
    100630 Fluid Retention Compression Spring, Light 1
    100634 Fluid Retention Compression Spring, Medium  1
  • Section 1 Body: 
    Part Number Description Qty
    103229 Core Barrel Spares Kit -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Coiled Spring Pin, ø7/16" x 1" Long 2
    100701 Latch Retracting Pin 2
    100722 Latch Spring 2
    100715 Latch 4
    100702 Latch Pivot Pin 2
    100452 Stainless Steel Ball, ø22mm 1
    100468 Landing Indicator Bushing with OD Groove 2
    100716 Landing Shoulder 1
    100704 Hex Nut 1
    100705 Shut Off Valve, Hard 4
    100707 Bearing, Upper 2
    100711 Self Locking Nut 1
    100461 Grease Fitting 2
    100730 Stop Ring 2
    100731 Core Lifter, Slotted 20
    100733 Core Lifter Case 4
    100737 Landing Ring 1
    100734 Inner Tube Stabilizer 2
  • Section 1 Body: 
    Part Number Description
    100708 Inner Tube Coupling
    100762 Inner Tube Extension, Stabilized (10") Reaming Shell
    101810 Inner Tube Extension, Double Stabilized (18") Reaming Shell
  • Section 1 Body: 
    Part Number Description Qty
    101169 Overshot Assembly -
    101809 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    101157 Cable Swivel Body 1
    101158 Jar Staff 1
    101161 Jar Tube Assembly 1
    101164 Locking Sleeve 1
    101162 Hex Nut, 9/16" UNC 1
    101163 Nord-Lock Washer 1
    101165 Overshot Head Body 1
    100533 Set Screw, 3/8" UNF x 3/4" NYLOK 1
    100888 Compression Spring, Lifting Dog 1
    100889 Lifting Dog 2
    101166 Lifting Dog Pivot Pin 1
    101167 Upper Sway Pin 1
    101558 Spring Pin, 3/16" x 1-3/8" 1
    101168 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100774 Overshot Loading Funnel 1
  • Section 1 Body: 
    Part Number Description Qty
    102900 Overshot Assembly, Rolling -
    101809 Overshot Head Assembly -
    102899 Upper Overshot, Rolling 1
    101165 Overshot Head Body 1
    100533 Set Screw, 3/8" UNF x 3/4" NYLOK 1
    100888 Compression Spring, Lifting Dog 1
    100889 Lifting Dog 2
    101166 Lifting Dog Pivot Pin 1
    101167 Upper Sway Pin 1
    101558 Spring Pin, 3/16" x 1-3/8" 1
    101168 Pin Lock 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100774 Overshot Loading Funnel 1
  • Section 1 Body: 
    Part Number Description Qty
    101855 Overshot Spares Kit -
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 2
    100461 Grease Fitting 1
    101162 Hex Nut, 9/16" UNC 1
    100888 Compression Spring, Lifting Dog 1
    100889 Lifting Dog 2
    101166 Lifting Dog Pivot Pin 1
    101167 Upper Sway Pin 1
    101558 Spring Pin, 3/16" x 1-3/8" 1
    101168 Pin Link, Overshot 2
    100539 Self Locking Cap Screw 4
  • Section 1 Body: 
    Product Number Product Name Packaging
    19642 Well Sand #0 50lb
    19643 Well Sand #1 50lb
    19644 Well Sand #2 50lb
    19645 Well Sand #3 50lb
  • Section 1 Body: 
    • Superior shelf life - does not separate like other polymer suspensions
    • Easily mixed in liquid form
    • Requires minimum amounts of shear to fully hydrate
    • Reduces footprint when compared to alternatives like organophilic clays
    • Greatly increases the speed and overall yield when compared to liquid guar suspensions
  • Section 1 Body: 
    • Converts quickly between 12 Volt DC, 110 Volt AC or Propane in minutes
    • 4 Point Lifting Eyes for easy helicopter slinging and lifting
    • Coils tested to withstand 1500 PSI pressure
    • Heavy Duty Frame
    • All Weather Burner Guard
    • Plug in accessories and safety equipment
    • Tilts up on end for draining water and easy burner changes
    • Full Flow 1” I.D. Coil
  • Section 1 Body: 

    Optimal treatment concentration will vary depending on the specific application. 

    Earth Pro Bitu-Seal is typically used in the concentrations ranging from 10 to 30 kg/m3 and is added directly to the mud system. Avoid breathing dust.

    Consult the MSDS, safety posters, and/or product label before use, and use personal protective equipment as advised.

  • Section 1 Body: 

    Earth Pro Brine-Lube reduces friction in areas where the drill string comes into contact with formation or casing. It may be added as a percentage (1.0-3.0% by volume) of the fluid system where torque and drag are a continuous problem.

    Soft shale will have fewer tendencies to adhere to bits and drill collars when Earth Pro Brine-Lube is present in the drilling fluid.

    To minimize bit balling add 6.0-12.0 L/m³ Earth Pro Brine-Lube and maintain this concentration with additions at the pump suction.

    To help prevent differential sticking maintain 15-25.0 L/m³ of Earth Pro Brine-Lube in the mud system.

  • Section 1 Body: 

    Under normal conditions, for a program with a corrosion level of ≥ 25 mpy, initially add 5 L/m³ Earth Pro Brine-Cor. Severe corrosion may require higher concentrations.

    To assess the requirement of Earth Pro Brine-Cor in any condition, it is best to use a corrosion rate method such as corrosion ring analysis or an instantaneous corrosion monitor. If high corrosion rates persist and are determined to be oxygen related, supplemental additions of an oxygen scavenger such as Earth Pro Brine-Oxy should be added to the system.

    Earth Pro Brine-Cor may be used in conjunction with Earth Pro Brine-Oxy brine oxygen scavenger and Earth Pro Brine-Lube brine lubricant.

  • Section 1 Body: 

    Earth Pro Brine-Oxy can be added directly to the mud system. The required amount is adjusted based on the amount of dissolved oxygen.

    Maintain an excess of Earth Pro Brine-Oxy at any time. Residual scavenger in the mud can be measured with test kit purchased through Di-Corp.

    Avoid contact with eyes and skin. In case of contact, immediately wash with plenty of water. Flush eyes with flowing water immediately and continuously for twenty minutes. See a physician if necessary. Remove contaminated clothes and shoes and wash before re-use.

  • Section 1 Body: 

    Myacide GA25 is corrosive and will cause irreversible eye damage.  Wear suitable protection for eyes and skin and ensure there is adequate ventilation in the mixing area.

  • Section 7 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 25lb sack

  • Section 7 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kg pails

  • Section 7 Body: 

    WHMIS: Controlled (see MSDS)

    TDG: Not regulated

    Packaging: 20kg bag

  • Section 7 Body: 
    Part Number Description Crown Waterway Configuration
    104039 S Carbonado W Face-Discharge Waterway
  • Section 7 Body: 
    Part Number Drilling Parameter Edge Series Waterway Configuration
    101215 H 2-4 Edge 2 Abrasive Superflush
    101235 H 2-4 Edge 2 Abrasive Wide
    100957 H 4-6 Edge 5 Superflush
    100986 H 4-6 Edge 5 Wide
    102100 H 6-8 Edge 6 Abrasive Superflush
    101847 H 6-8 Edge 6 Abrasive Wide
    102181 H 6-7 Edge 6 Superflush
    101073 H 6-7 Edge 6 Wide
    103255 H 7-8 Edge 7 Superflush
    101574 H 7-8 Edge 7 Wide
    101238 H 6-8 Edge 7 Endurance Superflush
    101246 H 6-8 Edge 7 Endurance Wide
    103659 H 5-9 Edge 8 Abrasive Wide
    102099 H 7-8 Edge 8 Superflush
    101795 H 7-8 Edge 8 Wide
    102300 H 7-9 Edge 8 Endurance Superflush
    101854 H 7-9 Edge 8 Endurance Wide
    100875 H 7-10 Edge 9 Standard
    100856 H 7-10 Edge 9 Superflush
    102105 H 7-10 Edge 9 Wide
    101069 H 7-9 Edge 9 Endurance Superflush
    101068 H 7-9 Edge 9 Endurance Wide
    102975 H 9-10 Edge 10 Superflush
    102302 H 9-10 Edge 10 Wide
  • Section 7 Body: 
    Part Number Description Qty
    101389 Compact Plus Water Swivel Spares -
    101354 Wavy Washer 2
    101355 O-Ring, Upper 6
    101356 Swivel Packing Set 3
    101357 Wear Sleeve, Slotted 2
    101359 Ball Bearing 1
    101361 O-Ring, Lower 6
    101363 Thrust Bearing 1
    101365 Felt Seal 2
  • Section 7 Body: 
    Part Number Description Qty
    101865 Water Swivel Assembly, Compact Plus -
    101864 Swivel Cap 1
    101354 Wavy Washer 1
    101355 O-Ring, Upper 1
    101356 Swivel Packing Set 1
    101357 Wear Sleeve, Slotted 1
    101358 Packing Cage 1
    101359 Ball Bearing 1
    101360 Swivel Body, Upper 1
    101361 O-Ring, Lower 1
    101362 Spindle 1
    101363 Thrust Bearing 1
    101364 Swivel Body, Lower 1
    100461 Grease Fitting 1
    101365 Felt Seal 1
  • Section 7 Body: 
    Part Number Description Qty
    100953 Core Barrel Assembly, 3 m (10 ft) -
    100952 Core Barrel Assembly, 1.5 m (5 ft) -
    101542 Locking Coupling, Conventional, No Tang
    100766 Drive Coupling
    100440 Landing Ring 1
    100545 Outer Tube, 3 m (10 ft) 1
    100588 Outer Tube, 1.5 m (5 ft) -
    100444 Inner Tube Stabilizer 1
    100932 Head Assembly 1
    100550 Inner Tube, 3 m (10 ft) 1
    100626 Inner Tube, 1.5 m (5 ft) -
    100434 Stop Ring 1
    100424 Core Lifter, Slotted 1
    100429 Core Lifter Case 1

     

    Options
    Part Number Description
    100741 Locking Coupling, Full Hole, No Tang
    100551 Landing Indicator Bushing, No OD Groove
    100583 Shut-Off Valve, Soft
    101819 Solid Spindle Spacer
    100425 Core Lifter, Fluted
    100846 Core Lifter, Slotted, Diamond Coated
    100849 Core Lifter, Fluted, Diamond Coated
    100641 Core Lifter, Smooth
    101100 Graphite Core Barrel Plug
    101105 Gauge Assembly, Bit & Shell
    100780 Outer Tube, Chrome Plated, 3.0 m (10 ft)
    100779 Outer Tube, Chrome Plated, 1.5 m (5 ft)
    101688 Inner Tube, Chrome Plated, 3.0 m (10 ft)
    101852 Inner Tube, Chrome Plated, 1.5 m (5 ft)
    101152 Parts Pouch
    100607 Fluid Retention Kit
    102452 Quick Coupler, #16 NPT Female
  • Section 7 Body: 
    Part Number Description Qty
    100932 Head Assembly -
    100462 Spearhead Point 1
    100447 Spearhead Spring 1
    100463 Detent Plunger 1
    100448 Spring Pin, ø7/16" x 1" Long 1
    100796 Spearhead Base 1
    100798 Latch Locking Spring 1
    100805 Latch Locking Pin 1
    100449 Latch Retracting Pin 2
    100797 Latch Retracting Case 1
    100807 Latch Retracting Case Pin 1
    100804 Latch Body, Upper 1
    100451 Latch Pivot Pin 1
    100450 Latch Spring 1
    100808 Latch 2
    100827 Spring Seat 1
    100801 Latch Retracting Case Spring 1
    100826 Spring Sleeve 1
    100828 Spring Cavity Bushing 1
    100809 Latch Body Adaptor 1
    100764 Pump-In Seal 2
    100810 Latch Body Seal Seat 1
    100452 Stainless Steel Ball 1
    100468 Landing Indicator Bushing, OD Groove 1
    100553 Landing Shoulder 1
    100470 Latch Body, Lower 1
    100453 Nord-Lock Washer 1
    100454 Lock Nut 1
    100471 Spindle 1
    100455 Shut-Off Valve, Hard 2
    100456 Shut-Off Washer 2
    100457 Spindle Bearing, Upper 1
    100472 Spindle Bushing 1
    100458 Spindle Bearing, Lower 1
    100459 Compression Spring 1
    100460 Self Locking Hex Nut 1
    100475 Inner Tube Cap Assembly 1

     

  • Section 7 Body: 
    Inner Tube Cap Assembly without Thread Protector
    Part Number Description Qty
    100502 Inner Tube Cap Assembly without Thread Protector -
    100501 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100452 Stainless Steel Ball, ø22mm 1
    100474 Check Valve Body 1

     

    Inner Tube Cap Assembly with Thread Protector
    Part Number Description Qty
    101823 Inner Tube Cap Assembly with Thread Protector -
    100501 Inner Tube Cap Body 1
    100461 Grease Fitting 1
    100452 Stainless Steel Ball, ø22mm 1
    100474 Check Valve Body 1
    100603 Thread Protector, Inner Tube Cap 1

    If drilling in ground conditions where the loss of costly drilling fluids becomes a problem, it may be necessary to replace the Landing Indication components with optional Fluid Retention parts which act like a check valve to maintain a column of fluid in the drill string.

    Fluid Retention Kit
    Part Number Description Qty
    100607 Fluid Retention Kit -
    100452 Stainless Steel Ball, ø22mm 1
    100612 Bushing, Fluid Retention 1
    101138 Bushing, Heavy Mud Fluid Retention 1
    100608 Fluid Retention Compression Spring, Light 1
    100609 Fluid Retention Compression Spring, Medium  1
    100610 Fluid Retention Compression Spring, Heavy 1
  • Section 7 Body: 
    Part Number Description Qty
    100557 Overshot Assembly -
    100605 Overshot Head Assembly -
    100518 Cable Swivel Eye Bolt 1
    100519 Cable Swivel Collar 1
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 1
    100461 Grease Fitting 1
    100523 Cable Swivel Body 1
    100524 Jar Staff 1
    100525 Jar Tube Assembly 1
    100534 Locking Sleeve 1
    100526 Hex Nut, 3/4" UNC 1
    100527 Nord-Lock Washer 1
    100536 Overshot Head Body 1
    100533 Set Screw 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    100531 Lifting Dog Pivot Pin 1
    100532 Sway Pin 1
    100535 Pin Link 2
    100539 Self Locking Cap Screw 4
    100692 Overshot Loading Fork Tool 1
    100690 Overshot Loading Funnel 1
  • Section 7 Body: 
    Part Number Description Qty
    101779 Overshot Spares Kit -
    100520 Thrust Bearing 1
    100521 Castle Nut 1
    100522 Cotter Pin 2
    100461 Grease Fitting 1
    100526 Hex Nut, 3/4" UNC 1
    100529 Compression Spring, Lifting Dog 1
    100530 Lifting Dog 2
    101498 Lifting Dog Pivot Pin 1
    100807 Sway Pin 1
    101487 Pin Link, Overshot 2
    100533 Self Locking Cap Screw 4
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Application
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Application
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Specifications
  • Section 2 Title: Cementing Application
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Chemical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Application
  • Section 2 Title: Quality Control Test Criteria
  • Section 2 Title: Application
  • Section 2 Title: Setting Time
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Chemical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Specifications
  • Section 2 Title: Reference Table
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Packaging & Controls
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Concentration
  • Section 2 Title: Concentration
  • Section 2 Title: Concentration
  • Section 2 Title: Concentration
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Concentration
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Concentration
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Concentration
  • Section 2 Title: Concentration
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Application
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Repair Kits
  • Section 2 Title: Bulldog Pitless Adapters
  • Section 2 Title: PVC K-Packers
  • Section 2 Title: Premier Silica (NSF Certified)
  • Section 2 Title: Premier Silica (NSF Certified)
  • Section 2 Title: Slotted PVC Casing
  • Section 2 Title: Casing Protector Sizes Available
  • Section 2 Title: Rotary
  • Section 2 Title: Dual Coil with U-Bend Cap and Air
  • Section 2 Title: Anchors Available
  • Section 2 Title: Head Assemblies
  • Section 2 Title: Schedule 40 F-480
  • Section 2 Title: PVC Centralizers
  • Section 2 Title: Cast Iron Well Seals
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Well Development
  • Section 2 Title: Damaged Wells
  • Section 2 Title: Damaged Wells
  • Section 2 Title: Well Development
  • Section 2 Title: Surge Blocks available for 4” Wells
  • Section 2 Title: Specifications
  • Section 2 Title: 2" HydraSleeve - 1 Liter
  • Section 2 Title: 4" HydraSleeve - 2.5 Liter
  • Section 2 Title: SuperSleeve Top Weight & Spring Clip
  • Section 2 Title: 8 oz. Bullet Weight & Weight Clip
  • Section 2 Title: 0.45 Micron FHT-45 - High Turbidity
  • Section 2 Title: Kwik Klamp 2
  • Section 2 Title: Placing Casing Pack
  • Section 2 Title: Sizes Available
  • Section 2 Title: Pipe Assembly
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: PVC Threaded Caps
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Optional Item
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Optional Items
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Requirements
  • Section 2 Title: Specifications
  • Section 2 Title: Specifications
  • Section 2 Title: Features & Specificiations
  • Section 2 Title: Specifications
  • Section 2 Title: Data Acquisition Features
  • Section 2 Title: Control & Processing
  • Section 2 Title: Control & Processing
  • Section 2 Title: Control & Processing
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Guaranteed
  • Section 2 Title: Features & Benefits
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: Toxicity Analysis
  • Section 2 Title: Characteristics
  • Section 2 Title: Characteristics
  • Section 2 Title: Characteristics
  • Section 2 Title: Typical Toxicity Analysis
  • Section 2 Title: Application
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Application
  • Section 2 Title: Accessories
  • Section 2 Title: Optional Equipment
  • Section 2 Title: Optional Equipment
  • Section 2 Title: Gardner Denver 5.5 x 8 Duplex Mud Pump Parts
  • Section 2 Title: Packaging & Controls
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N3 Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: BTW Sizes Available
  • Section 2 Title: N Sizes Available
  • Section 2 Title: H Sizes Available
  • Section 2 Title: NW Casing Advancer Assembly and Parts
  • Section 2 Title: BU Compact Plus Water Swivel Spares Kit and Parts
  • Section 2 Title: BU Compact Plus Water Swivel Assembly
  • Section 2 Title: N Rod Gauge
  • Section 2 Title: N Bit Gauge
  • Section 2 Title: BU Core Barrel Assembly & Options
  • Section 2 Title: N Conversion Kit & Head Assembly
  • Section 2 Title: BU Head Assembly & Options
  • Section 2 Title: BU Core Barrel Kit
  • Section 2 Title: N Core Barrel Spares
  • Section 2 Title: N Extended Core Barrel Option
  • Section 2 Title: BU Overshot Assembly
  • Section 2 Title: N Overshot Assembly - Rolling
  • Section 2 Title: N Overshot Spares
  • Section 2 Title: K&E Sand & Gravel
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Optional Equipment
  • Section 2 Title: Physical Properties
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Mixing & Handling
  • Section 2 Title: Physical Properties
  • Section 2 Title: Physical Properties
  • Section 8 Body: 
    Part Number Drilling Parameter Edge Series Waterway Configuration
    101222 H3 2-4 Edge 2 Abrasive Superflush
    103546 H3 2-4 Edge 2 Abrasive Wide
    101053 H3 4-6 Edge 5 Superflush
    103420 H3 4-6 Edge 5 Wide
    102481 H3 6-8 Edge 6 Abrasive Superflush
    101221 H3 6-7 Edge 6 Superflush
    101957 H3 6-7 Edge 6 Wide
    101722 H3 7-8 Edge 7 Superflush
    103630 H3 7-8 Edge 7 Wide
    101231 H3 6-8 Edge 7 Endurance Superflush
    101246 H3 6-8 Edge 7 Endurance Wide
    102321 H3 7-8 Edge 8 Superflush
    1034